Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nismo 370Z (http://www.the370z.com/nismo-370z/)
-   -   Front plate fix (http://www.the370z.com/nismo-370z/54508-front-plate-fix.html)

FrancoPhoto 05-09-2012 08:39 AM

Front plate fix
 
To make a very long story short. I told my dealer on the way to pick up my car not to drill into the bumper and there was a miscommunication and they did intact drill into the bumper.

After meeting With the manager , they agreed to get the holes filled and have the bumper fully repainted.

Is this what you guys would settle for ?

Do I really want a new car to be painted?

But then again what are my other options ?

If I het a new bumper from them it still needs to be painted.

Imnthinking about leaving it alone for the sake of keeping the factory paint.

I just need some advice

bigaudiofanat 05-09-2012 11:18 AM

My 3 week old car had to get repainted. Not from holes but from my DD driving into a concert flower pot.

As long as the shop gets the paint right "and that is a IF" than you should not be able to see the fresh paint from the old.

I know I was very worried with mine being black cherry and the paint matching. However the shop did a fantastic job matching and blending. So it boils down to how good the shop is.

http://i483.photobucket.com/albums/r...7-25092843.jpg

http://i483.photobucket.com/albums/r...3-24161318.jpg

FrancoPhoto 05-09-2012 04:49 PM

very true. they are painting the whole bumper and the car only has 1500 miles and its garage kept

red6spd 05-09-2012 05:02 PM

If it really bothered you I think you could have denied delivery.

LakeShow 05-10-2012 12:42 AM

Quote:

Originally Posted by red6spd (Post 1712477)
If it really bothered you I think you could have denied delivery.

:iagree:

FrancoPhoto 05-10-2012 06:36 AM

Quote:

Originally Posted by red6spd (Post 1712477)
If it really bothered you I think you could have denied delivery.

That wasn't an option in my case. I needed special financing and I was way to excited . It bothers me more now than when I saw it then . Plus this car was hard to find let alone a regular Z

Nismo677 05-10-2012 01:15 PM

3 Attachment(s)
I bought my car used with the plate already installed.(stupid dealer) I didn't like the look but I thought I'd be legal for a change. After I had the car for a few days I decided I didn't like the look. I removed the plate braket and found some small white plastic plugs at Lowes. Put a little clear silicone on the back and popped them in. Since my car is white it worked out well. Doesn't look as good as no holes but better than the plate bracket. I figured in a few years with stone clips the front end might need repainting anyway I could have them repaired then.
Attachment 46541

Attachment 46542

Attachment 46543

Cmike2780 05-10-2012 01:25 PM

It would bother me too.... but I think fixing & re-painting it would be just as good as replacing with a new one. I would just live with it to be honest...leave the front plate. It's one less headache, especially in NY. They never use to pull people over for it, but lately, they do. I have the Stillen bracket on mine. You could always put the Nismo mustache if it really bothers you....and I thought the holes were suppose to be drilled into the plastic/unpainted part?


Edit. Nm, didn't realize it's a Nismo

Gauge 05-10-2012 02:44 PM

I think the plugs don't look too bad. Better than the little divits the car has brand new.

Nismo677 05-10-2012 03:22 PM

1 Attachment(s)
In 2009 I bought a new Black Maxima. I live in Illinois, the car came from a dealer Indiana so there was no front plate on it. I liked the car and really liked that is didn't have a front plate. I decided to buy it but I wanted it cleaned so I could inspect it before I signed any paperwork. The porter took the car in back to hand wash and the first thing he did was put the front bracket on. Unbeleiveable!! I almost told them to keep the car, but being in a state that requires a front plate I decided to take the car and just conform to the law. Again after having it a week or so I found some small black plastic plugs at an Ace Hardware store. Same thing only it was less noticeable being Black. Again, it's not perfect but it's a solution.

Attachment 46546

Pelican170 05-10-2012 03:41 PM

Quote:

Originally Posted by red6spd (Post 1712477)
If it really bothered you I think you could have denied delivery.

I agree. Regardless of what they tell you, you can deny the car if its not exactly what you agreed upon...

I had an issue with getting my nismo and they wanted to drive it from the other dealership about 150 miles. I said no way, its a new car and i dont want that. They asked why? I told them if it comes with paint chips in the front from driving it down, im refusing the car. They said whats the difference if you get paint chips or if we do it driving it down? I laughed and said, "i dont own the car yet if you drive it down"..... They sprung to have it put on a truck and brought down knowing i would refuse it...

Pelican170 05-10-2012 03:44 PM

Quote:

Originally Posted by Nismo677 (Post 1714156)
I bought my car used with the plate already installed.(stupid dealer) I didn't like the look but I thought I'd be legal for a change. After I had the car for a few days I decided I didn't like the look. I removed the plate braket and found some small white plastic plugs at Lowes. Put a little clear silicone on the back and popped them in. Since my car is white it worked out well. Doesn't look as good as no holes but better than the plate bracket. I figured in a few years with stone clips the front end might need repainting anyway I could have them repaired then.
Attachment 46541

Attachment 46542

Attachment 46543

I dont think that looks bad.... good job.

FrancoPhoto 05-10-2012 05:13 PM

Quote:

Originally Posted by Nismo677 (Post 1714156)
I bought my car used with the plate already installed.(stupid dealer) I didn't like the look but I thought I'd be legal for a change. After I had the car for a few days I decided I didn't like the look. I removed the plate braket and found some small white plastic plugs at Lowes. Put a little clear silicone on the back and popped them in. Since my car is white it worked out well. Doesn't look as good as no holes but better than the plate bracket. I figured in a few years with stone clips the front end might need repainting anyway I could have them repaired then.
Attachment 46541

Attachment 46542

Attachment 46543

yea that doesn't look bad at all ....i would prefer this than have a factory painted bumper painted for no real reason .

what wold you call those plug?

koffeegy 05-11-2012 03:03 PM

:iagree:
Quote:

Originally Posted by red6spd (Post 1712477)
If it really bothered you I think you could have denied delivery.


koffeegy 05-11-2012 03:09 PM

I have said it before and I will say it again. Check into a product called "Mower Axle" Here is the website...

Mower Deck Axles,Carrera,Cayman,John Deere,Kubota

It screws into where the front tow hook threads into the frame throught the bumper. No muss, no fuss.:happydance:

NBZ34 05-11-2012 03:43 PM

Quote:

Originally Posted by koffeegy (Post 1716080)
I have said it before and I will say it again. Check into a product called "Mower Axle" Here is the website...

Mower Deck Axles,Carrera,Cayman,John Deere,Kubota

It screws into where the front tow hook threads into the frame throught the bumper. No muss, no fuss.:happydance:


Even less expensive is the STILLEN BRACKET

MDZOwner 05-11-2012 03:45 PM

You can check out my pics as I dont have a clue how to include here (sorry), but in my most recent album the bumper you see was patched and sprayed, and it looks and was finished perfectly...that is no one can tell it looks just like factory.

Mine was done by a local shop that does work on modded cars, but seems to me if its done similarly you will never think about it again...

Hope it goes well!

LakeShow 05-11-2012 04:27 PM

Nice Nismo667, it almost looks like parking sensors.

FrancoPhoto 05-11-2012 04:36 PM

Quote:

Originally Posted by koffeegy (Post 1716080)
I have said it before and I will say it again. Check into a product called "Mower Axle" Here is the website...

Mower Deck Axles,Carrera,Cayman,John Deere,Kubota

It screws into where the front tow hook threads into the frame throught the bumper. No muss, no fuss.:happydance:

thats what I'm getting but i need to fix the holes that the dealer made in my bumper first

Nismo677 05-15-2012 11:37 AM

Like I said. Go to Lowes/Ace Hardware look in the hardware section for white plugs/caps. I think they're made to cover the screw heads to give a finished look. I've seen Black and White only. I'll see if I have any at home. I'll take a picture.

roplusbee 05-15-2012 01:29 PM

If you have a NISMO, then the moweraxle tow hook adapter is the one that you want. The Stillen works with the rest. Check out my albums (Daily one) to see the pics of it installed on a NISMO.

fuct 05-15-2012 03:52 PM

...or modify the stillen bracket.....

Ezra 05-15-2012 10:01 PM

Quote:

Originally Posted by Nismo677 (Post 1714378)
In 2009 I bought a new Black Maxima. I live in Illinois, the car came from a dealer Indiana so there was no front plate on it. I liked the car and really liked that is didn't have a front plate. I decided to buy it but I wanted it cleaned so I could inspect it before I signed any paperwork. The porter took the car in back to hand wash and the first thing he did was put the front bracket on. Unbeleiveable!! I almost told them to keep the car, but being in a state that requires a front plate I decided to take the car and just conform to the law. Again after having it a week or so I found some small black plastic plugs at an Ace Hardware store. Same thing only it was less noticeable being Black. Again, it's not perfect but it's a solution.

Attachment 46546


AUGGHHH!! That would piss me off beyond belief! When I walked into the dealer that was the first thing I said. If it had a front plate, or you guys install one, the deal is off.

I'm in Illinois too. And i simply don't give a sh** about our front plate law. With my old car and my new nismo, i've been driving without a front plate for well over 4 years without an incident. I've gotten speeding tickets before and the officers don't care as long as you're respectful. If I do get pulled over for it I won't BS the officer either. Simply put I will just say I refuse to drill into my bumper and pay the fine.

fuct 05-16-2012 08:45 AM

if the cops in my area didnt care then i wouldnt use one either.

FrancoPhoto 05-16-2012 04:11 PM

Updated pics

http://farm8.staticflickr.com/7085/7...625921b4_b.jpg

http://farm8.staticflickr.com/7232/7...c1189c64_h.jpg

imjbort 05-20-2012 10:06 PM

Just installed the moweraxle kit. Super easy, sturdy, and looks great. Larry shipped it out the next day. Didn't think I would like the offset mount but its slowly growing on me.

Armhunter 05-21-2012 11:52 AM

Im am not going to put one on mine even though I can get a ticket for it. But if I ever did have to put one on.. it would be the one above. The offset looks nice! Best one I have seen.

dmhenderson 05-21-2012 01:04 PM

Quote:

Originally Posted by koffeegy (Post 1716080)
I have said it before and I will say it again. Check into a product called "Mower Axle" Here is the website...

Mower Deck Axles,Carrera,Cayman,John Deere,Kubota

It screws into where the front tow hook threads into the frame throught the bumper. No muss, no fuss.:happydance:

Yep, they're classy as hell and are willing to work with you no matter what.


All times are GMT -5. The time now is 05:23 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2