I have a small instagram video of your car! Nice finally meeting you as well!

Instagram

Thanks Andrew! it was good to see you....and your car....man it looks great!

You're welcome, nice seeing you too brother

Just had to put this here. Thanks to cooltoy for cleaning it up. there was a rooftop on the Z's roofline and the parking lines that he took out.

[IMG]https://farm6.staticflickr.com/5553/...8ea4ce3f_b.jpgmYcooltoyedZ by axmea?, on Flickr[/IMG]


Next on the mod list:

Specialty Z clutch and flywheel combo plus Tilton slave.
Fujimura bumper or just go with the current lip set up and paint scheme but on CF.
New set of brake pads and rear rotors.
CF diffuser is one comes along for cheap.

The skinny on the front nose finisher
 

Here's the skinny on the front nose finisher from Nissan.

Fitment is 99% on mine and dependent of installation. They supply templates for the holes needed to install the nose finisher using nylon rivets and double sided tape. Drilling the right size hole is critical to get the rivets to bite. Too small, it would be difficult to push in and will have a gap. Too large, it would not bite and will rely primarily on the double sided tape. You don't want that.

There was a small gap on my initial install. I was able to fix it after taking the bumper off for my halo install. I pulled the pins from the back side to flush a section onto the bumper and eliminate any gaps.

I know masking tape overkill.

[IMG]https://farm4.staticflickr.com/3895/...62c9736595.jpg026 by axmea?, on Flickr[/IMG]

[IMG]https://farm3.staticflickr.com/2941/...5280839c4d.jpg027 by axmea?, on Flickr[/IMG]

[IMG]https://farm3.staticflickr.com/2941/...a9136d4716.jpg021 by axmea?, on Flickr[/IMG]

[IMG]https://farm6.staticflickr.com/5595/...d644aeffbc.jpg025 by axmea?, on Flickr[/IMG]

[IMG]https://farm4.staticflickr.com/3837/...7a2bb97bdc.jpg019 by axmea?, on Flickr[/IMG]


Finished the finisher install........

[IMG]https://farm3.staticflickr.com/2941/...d918112440.jpg029 by axmea?, on Flickr[/IMG]

[IMG]https://farm4.staticflickr.com/3865/...06f57c5791.jpgADSCN7558 by axmea?, on Flickr[/IMG]

Nice write up. I have been thinking about buying the nose finisher :tup:

Sent from my Android 'cause I'm too lazy to open the computer.

Nismo nose finisher -- I got it at Hammerton's (on amazon) for $269 free shipping but now on sale with free shipping for $234 -- QAB only on their ebay site. Which is still a good deal because PW, PG, and one other color will be at an additional charge.

$351 JapanParts.com
$360 conceptz
$430 NissanUSA.com
$276-385 NissanAutoSport.com depending on color.

Another cooltoy chop!
 

Props for the chops to cooltoy :worship:

https://farm6.staticflickr.com/5604/...e0fa8712_h.jpgtims980r by axmea?, on Flickr

This was shot in a property where the old SR71 was assembled before sending it off to Beale in Palmdale, CA.

https://farm6.staticflickr.com/5611/...c3ccb106_h.jpgDSCN7596a1 by axmea?, on Flickr

Fuji rear diffuser
 

I am getting my hands on one of these tomorrow.
A Fujimura CF diffuser.

http://i732.photobucket.com/albums/w...s/DSC03949.jpg

Your Z is definitely on my favorites' list of awesome looking Zees....I can't wait to get my Fugi vented hood!

I got to get to a meet or something in SoCal....

Fujimura Diffuser Install
 

Bought this Fujumura diffuser brand new from a fellow member. Fitment was spot on. Installation can be done by a 5th grader.

[IMG]https://farm4.staticflickr.com/3931/...46c12245_b.jpgDSCN7681 by axmea?, on Flickr[/IMG]

The back side......

[IMG]https://farm6.staticflickr.com/5605/...07cde7c2_b.jpgDSCN7682 by axmea?, on Flickr[/IMG]

Close up.....

[IMG]https://farm4.staticflickr.com/3945/...ceaecfb6_b.jpgDSCN7684 by axmea?, on Flickr[/IMG]

added two more washers for clearance.......

[IMG]https://farm4.staticflickr.com/3951/...0b88acf2_b.jpgDSCN7687 by axmea?, on Flickr[/IMG]

CF on CF.....

[IMG]https://farm4.staticflickr.com/3951/...819c8e9d_b.jpgDSCN7688 by axmea?, on Flickr[/IMG]

Blacked out the supplied bolt......

[IMG]https://farm6.staticflickr.com/5601/...2f8fef0f_b.jpgDSCN7691 by axmea?, on Flickr[/IMG]

Fitment was spot on.......

[IMG]https://farm6.staticflickr.com/5615/...024d0b2e_b.jpgDSCN7692 by axmea?, on Flickr[/IMG]

Another angle.......

[IMG]https://farm4.staticflickr.com/3936/...12dbcb22_b.jpgDSCN7696 by axmea?, on Flickr[/IMG]

Looks GREAT! Raf :tup:

Looking good! :tup:

Love the carbon! Hehe