Nissan 370Z Forum - Low Clearance problems

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)

- - Low Clearance problems (http://www.the370z.com/nissan-370z-general-discussions/40802-low-clearance-problems.html)

Red__Zed

09-17-2011 05:44 PM

The black plastic is fine to scrape. I was dropped on swifts, and then sitting an inch lower than that because of the tires I was running and I was fine.

PapoZalsa

09-17-2011 05:59 PM

Quote:

Originally Posted by Masa (Post 1252783)

Yup, dropped on Teins and I am debating on removing the ramp guard things but too lazy to - and they do no harm when they do scrape.

You are dropped on Swifts, I'm dropped on TEINs, remember. ;)

Red__Zed

09-17-2011 06:01 PM

Quote:

Originally Posted by BeachZTT (Post 1252779)

We drop it another inch or so with springs or coilovers. :tiphat:

Seriously, mine is lower on Swift Springs and I only scrape the outer tab on the lower front air dam. Some people trim them.

mine eventually got torn off at the last autocross i ran:ugh2:

Mt Tam I am

09-18-2011 09:08 AM

2 Attachment(s)

I will modify someone else's statement; "If you don't have any scrapes, you are not driving the car properly."

I like the ramp idea if that will help. I did all this without driveway issues.

Astrosfan

09-18-2011 02:06 PM

id prefer to hear the black plastic scrape than my front bumper, it lets me know im getting close. Just get a razor blade and scrape the plastic smooth. if it gets real bad, replace it

All times are GMT -5. The time now is 10:36 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page