TBatt

TBatt Wrote :
Last night I found the problem. A connector was not fully seated on the transmission harness that has the hookups for the O2 sensors. There is a single wire connector that goes up near the starter motor that was not seated all of the way. When it was fixed the car started up.
--------------------
Sorry to bug you 6 years after you posted this - but i have having the same trouble (No recent work done to the car)
I checked the switch with an ohm meter and checked the fuse and the only relay i could find in the IPDM.

The wire you referred to .... where did it come from / Go to?
Thanks Tons for any help you could offer.
Dylan

PM’d you !

Crazy enough I'm in Huntsville and have been looking for a new (to me) car. I had test drove a Nismo up at Jerry Damson but it sold before I got the go ahead from my wife. I was wondering if you where available next week to meet up so that I can check out the 370. I'm Montgomery this weekend but will be back in Huntsville on Monday.

-Edward

Sorry for the slow response but I've been crazy busy at work.

Send via PayPal. My account is tbatt@knology.net

Sounds good where do I send the payment and shipping info too?

The complete kit, with shipping in the US is $175.

Hi ,
How much do you charge for your stillen idler pulley and hd belt upgrade ?

Yes, but i don't have them with me at the moment, they are at my office.

Nice car- Roll Tide ('15)!

Can you share your offsets?

Congrats on the new ride! :driving: You'll always be welcome on this forum :tiphat:

Beautiful car. Congratulations. Well deserved. :driving:

Yes, I have production moving along and the biggest hangup is the cast pieces. Without those we cannot do the final welding of the 2 intake pipes. Like Killer said, expect 4 kits to be shipped in...

Be patient guys, this kit is going to be worth waiting for. :driving:

I know what he is up to. There is some internet grumbling going around about copper plugs vs. Iridium/Platinum plugs. Been going on for years. It's just silly. Same thing with Ethanol in the fuel,...

64mm is 2.5". The 36225 is 3.00". Thats what I needed when I went to the 2.85 sc pulley and stock 3.2 jackshaft pulley.

Gauge pressure is different then absolute pressure. They will never read the same. The simplest way to explain the difference between the two is that absolute pressure uses absolute zero as its...

At least, that's what I have been thinking. Someone asked me if I planned to pick up a new Supra. I replied that it is pretty redundant if I have a twin turbo 370z, aside from the Supra having a...

And metal, and a headlight, more metal, bumper attachment point , a supercharger inlet that doesn’t line up with anything, etc.

Autodesk Fusion 360. It’s a pain in the butt!! Sent from my iPhone using Tapatalk

Here is the science behind the velocity stack. http://www.profblairandassociates.com/pdfs/RET_Bellmouth_Sept.pdf I was going to model my own custom stack based on this article. Still may, but...

Yeah, mine used to taper, or not rise as fast. But now after 15 psi, it very slowly drops. Given my boost pressure test to 20 psi, I’m probably not leaking much. There really isn’t anything that...

It depends on what fuel your using. Boost pressure is knock limited.

The real gains have already been made by swapping out from the stock exhaust. The straight through design of any good forced induction exhaust doesn't really create that much of a restriction, unlike...

I call this the Cannon intake. Flow Tests show more than 1400cfm. More to come soon! http://www.the370z.com/members/topgunz-albums-my-pics-picture103517-attach19803-20191122-171117.jpg