ChrisDriftBase Member |
Last Activity: 07-01-2021 03:24 PM
- User Lists
About Me
- About ChrisDrift
- Location
- ---
- Drives
- 370Z
-
Signature
- Me drifting/crashing my 350Z and 370Z: https://youtube.com/ChrisDriftVideo
Likes Received
93 Likes
-
-ZS-Carpenter liked post by ChrisDrift On thread : 370Z Drift Comp CarGot one of the manifolds welded up fully so now the turbo on that side is mounted :) Still need to cut a hole in it and branch off for the wastegate before the turbo though. ...Liked On: 11-14-2020, 07:24 AM
Posted On: 11-12-2020, 06:45 PM-ZS-Carpenter liked post by ChrisDrift On thread : 370Z Drift Comp CarCut the chassis legs off (as we'll be replacing them with some tube) https://i.postimg.cc/PxGfdYTr/PXL-20201105-173403787.jpg Then I welded some 3mm thick plates in (which was a nightmare...Liked On: 11-14-2020, 07:23 AM
Posted On: 11-05-2020, 05:11 PM-ZS-Carpenter liked post by ChrisDrift On thread : 370Z Drift Comp CarMade a start on stripping the interior out: https://i.postimg.cc/SKJvCNxb/PXL-20201030-165216311.jpg https://i.postimg.cc/h4939Ycv/PXL-20201030-171438566.jpg ...Liked On: 11-14-2020, 07:20 AM
Posted On: 11-01-2020, 06:54 AM-ZS-Carpenter liked post by ChrisDrift On thread : 370Z Drift Comp CarGot the engine out of the 370 today. I found a thread on this forum where someone lifted the engine using the bolts that normally hold the intake manifold on so I went for a similar technique....Liked On: 11-14-2020, 07:17 AM
Posted On: 10-23-2020, 03:44 PM-ZS-Carpenter liked post by ChrisDrift On thread : 370Z Drift Comp CarCan't say I noticed the shorter wheelbase when I drifted it for the first time last week. Just uploaded the video from that day actually: PcY2YWpJgWk As for the final drive ratio, I'll probably...Liked On: 11-14-2020, 07:17 AM
Posted On: 10-20-2020, 07:49 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarGot the second turbo manifold welded up and tacked the downpipes in place today. Will make a start on wastegate and screamer pipe stuff next week once I get some more welding gas. Can't remember if I...Liked On: 11-14-2020, 06:23 AM
Posted On: 11-13-2020, 07:37 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarGot one of the manifolds welded up fully so now the turbo on that side is mounted :) Still need to cut a hole in it and branch off for the wastegate before the turbo though. ...Liked On: 11-14-2020, 06:22 AM
Posted On: 11-12-2020, 06:45 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarGot a lot more stuff done over the last few days Couldn't find an intercooler core in the right orientation and dimensions that I needed so bought 2 smaller ones and turned them on their side,...Liked On: 11-14-2020, 06:22 AM
Posted On: 11-08-2020, 04:50 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarCut the chassis legs off (as we'll be replacing them with some tube) https://i.postimg.cc/PxGfdYTr/PXL-20201105-173403787.jpg Then I welded some 3mm thick plates in (which was a nightmare...Liked On: 11-14-2020, 06:22 AM
Posted On: 11-05-2020, 05:11 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarPretty much finished taking all the wiring out the front and rear now (ignore the random paint, that will be done properly when everything is finished, and most of the floor in the rear will be cut...Liked On: 11-14-2020, 06:21 AM
Posted On: 11-02-2020, 06:59 AMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarMade a start on stripping the interior out: https://i.postimg.cc/SKJvCNxb/PXL-20201030-165216311.jpg https://i.postimg.cc/h4939Ycv/PXL-20201030-171438566.jpg ...Liked On: 11-14-2020, 06:20 AM
Posted On: 11-01-2020, 06:54 AMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarGot the 350 engine into the 370 chassis today and it went relatively smoothly. Ignore the cuts in the lower aluminium brace - that's certainly not required to get the engine in but it just made...Liked On: 11-14-2020, 06:20 AM
Posted On: 10-26-2020, 07:27 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarGot the engine out of the 370 today. I found a thread on this forum where someone lifted the engine using the bolts that normally hold the intake manifold on so I went for a similar technique....Liked On: 11-14-2020, 06:19 AM
Posted On: 10-23-2020, 03:44 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarCan't say I noticed the shorter wheelbase when I drifted it for the first time last week. Just uploaded the video from that day actually: PcY2YWpJgWk As for the final drive ratio, I'll probably...Liked On: 11-14-2020, 06:18 AM
Posted On: 10-20-2020, 07:49 PMZontheRocks liked post by ChrisDrift On thread : 370Z Drift Comp CarSo here's what the car currently looks like after I'd done a load of mods with the idea of it being a practice car: https://i.ibb.co/9sCGcM8/20201014-155626.jpg (https://ibb.co/Ln2vYGk) ...Liked On: 11-14-2020, 06:18 AM
Posted On: 10-17-2020, 07:06 PM
All times are GMT -5. The time now is 12:58 AM.