Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nismo 370Z (http://www.the370z.com/nismo-370z/)
-   -   Cnt hfc's ordered! Should be on next week! (http://www.the370z.com/nismo-370z/59060-cnt-hfcs-ordered-should-next-week.html)

MONISMO370Z 08-12-2012 07:05 PM

Cnt hfc's ordered! Should be on next week!
 
Hello to all my fellow 370z nismo owners! Hope your enjoying your final summer days !.:tup: So I decided to post up my second engine mod because I'm really interested in hearing exhaust sound change on my 2012 nismo and interested in hp gain's from the CNT HFC'S. If anyone has a nismo with this setup I'm definitely interested in hearing your feedback on it. Should be in on this up-coming thurs. Here is a pic again of the CNT HFC'S! Keep you all posted.
Mo

Current engine mods:

Takeda Short Ram intakes
CNT HFC's (on order) :tup:


CNT Racing High Flow Cat Pipes (350Z 2007-2008 / 370Z 2009-2010) 20-9387-350Z - Modern Automotive Performance

http://img.photobucket.com/albums/v629/bigmosrt/erz.jpg

MJB 08-12-2012 07:58 PM

Nice! Are you going to install them yourself?

MONISMO370Z 08-12-2012 08:30 PM

I would.. If I had tools and lift. Already setup appointment at friend's shop. I'll post pics and videos when done.

forza370z 08-12-2012 10:15 PM

Yes. Pix and videos please!:tup: I am interested to see how stock nismo CBE + HFC sound like.

chops 08-12-2012 10:23 PM

i have them as well. id suggest buying some different gaskets and a new set of bolts. the ones supplied were absolutely terrible. otherwise, they've been running great for me at almost 20k miles (i got them on within the first thousand miles hehe). another problem is that you will eventually get a SES light. either buy some o2 extenders (z1 sells a pair) or stuff a thickly rolled ball of steel wool into the o2 bung

MONISMO370Z 08-12-2012 11:04 PM

Quote:

Originally Posted by chops (Post 1865447)
i have them as well. id suggest buying some different gaskets and a new set of bolts. the ones supplied were absolutely terrible. otherwise, they've been running great for me at almost 20k miles (i got them on within the first thousand miles hehe). another problem is that you will eventually get a SES light. either buy some o2 extenders (z1 sells a pair) or stuff a thickly rolled ball of steel wool into the o2 bung

Any videos? Dyno's? On my 08 HR I was running Berk TP's and had steel wool in it.. bought it from a guy off my350z.com check engine would come on every couple hundred to thousand miles and go away by itself sometimes for the most part it was good enough. I know these should come with extenders if not I'll get it.. A a new pair of bolts is something I'll definitely look into.

Thanks for headsup!

Mo

chops 08-12-2012 11:09 PM

Quote:

Originally Posted by MONISMO370Z (Post 1865478)
Any videos? Dyno's? On my 08 HR I was running Berk TP's and had steel wool in it.. bought it from a guy off my350z.com check engine would come on every couple hundred to thousand miles and go away by itself sometimes for the most part it was good enough. I know these should come with extenders if not I'll get it.. A a new pair of bolts is something I'll definitely look into.

Thanks for headsup!

Mo

no videos or dynos, but the tone definitely gets a little deeper. unfortunately you'll also be introduced to rasp (acceleration) and hiss (deceleration). the steel wool trick has worked for me. i used to get the SES light every few hundred miles until i tightly rolled a ball of steel wool and stuffed it in there. i havent had a SES light in almost 20k miles!!! the bolts included are cheap, so i replaced them with higher quality grade 8 bolts.

oh and id say its butt dyno approved as well :)

MONISMO370Z 08-12-2012 11:27 PM

Quote:

Originally Posted by chops (Post 1865481)
no videos or dynos, but the tone definitely gets a little deeper. unfortunately you'll also be introduced to rasp (acceleration) and hiss (deceleration). the steel wool trick has worked for me. i used to get the SES light every few hundred miles until i tightly rolled a ball of steel wool and stuffed it in there. i havent had a SES light in almost 20k miles!!! the bolts included are cheap, so i replaced them with higher quality grade 8 bolts.

oh and id say its butt dyno approved as well :)

Sweet man! Thanks alot. I'll be sure to get some steel wool! Rasp and Hiss seem inevitable lol ! However some people with stillen cbe,meister cbe, indivia gemini exhaust combo w. hfc's are saying otherwise and seems for the most part you cannot hear hiss in the video's. Though I want to keep the Nismo exhaust because I wanna keep it somewhat true to it's name lol since I already changed the wheels.

fuct 08-13-2012 08:33 AM

http://www.the370z.com/intake-exhaus...ps-broken.html

best of luck...

chops 08-13-2012 11:01 AM

not sure with the TP's, but the HFC's dont have an elbow in the O2 sensor bung. its extended, and the weld looks pretty solid to me. i havent had any issues in 20k miles and i reguarly check as im under the car. YMMV as always

MONISMO370Z 08-13-2012 05:45 PM

Quote:

Originally Posted by fuct (Post 1865721)

really?! It should have lifetime warranty if I'm not mistaken as long as it was purchased brand new and not via forums. Sorry to hear. Hopefully mine don't turn out that way.

fuct 08-13-2012 05:52 PM

Quote:

Originally Posted by chops (Post 1865963)
not sure with the TP's, but the HFC's dont have an elbow in the O2 sensor bung. its extended, and the weld looks pretty solid to me. i havent had any issues in 20k miles and i reguarly check as im under the car. YMMV as always

i had to add the CNT branded elbow to rid my car of the CEL.... it didnt help. waste of $70 extra bucks.

MONISMO370Z 08-13-2012 06:50 PM

^ Try the steel wool stuff it worked pretty good on my 08 HR. ^

chops 08-13-2012 10:38 PM

Quote:

Originally Posted by fuct (Post 1866731)
i had to add the CNT branded elbow to rid my car of the CEL.... it didnt help. waste of $70 extra bucks.

ah...yea in that case, sounds like a total waste of money. z1 sells some o2 extenders that work. also...like i said above, the steel wool trick works wonders. the key is to put on a pair of gloves, and roll a tight ball just big enough to fit into the sensor hole!

MONISMO370Z 08-13-2012 11:18 PM

Is this what you got chops? I'm gonna get it before I go to get HFC's installed this thursday. Let me know thanks!

Rhodes American/12 pcs. steel wool pad assorted (10121114) | Body Repair and Accessories | AutoZone.com

http://www.walmart.com/ip/Rhodes-Ame...-Wool/17300263

chops 08-14-2012 01:15 AM

thats exactly what i bought! just roll it into a nice thick ball. be careful though...id suggest wearing gloves. that **** can get stuck in your hand

fuct 08-14-2012 08:02 AM

Quote:

Originally Posted by MONISMO370Z (Post 1866817)
^ Try the steel wool stuff it worked pretty good on my 08 HR. ^

i did... kept stuffing steal wool until it would just all burn out. even stuffed it with wool AND added the bung extenders.


crap product if you ask me. i should have not been a cheap-o and bought the GTM ones. oh well back to my factory cats...

chops 08-14-2012 12:12 PM

Quote:

Originally Posted by fuct (Post 1867433)
i did... kept stuffing steal wool until it would just all burn out. even stuffed it with wool AND added the bung extenders.


crap product if you ask me. i should have not been a cheap-o and bought the GTM ones. oh well back to my factory cats...

like i said above, you have to roll the steel wool into a tightly packed ball just big enough to fit in the bung. the first time i tried steel wool i just packed it in there and it all burnt up after a quick drive around the block. rolled it up into a tightly packed ball and voila...20k miles later and its still there

fuct 08-14-2012 12:59 PM

Quote:

Originally Posted by chops (Post 1867860)
like i said above, you have to roll the steel wool into a tightly packed ball just big enough to fit in the bung. the first time i tried steel wool i just packed it in there and it all burnt up after a quick drive around the block. rolled it up into a tightly packed ball and voila...20k miles later and its still there

again, i did............ it would work about 2 weeks then the light would come back on. i tried packing it medium tight and it didnt work. then i tried cramming the sh1t in there so that barely exhaust gas could even get to the sensor. again it worked a few weeks then lights right back on.

in the end im actually happier w the factory cats back on. the smell and hiss were getting on my nerves.

MONISMO370Z 08-14-2012 04:34 PM

^ Did you have cnt test pipes? or hfc's?

Update: Fedex delivery showing they should be at the shop tomorrow 8/15/2012. Keep you posted!

fuct 08-14-2012 05:45 PM

TP's which prob flow more air causing the wool to come loose and fall out in time.

im just giving you a heads up about the quality of their parts. i hope you have zero issues and it all goes smooth.

also i had to buy all new hardware with mine. and the factory gaskets had to be reused. the studs are welded onto the factory cats.

MONISMO370Z 08-14-2012 06:28 PM

Thanks man. I hope all goes well too. Do you have any videos or sound clips?

fuct 08-15-2012 11:14 AM

Quote:

Originally Posted by MONISMO370Z (Post 1868427)
Thanks man. I hope all goes well too. Do you have any videos or sound clips?

me? no sure dont. best way to explain the sound..... when you let off the gas make a whhhooooooshhhhissssss sound with you mouth. ;)


jkjkinda

MONISMO370Z 08-16-2012 04:36 PM

Cnt's hfc's installed! Perfect bolt on for your nismo!
 
Good News Installed yesterday! Love em! Perfect sound an barely any rasp!

Install went pretty smooth took only about an hr or so tops for both. Stuffed a ball of steel wool grade 3 into extenders as well as o2 bung. No check engine yet drove about 80 miles so far. Sound is deep n throaty! depends on what rpm level you are at, basically it sounds like a stock Nismo except louder and deeper an definitely not annoying. They are perfect so far from what I noticed compared to my 08 HR and its great for daily driving. A+ Highly recommended to everyone looking into HFC's. HP gains are definitely noticable toward mid to higher rpm's and especially at high speeds above 60mph's and throttle response it much better. CNT's seems to have made high quality parts and we also used the bolts/gaskets that came with it my mechanic said they appeared to be pretty good quality and fitment was perfect. Overall pretty impressed with CNT'S HFC'S and I know the sound will only get deeper.

Reasons to buy CNT's HFC's

  • Great sound (deeper, throaty)
  • Throttle response (increased)
  • Much lighter than stock Cat's
  • Definitely noticeable HP's gains mid to high rpm's (4,000 rpms +)
  • Easy bolt on install with tools and lift!


No smell like TP's!
No check engine! (make sure to put in steel wool into 02 bung's and extenders)


Keep you all posted with video sound clips.

Thanks for looking!

http://img.photobucket.com/albums/v6...8-15155104.jpg
http://img.photobucket.com/albums/v6...8-15155055.jpg
http://img.photobucket.com/albums/v6...8-15155149.jpg
http://img.photobucket.com/albums/v6...8-15154759.jpg
http://img.photobucket.com/albums/v6...8-15154812.jpg
http://img.photobucket.com/albums/v6...8-15154746.jpg
http://img.photobucket.com/albums/v6...8-15160205.jpg
http://img.photobucket.com/albums/v6...8-15162834.jpg
http://img.photobucket.com/albums/v6...8-15162821.jpg
http://img.photobucket.com/albums/v6...8-15165833.jpg
http://img.photobucket.com/albums/v6...8-15165847.jpg

ERZperformance 08-16-2012 05:06 PM

Quote:

Originally Posted by MONISMO370Z (Post 1872501)
Good News Installed yesterday! Love em! Perfect sound an barely any rasp!

Install went pretty smooth took only about an hr or so tops for both. Stuffed a ball of steel wool grade 3 into extenders as well as o2 bung. No check engine yet drove about 80 miles so far. Sound is deep n throaty! depends on what rpm level you are at, basically it sounds like a stock Nismo except louder and deeper an definitely not annoying. They are perfect so far from what I noticed compared to my 08 HR and its great for daily driving. A+ Highly recommended to everyone looking into HFC's. HP gains are definitely noticable toward mid to higher rpm's and especially at high speeds above 60mph's and throttle response it much better. CNT's seems to have made high quality parts and we also used the bolts/gaskets that came with it my mechanic said they appeared to be pretty good quality and fitment was perfect. Overall pretty impressed with CNT'S HFC'S and I know the sound will only get deeper.

Reasons to buy CNT's HFC's

  • Great sound (deeper, throaty)
  • Throttle response (increased)
  • Much lighter than stock Cat's
  • Definitely noticeable HP's gains mid to high rpm's (4,000 rpms +)
  • Easy bolt on install with tools and lift!


No smell like TP's!
No check engine! (make sure to put in steel wool into 02 bung's and extenders)


Keep you all posted with video sound clips.

Thanks for looking!

http://img.photobucket.com/albums/v6...8-15155104.jpg
http://img.photobucket.com/albums/v6...8-15155055.jpg
http://img.photobucket.com/albums/v6...8-15155149.jpg
http://img.photobucket.com/albums/v6...8-15154759.jpg
http://img.photobucket.com/albums/v6...8-15154812.jpg
http://img.photobucket.com/albums/v6...8-15154746.jpg
http://img.photobucket.com/albums/v6...8-15160205.jpg
http://img.photobucket.com/albums/v6...8-15162834.jpg
http://img.photobucket.com/albums/v6...8-15162821.jpg
http://img.photobucket.com/albums/v6...8-15165833.jpg
http://img.photobucket.com/albums/v6...8-15165847.jpg

I choose not to comment on your initial post because we didn't feel like we want to get involve with the discussion of whether or not this item is good or bad. Of course coming from ERZ Industries we have to be fair in our comment. Can we say everything that we had manufacture are perfect, NO! There are many things in life that are just simply explainable. For this same HFC we had sold so many of them. Once in a while for some strange reason we would get a customer who's some what unsatisfied with the product for any reason.

We usually like to allow the product to speak for themselves and we are very please to know that you are happy with the HFC. Just keep in mind, and the same goes to anyone out there who had purchased any of the CNT Racing products, our company do offer a one year limited warranty for manufacture defect. If you come across with any issue, feel free to contact us.

Thank you

MONISMO370Z 08-16-2012 05:12 PM

Thanks for your input! Never doubted this product!

Thanks again! Will post video sound clips soon!

ERZperformance 08-16-2012 06:43 PM

Quote:

Originally Posted by MONISMO370Z (Post 1872570)
Thanks for your input! Never doubted this product!

Thanks again! Will post video sound clips soon!

Thank you for having confidence in our products. Looking forward to hear the video.

Thankyou

MONISMO370Z 08-21-2012 04:34 PM

Sorry no videos yet.. I attempted to though an failed lol way to busy. Now, I'm just waiting on AAM axle back exhaust should be in friday of this week. I will post videos then! So far no check engine got a couple hundred miles on it. :-)

MONISMO370Z 08-25-2012 07:08 PM

http://img.photobucket.com/albums/v6...8-24123336.jpg
http://img.photobucket.com/albums/v6...8-24123357.jpg
http://img.photobucket.com/albums/v6...8-24123407.jpg
http://img.photobucket.com/albums/v6...8-24124235.jpg
http://img.photobucket.com/albums/v6...8-24124259.jpg
http://img.photobucket.com/albums/v6...8-24124542.jpg
http://img.photobucket.com/albums/v6...8-24124331.jpg
http://img.photobucket.com/albums/v6...8-24151648.jpg
http://img.photobucket.com/albums/v6...8-24151630.jpg

One word.... CRAZY!!! I'll post videos when I get a chance!

ERZperformance 08-25-2012 07:45 PM

A muffler delete is going to be loud.

Gauge 08-25-2012 09:12 PM

o.O

Need audio... time now

MONISMO370Z 08-26-2012 01:43 PM

Crappy quality... better than nothing lol!
 
Off my brother's phone. Quick e-way take off... Sorry this is the best I have for now guys sounds a bit distorted.. Sounds way better in person...or w. better camera lol


IMG_2095.mp4 video by bigmosrt - Photobucket

Armhunter 08-26-2012 07:01 PM

Crazy with no muffler.. In Cali you would get pulled over all the freaking time! They would force you to get a smog...

MONISMO370Z 08-26-2012 09:45 PM

Yup! ^ That sux in cali! Either way I love it.. I'll get some better videos later!

Armhunter 08-26-2012 10:15 PM

Quote:

Originally Posted by MONISMO370Z (Post 1887924)
Yup! ^ That sux in cali! Either way I love it.. I'll get some better videos later!

Yes sir!! Cali has the craziest laws! No side tint, Almost no Mods, front licence plate! I am sure there are more!!

I will never put the front licence plate on. I had a Highway patrol officer who is in my jiujitsu class said he would never put his on either if he has one.
I have tinted windows.. and i am getting Test Pipes!! I dont care!! screw them..
I will keep the stock and switch if needed.

MONISMO370Z 08-26-2012 11:17 PM

^ Yea I've gotten front plate/tints ticket this summer. I have 15% all around and possible looking into stillen front plate holder down the road so I don't have to pay for b.s. tickets lol.

Definitely get tp's great first mod..! yea screw em! lol

ERZperformance 08-29-2012 12:35 AM

Quote:

Originally Posted by Armhunter (Post 1887712)
Crazy with no muffler.. In Cali you would get pulled over all the freaking time! They would force you to get a smog...

Yup a car with no muffler will get pull over in Ca really fast.


All times are GMT -5. The time now is 06:02 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2