DDMotorsports Shop 370Z Baseline Dyno - UGLY Torque Curve
Took the shop 370Z down to get a baseline dyno while it is still stock. Numbers are 285.46whp and 243.40wtq (ignore the max torque number on the chart as it is inflated due to spikes).
Anyways, I was just as shocked as you probably are to see such an ugly and scary torque curve. This car is 100% stock and I am hoping that its just a bad batch of gas. Discuss. http://www.doubledownmotorsports.com...edynochart.jpg http://www.doubledownmotorsports.com...selinedyno.jpg <object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/1ilq5O0MBew&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/1ilq5O0MBew&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> |
Yikes!!! Tune tune tune!!!!
|
That doesn't seem right. How is the HP curve so smooth if the Tq curve is so jagged? Considering HP is just a calculation of Tq?
|
Quote:
|
^^^ Yes.
|
They had a 750whp Mustang on the dyno right before me and it was reading just fine. Go figure...
|
Something is not right, I've never seen one like that.:icon14:
435 torque, yeaaaaa! |
ya I say sensor glitch in your dyno. The curve looks right if you through out the spikes.
|
I also don't see how the HP could be so steady while the torque jumped all over the place like that.
On a dynojet from another thread.. http://www.z1motorsports.com/imageGa...line.sized.jpg Numbers are close if you leave ou the spikes on yours. |
Tooooooo ugly to be right
|
I'm gonna go ahead and say something's not right with that curve......
re dyno? |
Nice numbers :tup:. But as many suggested, redyno it. Run a full tank of 93 premium and then dyno may be? BTW, your 370Z is the best looking out of all (injected and GTM). I am a biggest Silver fanboi. Silver > ALL > White > Yellow.
When can we expect a video? :excited: |
Nothing is wrong with the car. What needs fixing is the dyno (most likely a software issue)
|
Through some VP16 in that bad boy!! :tup:
|
Agreed Skaterbasist, the dyno itself looks to been erroring. I would have expected several pulls to be overlaid to show tolerance instead of one magic pull [or in this case, poor data pull]. If we ignore the spikes in the data, the torque curve looks fantastic; ruler flat and very good numbers in regard to rated engine output.
--->DDM; do you have the rest of the pulls that you did? Also, if that's not your dyno, they owe you clean error-free pulls! Also, did you do any datalogging to observe engine operation beyond roller numbers? Ignition timing, MAF, AFR, EGT, IAT, ECT, etc.? |
AK370Z - Thanks! I took video, but it didn't come out. Something is screwed up with the sound. I will use a different camera for the re-dyno.
Ryephile - Sorry, just did a quick baseline dyno. Nothing fancy. The only other pull we did the guy did in 4th gear instead of 5th so we scrapped it. |
They are going to try and get me back on the dyno today.
|
Quote:
:ughdance::tup: |
oh...jeez..the Z's have a bad case of indigestion.....
that's just weird...lol The G37's wasnt like that |
Aren't torque spikes like that about impossible?
|
Well, they never called me back yesterday to tell me to come down and re-do the dyno. I guess we will have to wait until Monday.
|
Going back to their dyno tomorrow at 2pm PST for a re-do. If the result is still the same, the only other DynoJet in town can get me in on Saturday morning.
|
Re-did the dyno today at the same shop. Much better, but a tad lower numbers...
http://www.doubledownmotorsports.com...elinedyno2.jpg |
Quote:
edit nvm saw it has more pages than i thought |
that looks much better... ^
|
First post updated with video. My apologies for the terrible sound and lighting. I am new to this whole video thing. :)
|
It's just the RPM pickup.
Here's an MR2 doing something very odd (or amazing) with a bad coil signal. Yes, that's about 1500 ft/lbs of torque. Obvioulsy an error. These are hardware issues with not getting a clean signal, not something inside the Winpep software. http://www.mrtwo.net/mr2modproject/i...car/torque.jpg |
LOL! 1500Lbs of torque in an MR2!!! If that were true, that car would do donuts like an AWD car!
|
mmm nothing like STI "axis spins" lol
|
Quote:
^^ Reported. |
Those prices are pretty good!
|
Quote:
|
All times are GMT -5. The time now is 01:24 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2