ban25Enthusiast Member |
Last Activity: 10-26-2020 10:31 PM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 3 of 3
-
You can still turn it all the way off, just set it to the lowest setting, which will disable traction control entirely. Note that there's still ABS functionality, including "ice mode". The only way to disable that is to cut the yaw sensor (there's a DIY for it). With it on, the car will understeer when trail braking because the system is applying the rear brakes to try and straighten the car. Long story short, just don't trail brake
-
Yea so I got that part but what I was confused about and can't seem to get a solid answer was about the stability portion of the VDC. It seemed from factory with VDC off all stability was off to the point you could spin a 360 and there would be no stability assist to straighten you out (as was tested doing the VDC off test at leguna "warm up" figure 8 in parking lot. So with ecutek VDC off I know wheel "slippage" is now tunable but what happens with the stability assist portion? With VDC on it will use yaw and steering angle to do selective braking to help keep you straight but what about when off now? I haven't been able to go find an empty lot to go play around it and get a feel for it yet.
-
Hey so I got my tune and still adjusting to the quicker throttle but I think I like it, need to give it a couple days before I know. I have asked Seb about the VDC thing a couple time but I am still not completely sure I understand it. Since you have the same thing and go to some of the same tracks I plan to, can I ask you a bit more about it vs Oem?
About Me
- About ban25
- Location
- SF, CA
- Drives
- 17 C7 Z06 M7
-
Signature
- 2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport
Likes Given
169 Likes
-
ban25 liked post by VDC_OFF On thread : More Sidewayz!Got to do my first Tandem and give ride alongs this weekend. Enjoy some video i captured! liJMHCL5p7ELiked On: 01-12-2016, 06:22 PM
Posted On: 01-12-2016, 04:19 PMban25 liked post by Hotrodz On thread : To do List.:iagree:Point made and understood...I'm apologize if you thought I was in disagreement!Liked On: 01-12-2016, 01:23 PM
Posted On: 01-11-2016, 07:45 PMban25 liked post by 03threefiftyz On thread : To do List.I went to the most reputable shop I could find, after much research, and told them to keep me alive....cost was a condition, but secondary to staying upright: ...Liked On: 01-11-2016, 06:45 PM
Posted On: 01-11-2016, 05:23 PMban25 liked post by GSS138 On thread : To do List.Fortunately Corner 3's contingency program is pretty damn good lol. But yeah figure in the neighborhood of 10K+. You can't just buy a $900 bolt in bar, a seat from Ebay, and a Takata 4 point...Liked On: 01-11-2016, 06:43 PM
Posted On: 01-11-2016, 01:48 PMban25 liked post by GSS138 On thread : To do List.Will agree on the safety thing, I am in the middle of it right now. You can't just "install a harness/rollbar" and kablam you are safe. Many many of the "safety" setups I see are not safe at all. ...Liked On: 01-11-2016, 06:39 PM
Posted On: 01-11-2016, 12:08 PMban25 liked post by Hemingway On thread : stock tires, and fish tailingIn wet conditions, never step on the gas and turn the wheel at the same time. Coast through the turns.Liked On: 01-07-2016, 10:10 AM
Posted On: 01-06-2016, 11:55 PMban25 liked post by OMGWTFBBQ On thread : The Varis Arising-II kit is growing on meOh... hi there. https://scontent.xx.fbcdn.net/hphotos-xpf1/v/t1.0-0/p180x540/1468807_1029258553764218_4408117093647229219_n.jpg?oh=b631d297499ce7d7fea023d1b3af86fc&oe=570C218A ...Liked On: 12-31-2015, 08:51 PM
Posted On: 12-30-2015, 07:34 PMban25 liked post by cdoxp800 On thread : Race Capture KickstarterSent this over from another 370z member https://www.dropbox.com/s/cfpzb2mpj42q6ug/370Z%20CAN.xlsxLiked On: 12-31-2015, 08:42 PM
Posted On: 12-29-2015, 07:22 AMban25 liked post by carlitos_370z On thread : ban25's Track Journalnice videos dude! :tup:Liked On: 12-31-2015, 05:28 PM
Posted On: 12-29-2015, 05:38 AMban25 liked post by carlitos_370z On thread : carlitos_370z BuildJust want to share a few pics that i take last Sunday when i was on a trip with my GF :driving: https://farm6.staticflickr.com/5830/23402625073_796ca97d3f_c.jpg (https://flic.kr/p/BE1z6K)image3...Liked On: 12-30-2015, 01:52 AM
Posted On: 12-29-2015, 07:35 AMban25 liked post by phunk On thread : CJM Road Race Fuel Pump, Production Round 4Any time, no rush at this point. We are not close to running out yet. If the pace doesnt slow down, they might actually end up being completed in January. I have a lot of the heavy work done.Liked On: 12-29-2015, 02:34 AM
Posted On: 12-28-2015, 06:28 PMban25 liked post by Dcocci On thread : ban25's Track JournalActually I made a mistake. Its speed VENTURES we're running with. Too many companies with "speed" in the names lol. I'm shooting for Jan 31st at Buttonwillow. I still need a set of tires and brakes...Liked On: 12-28-2015, 01:06 PM
Posted On: 12-27-2015, 06:54 PMban25 liked post by Dcocci On thread : ban25's Track JournalAwesome man! A bunch of us Socal guys are running with speed district in 2016. Hope to see you out there!Liked On: 12-27-2015, 09:37 AM
Posted On: 12-26-2015, 01:08 PMban25 liked post by phunk On thread : CJM Road Race Fuel Pump, Production Round 4References: Conception to Production Round 1 (http://www.the370z.com/track-autocross-drifting-dragstrip/54724-fuel-starvation-control-product.html) Production Rounds 2 & 3...Liked On: 12-15-2015, 12:34 PM
Posted On: 12-14-2015, 01:15 PMban25 liked post by carlitos_370z On thread : carlitos_370z BuildGood Am everyone :hello: lets give an update to my Build :) Well last Saturday I take the Z to a friend and one of my STI mechanics to install the brakes rotors, brake pads and new brake fluid. here...Liked On: 12-14-2015, 05:34 PM
Posted On: 12-14-2015, 08:54 AM
All times are GMT -5. The time now is 01:34 PM.