JhillTrack Member |
Last Activity: Yesterday 03:01 PM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 4 of 4
-
you can text me at 832 584 7953 for faster response tell me your from 370z forum and i will reply
-
11-15-2017 04:35 PM - permalinklittlejuanitoMr. JHill,
My apologies for not replying sooner. I barely saw this message since you didn't send it to my regular inbox.
Anyhow, thanks so much for your settings, I'm gonna go ahead and give the "Street" version a try and see how I like it. I'll report right after.
As of now, I'm pretty much at stock height, albeit I'm on 18's with smaller diameter tires.
My Rebound settings are 8 front and Rear.
2.0 Front camber 1.8 Rear
0 toe front and a tad in rear.
Sway Bars: Full stiff front and Middle setting on rear. (Stillen).
Car feels very neutral and was able to dialed out a lot of the understeer -
Sure thing. When you start the car, it defaults to VDC-on, just like stock. To enable RaceRom:
1. Turn VDC off
2. Adjust the wheel-slip amount using the cruise control accel/decel. When you press up or down, you'll see the current value displayed on the oil temp gauge. It ranges from 0 to 100% (i.e. off to no-wheel slip) depending on what you set it at. I usually start around 50% and adjust from there. You can change it anytime the car is on.
Friends
Showing Friends 1 to 1 of 1
-
- Rusty
- Ronin Samurai - Assassin
Likes Received
355 Likes
-
Sway liked post by Jhill On thread : Z1 2 piece install problemOk well you didn't specify front or rear or give any real detail of your issue but it sounds like your having issues getting the rear over the parking brake shoes? Is so then you need to turn the...Liked On: 11-18-2017, 11:27 AM
Posted On: 11-18-2017, 12:13 AMZ_ealot liked post by Jhill On thread : tapping noise at idleNo the tapping is from the Evan purge sol duty cycle being commanded on and it normal, they can be loud. Had many Acura customers thing something was wrong with their car but it’s just the purge...Liked On: 11-09-2017, 12:55 AM
Posted On: 11-09-2017, 12:23 AMZ_ealot liked post by Jhill On thread : tapping noise at idleDamn man it's starting to seem like your having every issue possible with your Z.Liked On: 11-08-2017, 04:04 PM
Posted On: 11-08-2017, 04:00 PMAstatenateZ liked post by Jhill On thread : Uneven tire tread wear LR tire?We really going to go down multiple pages for a stanced tire wear issue. Sorry but thats stanced life, do stupid **** to your performance car and get **** results what a shocker.Liked On: 11-07-2017, 11:44 AM
Posted On: 11-07-2017, 03:32 AMJ-Nismo liked post by Jhill On thread : Should dealer replace or repair?Bull. I’ve worked in dealers for years and one thing I can say for certain is the customer that complains the most gets everything. This car sounds like it was in for a warranty repair and if...Liked On: 11-02-2017, 08:25 AM
Posted On: 10-31-2017, 04:13 AMZ_ealot liked post by Jhill On thread : Strong gas smell when startingHmm I’m kind of out of ideas for remote help. Any chance the AC compressor is going out and just poor timing after the cooling service (I highly doubt it)? I’ve never seen one put extra load on the...Liked On: 10-20-2017, 07:52 AM
Posted On: 10-20-2017, 12:20 AMZ_ealot liked post by Jhill On thread : Strong gas smell when startingWell mine were just a screenshot not a log. My scanner has great control for whole vehicle including bi directional control but sadly doesn't log, I have to use Ecutek for that. Yours look like...Liked On: 10-19-2017, 08:13 PM
Posted On: 10-19-2017, 08:06 PMZ_ealot liked post by Jhill On thread : Strong gas smell when startingAll cars use the AF sensors for fuel trim. The mafs + rpm determine what cell on the map the car is in and the AF sensors give the feedback to verify the AF is matching the desired AF. What I was...Liked On: 10-19-2017, 02:19 PM
Posted On: 10-19-2017, 01:10 PMZ_ealot liked post by Jhill On thread : Strong gas smell when startingInteresting read. Apparently Nissan does not work like other cars in terms of their fuel trims. How to read CONSULT printout? - Nissan Forum...Liked On: 10-19-2017, 02:37 AM
Posted On: 10-19-2017, 02:17 AMZ_ealot liked post by Jhill On thread : Strong gas smell when startingWell it won’t have a load calculation because it gets that through the mafs. Without any load calc it will run like alpha n (rpm&tps) and use a map they know will run from internal testing. This...Liked On: 10-18-2017, 11:45 PM
Posted On: 10-18-2017, 10:44 PMlittlejuanito liked post by Jhill On thread : PowerTrixI don’t think he offers either those rates. You’ll be looking at a 12k fr / 10k rear or a 12k fr / 11k rear (swift) for the SS coilovers or 13/11 for the RT coilovers. I went 12/11 SS and they...Liked On: 10-13-2017, 11:38 AM
Posted On: 10-05-2017, 02:24 AMHotrodz liked post by Jhill On thread : PowerTrixI don’t think he offers either those rates. You’ll be looking at a 12k fr / 10k rear or a 12k fr / 11k rear (swift) for the SS coilovers or 13/11 for the RT coilovers. I went 12/11 SS and they...Liked On: 10-05-2017, 07:55 AM
Posted On: 10-05-2017, 02:24 AMHotrodz liked post by Jhill On thread : D2 CoiloversHere mass maybe this will help you. As I said people used to always comment on how ti springs felt different/better than steel and often commented as being "plusher". Now that these new alloy...Liked On: 09-28-2017, 10:53 PM
Posted On: 09-27-2017, 09:47 PMHotrodz liked post by Jhill On thread : D2 CoiloversI don't think there is a difference in force output andI don't believe anyone here is actually thinking that. I believe this whole thing got derailed because of nitpicking terminology. I don't...Liked On: 09-28-2017, 09:10 AM
Posted On: 09-27-2017, 11:37 PMRusty liked post by Jhill On thread : D2 CoiloversHere mass maybe this will help you. As I said people used to always comment on how ti springs felt different/better than steel and often commented as being "plusher". Now that these new alloy...Liked On: 09-27-2017, 10:13 PM
Posted On: 09-27-2017, 09:47 PM
All times are GMT -5. The time now is 03:42 PM.