Wait...give me your new numbers so I can update the FI thread, my last update has you just below the 1k HP mark.

I'll post dyno sheets (pump gas, race gas and e85) when I get the results since I have never seen one posted with 1k over. Bullitt as I mentioned before I know you built your car for power and over 1k hp but the only dynos I have seen of your car are the recent ones in the spring of 2015 by Z1 at 850ish rwhp and Topspeed of 900rwhp on race gas "your sig says 1000+on pump gas", which wasnt pump gas as you stated you were going for when you knocked on me for running e85. Additionally that was with the new Ecutek tuning software. So all I am saying, I believe you about your car being built for 1k over hp.. I just want to see a dyno sheet. I can buy all the parts in the world for a 2k hp car, but without actually achieving it I wont tell folks I have a 2k hp car. I am sure your looking into new turbos anyways, fast intentions ;)

In addition, nobody knows what parts or mods I am using on my car other than what was posted. But Thanks for the input. Don't let assumptions get the best of you. In addition all aspects and information you have provided is already known and was planned. And yes the quad clutch will be awful to drive lol ;)

Again, not knocking your build just stating everybody has been asking for dynosheets on that build for years but since you got it back from Gamma Motors aka GTM, its been far less than what folks have been told. That's all.

NOW BACK ON TOPIC :)

:owned:

Drop the slam_hammer.

He asked HP not rwhp... Reading comprehension fail!

850rwhp = 1000hp 93 oct
900rwhp = 1035hp 93 oct
982rwhp = 1130hp c16

That is given 15% transmission loss... So yes I have been at 1000hp for some time now and all my numbers are at ambient temps around 100* weather and high humidity... So on a normal 70* day yes my car will be 1000rwhp easy. When my new turbo manifolds come in the numbers will go up again!

We will see what numbers you can pull...

I was 982rwhp and 799ftlbs on race gas in 100* weather... i already posted those numbers but feel free to spread false information about my build when I decided to comment on your thread. I did not diss your build but stated I am looking forward to your progress. Stop being childish and grow up Moses.

My apologies, was not aware of the dyno results last month of the 982 rwhp VP Racing Fuels C16. Only made aware of the ones during the spring. Congrats on the numbers. Also I can read that your signature says "2009 1000hp+ 93oct GTM 4.5L TT 370z"

You mentioned in the post earlier when asked "who will be the first 1000hp" but yet your still making changes to the mods and recently "30 days ago" where able to reach your highest rwhp at 982rwhp. So from October 2010 to August 2015 its been over 1,000 rwhp, 800 ft lb on tq on pump gas but as of July 2015 your new shop states "Its been an early morning at TopSpeed Motorsports. I started well before sunrise to reset the record for the highest horsepower 370Z in the world. Thanks to some VP Racing Fuels C16, Mike Mixon's 370Z made 982rwhp@24psi Calibrated with EcuTek International Ltd."

So Spring 2015 was 850 rwhp with your old tuning software, spring 2015 was 900 rwhp with new ecutek tuning and summer 2015 982rwhp with c16 fuel. Just wondering how you reached 1000rwhp so many years ago with old tuning software and on pumpgas...

So these magazine articles and online posts over the last 5 years stating 1000rwhp/800 ft lb of torque when you didnt have the current tune or have ecutek happened how exactly? I assume that's all incorrect? October 2010 "The results were very impressive and enough to earn Mixon and GTM the title belt for a massive horsepower claim. The peak horsepower was over 1,000 at the wheels with an estimated 800lb-ft of torque!" PASMAG | PERFORMANCE AUTO AND SOUND - Shake Up: Mike Mixon's 2009 Nissan 370Z

The only reason I posted this was simply because you mentioned in your last post I was childish and to grow up. You take it extremely defensive knowing your so close to 1000rwhp and whenever anybody ask for dyno sheets you make it appear as that's an idiotic request.

I am glad to see you were able to get closer to your goal however you need to stop being so defensive towards my build. If I hit over 1k then great, if I blow up my motor then great....but I no where stated I hit 1k rwhp and stated originally its an estimate. If I reach 500rwhp, then I will claim 500 rwhp. If I reach 900 rwhp, I will claim 900 rwhp..

I think most people would agree, that for us to claim 1000+ horsepower, we have to make that power to the wheels. TSM and Mike have set the bar at 982whp Dyno Jet and congratulations are due.

When we selected the turbocharger we made certain we have more than enough airflow to punch through that target. But nothing matters and nobody should care, until we deliver results. Talk is cheap, as the old saying goes.

So rather than talk about what we are doing, we are just going to do it and report back when done. We are navigating in uncharted waters and I am pretty excited about what is to come. Thanks you.

agreed... Back on topic. Looking forward to the testing and hoping to report good news, will also report bad news lol

Again your being childish... I posted my dyno sheets as requested. Unlike you I had to pave the way to make my power and do things that had not been done before.... Meaning I had to wade through unknown territory. The numbers came from GTM for the article along with many of the specs. I did not write the article but was given the opportunity to correct any issues I had with the article. If you have ever had a feature you would know this... But you have never been a cover car so until you have you can think whatever the hell you want.

The car made 1000whp on GTMs dyno on different fuel and at different temps... But yes discount that when making your apples to oranges comparisons... The mods I have made were based on reliability mods and safe guards... But hey paint whatever picture you want... I don't care nor do I have to prove anything. You are following in my shadow and it pisses you off. You got all butt hurt when people called you out for going the similar route that I did (twin turbo and stroker). People called you a copy cat and what did you do? You went on a tirade calling me out and saying I was the one calling you a copy cat... Of which never happened but hey... I'm the one stirring this up according to you. You have ostracized yourself locally with a lot of the people and while many of us respect what your doing including myself you continue this tirade of being an ******* and being aggressive. I simply made two points in your thread:

1: your choice in a quadruple plate clutch is going to be very difficult to drive but hey that's your choice... A triple would have held your power just fine and would made driving much easier!

2: you are running a plastic manifold which has stability issues at higher boost levels that you are going to need to make 1000whp. Hence the reason I went GTR manifold and the reason you called me multiple times on my cell trying to get one. I also stated your probably going to need higher boost levels to make the same power and also e85 as well. You took that as an attack an that is sad... This doesn't not speak badly of your build but is a observation based on all the finished builds from the forum... The highest boost level on a stock intake is around 24psi at the moment. So if you bypass that then your in uncharted Territory. I applaud you for doing that and paving the way.

You see I was being nice... Yet you are turning this into a flame war and a stupid ******* circus! You strive off of drama! So get back on topic and stop focusing on my build since you don't even know the facts... Stop spreading false information until you have the facts. /end rant

I will watch and we shall see what you make. I know how much it's going to take to get to these levels and I am waiting to see how you approach the problems I faced in breaking through many of the barriers you will have to face... Good luck!

Sharif,

I look forward to your results!

Mike thanks for the input but much of the information you listed above is incorrect and obviously you are not aware of which mods I am running or my goals for the car. Regardless to say, I am fully aware of both steps you mentioned. You failed to follow up with a simple question "So how do you expect to resolve this issue?" Had you asked, you would realized we have a solution for that.

Again, I appreciate your input but we have already discussed the situation and came with a resolution for the issues you keep bringing up. NOt sure why you had to repeat it twice in the same thread. We didnt jump into this build blindly. 6 months of discussions and ideas. So please stop assuming we have not factored all aspects of my own build.

again, I have not called you any names or etc. All i did was discuss your build and your dyno results. You have called me an Azzwhole, childish, to grow up, aggressive and etc..I have voice recordings from individuals with you speaking negativitely about me. When did I once bring your personal behavior or others opinions about you into this thread? All I simply said is post a dyno sheet for what your own damn SIGNATURE SAYS " Shop Cars: 2013 318whp Nismo VspecII 370z, 2009 1000hp+ 93oct GTM 4.5L TT 370z"

I am simply going off the information you are posting in your own thread. Any information I have stated is based on such information and taking what you have posted as fact. I have only stated what you posted as fact. If the information is wrong then you need to adjust your post. If you are not running a quadruple plate then fix your post. If you are not running a stock intake manifold then fix your post. Simple as that...

Again, you really should just leave this thread. Your negatively impacting your own image. My original post which does not even state any information about a stock manifold, pay attention to the second to the last sentence, "quoted from POST #1" states:

The new mods for 2015 are as follows:

-Fast Intentions Stage 3 Twin Turbo Kit TiAL HTZ-3579 (Billet Wheel) ALPHA Cover (rated for 1,350 rwhp)
-Brian Crower 4.0L Stoker Kit Billet Crank, 92 mm stroke
-PRO H rods w/ 625+ fasteners, JE pistons w/ 9310 pins, rings and locks and fully balanced
-Balance Crank, Pin, Deck, Bore Hone, soda blast
-ARP Main Stud Kit
-ARP L19 Head Stud Kit
-Head Job
-Powder coating parts of course
-Polyurethane Mounts
-MotorDyne TDX 3 inch Full Exhaust System
-3" down pipes (SS) w/recirculating wastegate tubes.
-E85 setup with upgraded fuel pumps and injectors
-Flex Fuel
-TiAL V-band .86 exhaust housings
-ECUTEK Software Tuning
-CSC elimination kit
-CSF Triple By-Pass Radiator
-OS Giken R4C 215mm Quad Plate Clutch Kit
-ID 1700 injectors
-Differential Adjustments are being made 
-Wilwood Forged Narrow Superlite 6R Big Brake 6-piston F. BBK and 4-Piston R.
-Air Lift Performance Digital Air Ride Kit with Air Struts and Autopilot V2 management system with dual viar 325 chrome compressors
-RECARO Sportster Carbon Fiber CS Sport Seats
-Carbon Signal Digital Gauge display.
-Shaved Engine Bay
-Pearl Line

-Fuel System is being worked on along with pumps… More information later

Several other components have been left off list until closer to completion



***So Mike I appreciate your input but I dont appreciate the name calling and etc. We will see what she does. if she blows up, Ill be sure to post videos on here of it. If it does less HP, ill be sure to post them up..... If a hamster comes out of the exhaust pipe, well thats going up on YOUTUBE lol Just please understand all the issues you keep bringing up have already been discussed with Fast Intentions,Forged Performance and other sources as well. We reviewed all possible factors and discussed so many options. Have Faith!!!!

I think you guys should settle this on the track;)

Two bad azz Z's...but let see who has the better build:stirthepot:

I'll be at wannagofast In september for the half mile runs. Plans are racing my buddies alpha 9 gtr. So I'll be there. Hope to see you there too Mike.

Should be fun but mainly testing out the Z against some good competition. Whether I win or lose, I'll have a smile on my face. Those GTR'S are no joke. AWD is one mod I want so badly

So your not running a stock intake manifold? Awesome! are you having a custom sheet metal one made or is Charles going to release his unicorn one (which everyone has begged him to release) to you? I take it your going to go with a short runner style since your keeping your lower intake manifold as your pictures imply.

How about fueling? What twin pump setup are you going to use? I assume your going CJM twin pump and an e85 setup since your going to run ID 1700's.

The manifold information will be released later. Fuel system as well. Some of the information isn't being released at the moment because of testing stage.

Uh oh, I think we have a challenge! What do you say Bullit?

TSM vs. Forged? Or better yet GTM vs. FI

Who's the real king of the 370Z?:tup:

The event is sold out...

siiiigh. TIL that no matter how incredible your numbers are, no matter how gorgeous your car is, there will always be someone to try and bring it down :( Just enjoy this masterpiece of art gentlemen.

Yep event sold out in 20 mins. I'll post video of the runs. Hoping for a good roll run and from a dig.

i'll be there... just to watch :D
i was there at the earlier one and it wasn't that impressive, just a bunch of mustangs and corvettes. but they say the one in september is when the better cars come out

Cant wait to see this thing in action. Your gonna need some sticky rubber!

Yea September event is much more popular than May. Atleast that's how it was last year.

Terribleone you already know it lol. Trying to decide on wheels to use. Maybe 350z track wheels. I believe those are the lightest out of the Z33-Z34 wheels. But will cross that bridge once the car is complete.

yeah that's what i heard as well.

i wonder if solo motorsports will have their 1300+ whp audi ready to go

First time I've seen the Wilwood Disc Brakes Big Brake Kit up close with the Niche Road Wheels 3-piece wheels on the car. Ignore the two missing lugs temporary install.

http://i1110.photobucket.com/albums/...psvs4du1ao.jpg

370z Fast Intentions Stage 3 Turbos & AMS Performance Alpha 12 GT-R Turbos .... Can you figure out which one is for the 370z? ;) small hint, mine have alpha covers ;)

http://i1110.photobucket.com/albums/...pslb8sw6y7.jpg
http://i1110.photobucket.com/albums/...pswmexn3lt.jpg

Beautiful set of turbos!
cant wait to see the runs with this Z!

Both?

well then, can't wait to see the results of this !

First half of powdercoating came back :) Satin Black Timing Chain cover & Mounts

http://i1110.photobucket.com/albums/...psz3fsgqsz.jpg

This is going to be sick and i am looking forward to it running against a few gtrs in the coming weeks!

Thanks Bud :tiphat:

Monster of a car!

Wow
YzGyz

Few pictures of the internals before assembly :)

Forged Performance getting the Brian Crower Stroker Kit assembled.

http://i1110.photobucket.com/albums/...psxod34ybw.jpg
http://i1110.photobucket.com/albums/...psqigyjptb.jpg
http://i1110.photobucket.com/albums/...pstzif0knn.jpg
http://i1110.photobucket.com/albums/...psjopvjw6z.jpg
http://i1110.photobucket.com/albums/...ps1ilvj5h2.jpg

Oh crap! I got sticky stuff in my shorts now. :leghump:

The 4.0L assembled with precision and dedication, best combination in terms of service. Modified Piston oil jets to retain backside piston cooling and lubrication. Forged Performance has yet to disappoint with the build. Thanks again FP crew.

http://i1110.photobucket.com/albums/...pscg2kmggd.jpg

history in making

This is going to be one mighty Z. Sub'd!!!!