Need help! Would these Works fit?
 

Hey everyone, I’ve done research on sizes and offsets of Work VS XX a lot of people have gone with but non like these specs.

I have the sport breaks and wondering if these work wheels will fit. I have my BC racing coils waiting for me to put them on.

Brand NEW
- Brand/Model: Work VS-XX Step Lip
- Bolt Pattern: 5x114.3
- Front: 19x9.5+19
- Rear: 19x10.5+19
- Color: Gold
- Price: $3200

I hope this image upload thing works

https://ibb.co/ddjDKd

Any help in here?


http://www.the370z.com/wheels-tires/...it-thread.html

Unsure about the wheels clearing the brakes; but the offsets are more aggressive up front vs. what's quoted for rears.

I went through that and I didn’t see any +19 :/

The diameter of the wheels does not effect how far the wheels stick out, only the offset and the width matter. If you can find the same offsets and widths in any other diameter, then you'll have your answer.

Need to know the “Disk” type to verify.


Sent from my iPhone using Tapatalk

:iagree:

Likely need T-disk (or maybe R-disk) to clear sport calipers in the front. The VS-XX spoke design is very flat from bore to lip. Work's VS-XX chart shows a +19 offset for a 19x9.5 but it is for the A-disk. If that is the case, you'd need a spacer to increase disk size and then you might have more poke than you want.