Nissan 370Z Forum
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nismo 370Z (http://www.the370z.com/nismo-370z/)
-   -   Clutch sticking half way to floor (http://www.the370z.com/nismo-370z/103953-clutch-sticking-half-way-floor.html)

macwest 07-22-2015 12:58 PM
Quote:
Originally Posted by Uxi (Post 3263996)
Service rep told me replaced MC when they did the disc and CSC but apparently lied since the MC wasn't on the invoice...
Posting your failure of the CSC is when I made up my mind to do it in mine. Let me ask you a question do you hear any engine noise (only with windows up) When taking off hard it sounds like valve float or marbles shaking more prevalent when oil hot and revs dropping in Gear. It is annoying. Mac PS I have the Nissan Ester oil in mine.

eastwest2300 07-22-2015 01:28 PM
Quote:
Originally Posted by macwest (Post 3264093)
Mine is at shop now for the install and I'm having them put on an intake . They are using dot 4 some brand made in Germany for fluid in MC and putting in redline in trans which I already did but told me some would come out pulling drive shaft. The intake they are installing is k And N short ram using AFE oil free filters.(that was my decision not there's). Mac
hopefully your clutch fluid is good.. whatever they're using.

macwest 07-22-2015 01:42 PM
1 Attachment(s)
Quote:
Originally Posted by eastwest2300 (Post 3264122)
hopefully your clutch fluid is good.. whatever they're using.
this is it.

Jsolo 07-22-2015 01:55 PM
That's supposed to be good stuff. Used in many european and german cars as OE fluid. I'm not sure about the LV spec, we're not in alaska here.

eastwest2300 07-22-2015 01:58 PM
Quote:
Originally Posted by macwest (Post 3264145)
this is it.
As long as you did your homework and know its made for this car, works under high temps, and does the job, I guess thats all that matters.

Jsolo 07-22-2015 02:23 PM
Here's the press release on the product.

http://www.crpindustries.com/pressre...rake_Fluid.pdf

If it gets to -76F in chicago or NY, then hell has officially frozen over :)

macwest 07-23-2015 04:27 PM
7 Attachment(s)
:happydance:Yeah got my car back with no damage!!!! Here are pics of the old parts and my new KN intake with Dry filters installed. Guys the difference in my shifting is wonderful I don't know if its the fluid or what everything feels better . The sound the intake makes is Awesome but I feel I lost some low end on the Car. Mac

macwest 07-23-2015 04:34 PM
1 Attachment(s)
:eek:And of course a welcome home wash. God I am very sick. Wash it every day need help.
ps the car has so much wax on it the water is flying back at me.

KoolKarmaJoe 07-23-2015 04:39 PM
Quote:
Originally Posted by macwest (Post 3265397)
:happydance:Yeah got my car back with no damage!!!! Here are pics of the old parts and my new KN intake with Dry filters installed. Guys the difference in my shifting is wonderful I don't know if its the fluid or what everything feels better . The sound the intake makes is Awesome but I feel I lost some low end on the Car. Mac
Nice pic's. I'm happy for you to get your Z back.

Sent from my XT1254 using Tapatalk

macwest 07-24-2015 04:25 PM
[QUOTE=KoolKarmaJoe;3265403]Nice pic's. I'm happy for you to get your Z back.

Thanks! the intake sound is addictive. Mac

Uxi 07-24-2015 05:33 PM
Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound.

Love the intakes. Typhoon? Those are on my list...

macwest 07-24-2015 05:52 PM
Quote:
Originally Posted by Uxi (Post 3266351)
Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound.

Love the intakes. Typhoon? Those are on my list...
Yes Typhoon but don't use the kn filters if they don't mess your maf they will mess up the throttle body see pic of the filters I used (oil free) . Mac

need4speed255 07-25-2015 03:07 PM
Quote:
Originally Posted by Uxi (Post 3266351)
Oops, didn't see that part about the noise. No, haven't noticed anything like marbles even when taking off hard. The engine is rather... abrasive at the higher end compared to Honda, but I love the high 'mid-range' I guess you'd call it where it sounds like a machine winding up more than an engine sound.

Love the intakes. Typhoon? Those are on my list...
I think he may be referring to the clutch or driveline. It does make a rattling sound(like marbles) if your take off is not so smooth.

macwest 08-01-2015 07:34 PM
Just to update a week with my heavy duty slave cylinder and kn typhoon and no issues no dash lights from intake and clutch feels great. Mac

macwest 09-09-2015 09:37 PM
still running great no sel light or problems with slave cylinder.Mac


All times are GMT -5. The time now is 04:22 AM.
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2