Passenger window doesn't "seal" back up
 

So I rarely have passengers but noticed today that when closing the passenger door it doesnt pop up after being closed like the drivers side does. Learnt this by having a little water on my dash after spraying her down. Anybody else have this issue? I guess Ill have the dealership check it out at my first oil change next week.

:tiphat:

some threads on here advise resetting window hold down for 10 secs then up for 10 secs. search it you will find it. hope that is all you need done.

this happened to me on the drivers side after my alarm was installed. but i noticed right when i drove away so they fixed it. It would lower down to open, then not go back up when i closed it. then when i opened again it would go down more.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

Thanks the reset worked perfectly- dropping her off to get detailed in the morning. Was gonna do it myself but its hot as hell here and after doing the math my day off was infinitely more valuable than a whole day spent doing it myself.

It's an old Nissan bug. My wife's P'finder suffers from it, too (driver's side). I already replaced my Z's driver's side one, also---$160+40 (part plus install, total 200).