Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   TWM Shift Knob & TWM as a Company - WTF? (http://www.the370z.com/nissan-370z-general-discussions/94040-twm-shift-knob-twm-company-wtf.html)

iCraigerz 07-18-2014 12:11 PM

I've sent TWM the link to this thread...

Zbrah 07-18-2014 12:11 PM

Nice knobs :yum: ;)

wheee! 07-18-2014 12:13 PM

I received outstanding service and customer support when I ordered replacement parts for my short shifter a while ago, including quick replies and fast shipping in secure, well packaged envelopes.

(I bought a used TWM shifter that was missing most of the parts from the removal by a mechanic. TWM sold me the parts I needed and was very helpful)

You're situation indeed could be related to a customs inspection. That's really too bad because their products are really top notch...

kenchan 07-18-2014 01:38 PM

Quote:

Originally Posted by LostSol (Post 2900425)
Oh I've seen them, yes they are nice, but $200 for a cnc'd and drilled hunk of steel is excessive.

not if you're like me and can't whip one out of my arse at home... :ugh:

kenchan 07-18-2014 01:42 PM

Quote:

Originally Posted by wheee! (Post 2900440)
I received outstanding service and customer support when I ordered replacement parts for my short shifter a while ago, including quick replies and fast shipping in secure, well packaged envelopes.

(I bought a used TWM shifter that was missing most of the parts from the removal by a mechanic. TWM sold me the parts I needed and was very helpful)

You're situation indeed could be related to a customs inspection. That's really too bad because their products are really top notch...

very good point indeed!

especially on small heavy articles like this, they might think it is some sort of
artillery.

onzedge 07-18-2014 05:21 PM

Quote:

Originally Posted by LostSol (Post 2900425)
Oh I've seen them, yes they are nice, but $200 for a cnc'd and drilled hunk of steel is excessive.

:iagree:

cooltoy 07-18-2014 05:41 PM

Quote:

Originally Posted by kenchan (Post 2900391)
Ballcock Shank Washer Beveled - Faucet Washers - Amazon.com


here... not silver. brushed stainless finish with the modded shankwasher below.

http://www.the370z.com/members/kench...19-closeup.jpg

I did not need to see the WildmanT Ball Lifter Protruder White at the bottom of that page.

Arrvaxx 07-18-2014 05:44 PM

Quote:

Originally Posted by cooltoy (Post 2900811)
I did not need to see the WildmanT Ball Lifter Protruder White at the bottom of that page.

I was like, "WTF is he talking about?" Then I clicked on the link! LOLOLOLOLOL.

I ordered mine...the ring not the Ball Lifter!

kenchan 07-18-2014 06:54 PM

Quote:

Originally Posted by cooltoy (Post 2900811)
I did not need to see the WildmanT Ball Lifter Protruder White at the bottom of that page.

:rofl2: lol

aszyd 07-18-2014 07:50 PM

I wonder if some people went to that page and were disappointed to see just a standard piece of hardware, not something else.

My recent TWM experience is mostly positive. I ordered a knob and shifter, a few days later they emailed me saying that my order would be delayed by 10 days because they were out of stock. 10 business days later, my shipping notice arrived. There were no issues with the packaging.

Shotta 07-18-2014 09:20 PM

Did it look like the box was opened and resealed? Normally customs should be slapping an inspected sticker on there if they opened the box. If they did open it and dropped it, they certainly would not care and I don't think there's any way to make a claim against damaged caused by their inspection.

iCraigerz 07-18-2014 10:00 PM

Quote:

Originally Posted by Shotta (Post 2900995)
Did it look like the box was opened and resealed? Normally customs should be slapping an inspected sticker on there if they opened the box. If they did open it and dropped it, they certainly would not care and I don't think there's any way to make a claim against damaged caused by their inspection.


Honestly man, no, the package did not appear to have been opened prior to me receiving it. What really gets me is that (and I forgot to mention this earlier) I spoke to them yesterday before emailing them the pics and was told not to worry and they'd replace it. I will say however, that I did have to call them even after leaving a message, and the guy was pretty rude and short with me. It's obviously not my fault. And besides, wtf ever happened to "the customer is always right". It's because of sh*t like this that makes me almost exclusively order from companies like Amazon.


Sent from my iPhone using Tapatalk.

nogoodname 07-18-2014 11:02 PM

Who did you speak to at TWM? Send me a PM. I'm local and friends with them.

TWM_shift 07-19-2014 09:09 AM

Hey Guys,

First off, thank you to all of you who support our small company, we try very hard to get it right, every time, all the time. We even use a third party quality rating system to ensure independent customer reviews which you can find in the top right of our TWM Performance Home Page by "Shopper Approved".

Two issues here:

1. Drop scratches on the TWM Performance Big Type R shift knob whodunnit. Was it TWM Performance, no, see the OP's quote of our reply at the beginning of this thread. We do photograph all outgoing orders to avoid situations like this. Was it the OP? The answer is also no, how do we know, he posted the answer right in this thread! When looking at the pictures of the closed box one finds a small yellow customs sticker, which must be affixed when packages are inspected! Case closed, remedy to follow.
https://fbcdn-sphotos-c-a.akamaihd.n...60582620df15b7
2. Big Type R Satin vs Graphite, Satin finish is simply a sandblasted stainless steel shift knob. Graphite is the same except that it is, in addition, DLC (Diamond Like Carbon) finished. The finish name "Graphite" was previously "Flat Black" after a change in suppliers for this finish we found that it was lighter than previously so we re-named it. We have literally hundreds of pics of these two finishes all over the web, please Google and compare.

Remedy

We propose that the OP return the damaged shift knob and we will replace it, free of charge, with either a Satin or a Graphite Big type R Shift Knob

As we are not responsible for the damage, we would only ask the OP to be responsible for the shipping.

Hope this helps,

Dan
Team TWM Performance

iCraigerz 07-19-2014 01:12 PM

Quote:

Originally Posted by nogoodname (Post 2901049)
Who did you speak to at TWM? Send me a PM. I'm local and friends with them.


Man I wish I knew!



Sent from my iPhone using Tapatalk.


All times are GMT -5. The time now is 07:11 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2