Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Mid-Atlantic Region (http://www.the370z.com/mid-atlantic-region/)
-   -   ISP Racing - DC/MD/VA (http://www.the370z.com/mid-atlantic-region/69858-isp-racing-dc-md-va.html)

Vicster 04-15-2013 07:25 PM

ISP Racing - DC/MD/VA
 
Has anyone had any experience with Infinite Speed and Performance in Beltsville, MD? ISP Racing – 301.937.8008

There are zero performance shops here in Waldorf - everything is all about pizzazz and body work here so I've been on the search for something somewhat local. Found this place online; seems to have a decent following. Pictures online and on FB page show a couple different GTR's. Just want to see what you folks have to say.

Otherwise, if anyone has any other local suggestions, I'm all ears.

Thanks!

m4a1mustang 04-15-2013 07:29 PM

No experience with or knowledge of them. Waldorf isn't *too* far from AAM Competition in Annapolis Junction. They are a good shop.

StangerGT 04-15-2013 07:38 PM

hmmmmmmm... its near me, i should check it out.

Vicster 04-15-2013 07:49 PM

Quote:

Originally Posted by m4a1mustang (Post 2268421)
No experience with or knowledge of them. Waldorf isn't *too* far from AAM Competition in Annapolis Junction. They are a good shop.

M4a1, as always, thank you!

I had no idea a shop was *so* close that deals mostly with Nissan/Infinity. I am already looking into this. I wouldn't mind doing the few extra miles to get a proper job done.

Any idea on how much they are /hr?

m4a1mustang 04-15-2013 07:53 PM

Not sure what their hourly rate is, but they do do good work. They are actually having an Open House on May 4. That would be a good time to go and check the shop out.

Vicster 04-15-2013 07:56 PM

I put it on the calendar, but if scheduling works out, I may be there before then to get my exhaust installed. Judging by what I am seeing immediately, I feel pretty confident that this will be where I end up. :P

Thanks man!

m4a1mustang 04-15-2013 07:56 PM

No problem! :tup:

eastwest2300 04-15-2013 08:44 PM

Quote:

Originally Posted by Vicster (Post 2268463)
I put it on the calendar, but if scheduling works out, I may be there before then to get my exhaust installed. Judging by what I am seeing immediately, I feel pretty confident that this will be where I end up. :P

Thanks man!

What kind of exhaust did you go with?

Vicster 04-15-2013 09:03 PM

ARK Grip - I finally decided to take the plunge. Seemed to me, from the searching around that I did, that most problems that people have had were either with V1 or self installs. So I decided to pull the trigger and get it installed professionally.

Also managed to get it in before the end of the tax sale. :)

Edit: I just realized that you have one also. :) How do you like it?

Vicster 04-15-2013 09:05 PM

Also picked up 4 20mm ichibas that I wouldn't mind getting on. I don't do any of my own wheel work due to crazy-***-mountainous-driveway.

eastwest2300 04-16-2013 12:06 PM

Quote:

Originally Posted by Vicster (Post 2268583)
ARK Grip - I finally decided to take the plunge. Seemed to me, from the searching around that I did, that most problems that people have had were either with V1 or self installs. So I decided to pull the trigger and get it installed professionally.

Also managed to get it in before the end of the tax sale. :)

Edit: I just realized that you have one also. :) How do you like it?

Dude, I fricken loooove it, you're gonna love it too. Im not trying to toot my own horn here, but honestly its gotta be one of the best exhausts out, hands down.

eastwest2300 04-16-2013 12:08 PM

Quote:

Originally Posted by Vicster (Post 2268584)
Also picked up 4 20mm ichibas that I wouldn't mind getting on. I don't do any of my own wheel work due to crazy-***-mountainous-driveway.

I hope you make it out to the College Park meet this sunday, you'll get to see all the goodies these MAZOC members have done, it'll give you ideas on your next project.

StangerGT 04-16-2013 01:27 PM

Quote:

Originally Posted by eastwest2300 (Post 2269483)
I hope you make it out to the College Park meet this sunday, you'll get to see all the goodies these MAZOC members have done, it'll give you ideas on your next project.

Agreed... some common mods which yield good results include that of the Mustang Mod... just ask M4A1 :tup:

I have the same mod, although they were still working out the kinks with my version...

eastwest2300 04-16-2013 01:31 PM

Quote:

Originally Posted by StangerGT (Post 2269707)
Agreed... some common mods which yield good results include that of the Mustang Mod... just ask M4A1 :tup:

I have the same mod, although they were still working out the kinks with my version...

:icon17:

Vicster 04-16-2013 02:07 PM

Quote:

Originally Posted by eastwest2300 (Post 2269472)
Dude, I fricken loooove it, you're gonna love it too. Im not trying to toot my own horn here, but honestly its gotta be one of the best exhausts out, hands down.

That's all around a great thing to hear...get it...a great thing to hear... ok I'll leave now..

Quote:

Originally Posted by eastwest2300 (Post 2269483)
I hope you make it out to the College Park meet this sunday, you'll get to see all the goodies these MAZOC members have done, it'll give you ideas on your next project.

I have full intentions to meet the MAZOC guys at Lake Presidential before the CPT meet. I'm looking forward to it for sure.

Quote:

Originally Posted by StangerGT (Post 2269707)
Agreed... some common mods which yield good results include that of the Mustang Mod... just ask M4A1 :tup:

I have the same mod, although they were still working out the kinks with my version...

This guy! "Dey call you da' funny man?" :bowrofl:


All times are GMT -5. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2