I like that black housing, need to do mine like that

Sent from my LG-H918 using Tapatalk

the matte black goes really well with a dark car. I personally think gloss black blends too much with the car. Went really modest with only the CF reflector and darker silver shrouds. I've always thought the stock shroud, light grey, was to well, light in color.

all suspension parts are on: stance coils, SPL camber and toe arms, Z1 front control arms...fingers crossed the wheels are only a couple weeks away.

Testing ride height, it looks like Ill need to 1/4-1/2 further in the rear and 1/2 in the front.

https://i.imgur.com/HoYuF6j.jpg

Got my suspension installed yesterday. Did some ride height testing and got about a 1.5” drop on all sides. Looks like I’ll need about another .5” and I’ll be good to go.

Obviously hard to tell since the stock wheels are sunk in.

https://i.imgur.com/jVqxC6V.jpg
https://i.imgur.com/XA8rInV.jpg

Mods are looking like they are going well and the car looks great!

Any CELs after the ART pipe install? I picked some up myself but have been holding off until a tune due to potential CEL. Thanks!

nothing yet...maybe due to how far the O2 sensor attaches from the actual pipe.

Thanks for the info! I may need to jump start the install and feel the powah!

Run a 20mm spacer in the back and 15mm in the front if the tires aren't tucked

Sent from my LG-H918 using Tapatalk

Im just waiting for my wheels to come in. If someone let me borrow spacers until my wheels came in, Id definitely put them on.

Got tint put on today. 40% on the front 20% on the sides, and 5% on the small windows and rear.

https://i.imgur.com/z5qmNfl.jpg
https://i.imgur.com/2xjm2bA.jpg

still just waiting on my wheels...about 13-14 weeks in at this point. Same ol' wait like last time.

Better be some good wheels Sent from my LG-H918 using Tapatalk

Guess we'll see :) Ill say this much. They are very aggressive and similar to the Work CR2P. Talking -3 camber to get them fitting tight on the car.

Paint matched door handles incoming! Just needs a little buffing and polishing, to get out the imperfections.

https://i.imgur.com/NKZDEYE.jpg

One of my favorite mods. :tup: Going to look great mounted.