Nissan 370Z Forum
Page 22 of 56 « First 122021 22 232432 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Member's 370Z Gallery (http://www.the370z.com/members-370z-gallery/)
-   -   theDreamer's Z (http://www.the370z.com/members-370z-gallery/4602-thedreamers-z.html)

Sibze 07-12-2010 01:11 PM
Can't wait to hear how you like it. I know you'll like it but how much? Lol

theDreamer 07-12-2010 01:52 PM
Quote:
Originally Posted by JB-370z (Post 619058)
So who else is getting a GTM supercharger on the 370z at the moment? I know there have been some G37 folks. Will your HKS Camp 2 been in for the SC install?
HKS Camp 2 should arrive Tuesday or Wednesday so it should be in on time to install.

Quote:
Originally Posted by Zat_Zuma (Post 619070)
Hope somewhere in the testing process you might consider using some aftermarket HFC's IF the LTH's don't work out. :tiphat:
Quote:
Originally Posted by JB-370z (Post 619078)
Yeah he can buy mine so I can get some 3" down pipes :tup:
Depending on what happens we might do this, if the LTH do not work on right now HFC I know will work and we might do this. First thing is first though, have to test the LTH. :D

JB-370z 07-12-2010 02:39 PM
Yup, find that out before we start over nighting parts :)
What sensors are you getting again??? I think you got the harness with this order. HKS told me 350z's did not need the harness but it was not tested on the 370z yet. On my end everything works great without the harness. By adding it I wnder if there are more viewable stock sensors with the harness attached. I guess we will find out, only a $35 part no biggy. I might find the time to solder the wires directly to the stock wires. This way I can have my OBDll port open at all times, along with a cleaner look and install.

On another note did you get pricing from that shop that does the custom screen. What screen are you going to use. I dont want to use a Alpine while I have a Pioneer head unit, that would look tacky. Pioneer currently does not have a screen for sale but they have an older model we could try to source somewhere. This older model matches our Pioneer unit perfectly. Here is a link, maybe you can help me source one. I am sure we can find one if we both try.

Here is the link: Pioneer USA - AVD-W7900 - Rear Seat Viewing Enjoyment for Friends and Family

It has a glossy bezel that matches our unit.

Edit: Also it has a small speaker in the back of the unit. This would be great for the alarm feture of the HKS Camp2 that warns you when you hit a critical setting.

theDreamer 07-12-2010 02:45 PM
Waiting on info on that shop, when I get that I will give them a call and see what they suggest. They might have some of those sitting around that they never sold, but who knows.
Not 100% sure what sensors were ordered, of course boost, but not sure on the other one (maybe A/F?).

JB-370z 07-12-2010 02:56 PM
Quote:
Originally Posted by theDreamer (Post 619477)
Waiting on info on that shop, when I get that I will give them a call and see what they suggest. They might have some of those sitting around that they never sold, but who knows.
Not 100% sure what sensors were ordered, of course boost, but not sure on the other one (maybe A/F?).
I know you did not get a A/F sensor because you need the AFK to get this on the Camp2 unless you had them order the AFK-2 as well. I should have kept my old AFK-1 even though it was big silver and ugly.

I think our only hope for getting the pioneer screen is to find it our self on the net. I will order one as soon as I find one. This shop can do it with any screen. The do a nice little trick with welding plastic.

theDreamer 07-12-2010 04:30 PM
A quick list of everything going in the car for anyone wondering:

-HKS Camp 2
-GTM Oil Cooler
-Rotrex C38 supercharger
-GTM compressor housing
-GTM Supercharger Billet aluminum brackets
-GTM billet aluminum Sc pulley
-GTM supercharger cooler kit
-Rotrex Supercharger Traction fluid
-4-Ply High Resistance Nomex Silicon couplers
-Stainless Steel T-Bolt clamps
-2.5 x 10 x 24 Bar and Plate Core Intercooler Rated @ 700hp
-Polished aluminum IC Piping
-GTM oil Filter Relocation Kit
-Cold Air Intake System (using k&n filters)
-Bosch Bypass valve
-Pre-made steel braided oil and P.S Supply & Return lines
-All Necessary Hardware and Installation Instructions
-GTM Custom mapped plug-in And play engine management for optimum engine tune and power .
-GTM Basic fuel system with Denso 600cc Injectors and - Walbro 255 Fuel Pump .
-GTM Custom Drive belt By Bando
-GTM Heavy duty Belt idlers

JB-370z 07-12-2010 04:57 PM
Dont forget HKS spark plugs.

Zat_Zuma 07-13-2010 07:55 AM
Quote:
Originally Posted by JB-370z (Post 619466)
Yup, find that out before we start over nighting parts :)
What sensors are you getting again??? I think you got the harness with this order. HKS told me 350z's did not need the harness but it was not tested on the 370z yet. On my end everything works great without the harness. By adding it I wnder if there are more viewable stock sensors with the harness attached. I guess we will find out, only a $35 part no biggy. I might find the time to solder the wires directly to the stock wires. This way I can have my OBDll port open at all times, along with a cleaner look and install.

On another note did you get pricing from that shop that does the custom screen. What screen are you going to use. I dont want to use a Alpine while I have a Pioneer head unit, that would look tacky. Pioneer currently does not have a screen for sale but they have an older model we could try to source somewhere. This older model matches our Pioneer unit perfectly. Here is a link, maybe you can help me source one. I am sure we can find one if we both try.

Here is the link: Pioneer USA - AVD-W7900 - Rear Seat Viewing Enjoyment for Friends and Family

It has a glossy bezel that matches our unit.

Edit: Also it has a small speaker in the back of the unit. This would be great for the alarm feture of the HKS Camp2 that warns you when you hit a critical setting.
It would be nice if one could retrofit that screen into the center cluster lid location and just have it for HKS Camp 2 system.

theDreamer 07-13-2010 07:57 AM
Quote:
Originally Posted by Zat_Zuma (Post 620827)
It would be nice if one could retrofit that screen into the center cluster lid location and just have it for HKS Camp 2 system.
Just you wait. ;)

Zat_Zuma 07-13-2010 07:58 AM
Wait? ...... I wanna know now :pics:

theDreamer 07-13-2010 08:00 AM
Still finalizing a few details with a screen, HKS Camp 2, etc. Should know more by the end of the week hopefully, if not sooner.

Zat_Zuma 07-13-2010 08:05 AM
Quote:
Originally Posted by theDreamer (Post 620834)
Still finalizing a few details with a screen, HKS Camp 2, etc. Should know more by the end of the week hopefully, if not sooner.
Let me know as I'm trying to decide on either installing DEFi gauges or just say frig it and look into stereo upgrades and the camp 2 system.

I would prefer to have the screen in the cluster lid location because line of sight but haven't really researched it, to have a final decision.

Any info you could share would help me in my final choice.

theDreamer 07-13-2010 08:13 AM
I can give you sort of an idea of what might happen, this is Project Mothra from this past weekend. They have a Alpine headunit with an Alpine screen in the cubby. JB and I both have Pioneer Z110 headunits, and are hoping to find a Pioneer screen to match.

http://lh5.ggpht.com/_wgFNZZBDMaE/TD...2015.01.14.jpg

Zat_Zuma 07-13-2010 08:27 AM
Me likey

I"m assuming it's a custom fit and the template is not available in the retail market yet?

theDreamer 07-13-2010 08:28 AM
Quote:
Originally Posted by Zat_Zuma (Post 620854)
Me likey

I"m assuming it's a custom fit and the template is not available in the retail market yet?
I am sure a template could be made, but it all depends on what screen you use (that is an Alpine), how you want the screen positioned, etc.


All times are GMT -5. The time now is 01:00 PM.
Page 22 of 56 « First 122021 22 232432 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2