What are you Teeing off of for your gauge pressure source?

I tapped the front of the intake manifold and have a line running to the BOV. I was thinking of t-ing into that.
I bought a 1/4 x 1/4 x 3/16 T fitting.

That should work. I just wouldn’t recommend teeing off the line that runs to the waste gates if you are running an EBC teed off that line too. I tapped the manifold and ran a dedicated line to the boost gauge.

I thought about doing that but didnt want to pull the manifold off, again. :icon17:

rear of manifold@brake booster connection :tup:

Front where we tapped in the brass fitting.

Madwi's picture dump and crap
 

Don’t think that will work with the Tee he bought. I think that hose is 3/8 or 1/2”.

A lot of people put a manifold in right there for all their needs. Like this:

https://www.on3performance.com/shop/...ibution-block/

I like that.

dang, now I gotta rethink this lol.

That was just a quick search for vacuum blocks. They make better ones so don’t necessarily buy that one. It’s probably a waste now that you’ve tapped for the BOV. Would of been a good solution at the beginning. Unless you have future needs for pressure source, I wouldn’t bother.

I actually havent cut the line yet. :tup: I am searching google now for the blocks.

The company Sasha gets the FMICs from has a pretty good one. Just can’t think of the company name at the moment.

Just went through this whole build. VERY nice! We will need to meet up next summer.

I agree! I cant wait to see that beast of a build you got in the shop! :driving:

CJ motorsports Motor mounts came in today. Will order poly trans mount in near. Who know when they will go in as I dont want to rip everything apart now that it is almost put back together. :icon17:
https://i.imgur.com/dk67zjCl.jpg