Originally Posted by alcheng (Post 2082219)

Mr.kenchan :hello:

thanks for the words... :icon17:

It's been a busy day with lots of customers.... each sales took longer than expected but they all bought something at the end so it's :happydance:

Gonna contact the shop again regarding the sway bars. Most likely will go for Stillen.

Then will have to start saving up for the BBK :tup:

To see my plan for the Z for 2013 ==> alcheng is here..!!! :icon17::icon17:


I gave up shopping on the Gaming chair last night.... saying I might change my mind if I found something good deal....

Ha... I found one.... $200 with the seat...

http://i.ebayimg.com/00/s/NDc4WDY0MA...g!g~~48_35.JPG


gonna go there take a look these couple days... wish me luck.. LOL :icon17:

Originally Posted by alcheng (Post 2082223)

They come in as one-piece... and will become 3-pieces... at nobody's will.... :icon14:

:icon18::icon18:

Originally Posted by kenchan (Post 2082225)

yah, 3pcs wheels appear to be very tricky to manufacture. i would let the real wheel manufacturers handle those. :) they are much heavier than one piece wheels though, and a biotch to clean. my G35C runs 3pc SSR's and without a blower i can't get the water out of the channel between the spoke and barrel pieces. :ugh2: it's worth the hassle if you're into :yum: wheels. :D

on my Z i prefer one piece light weight wheels. :)

Originally Posted by happytheman (Post 2082228)

I'm not going to give them another thought! Why waste my time and hard-earned dollar?:ugh2:

Originally Posted by alcheng (Post 2082219)

I gave up shopping on the Gaming chair last night.... saying I might change my mind if I found something good deal....

Ha... I found one.... $200 with the seat...

http://i.ebayimg.com/00/s/NDc4WDY0MA...g!g~~48_35.JPG
:

Originally Posted by alcheng (Post 2082231)

Thus I like the 5-Spokes since it's easy to clean and light... :icon17:

Originally Posted by kenchan (Post 2082233)

yah, the stock 19's are nice already. id get 15mm stud replacement type spacers for front and bolt-on type for rear and just call it a day. :tup:

Originally Posted by happytheman (Post 2082226)

My super sneaky mine-locating dolphin at work:

Originally Posted by kenchan (Post 2082233)

yah, the stock 19's are nice already. id get 15mm stud replacement type spacers for front and bolt-on type for rear and just call it a day. :tup:

Originally Posted by kenchan (Post 2082230)

mr.alcheng - :tup: on the big sales. and that chair look cool. :tup:
hope you get that stillen soon. are you going to get the adjustable endlinks as well? :) it's great to have extra robustness as the heim joints start to rattle if you use high torsion on stock endlinks...and being able to use the intermediate set-ups is great.



:icon18: true true

Originally Posted by happytheman (Post 2082234)

Nice chair! You're not likely to fall out when you hit those banked turns! :bowrofl:

Originally Posted by kenchan (Post 2082235)

very sharp! :tup: looks great, mr.alcheng!

Originally Posted by JARblue (Post 2082240)

Can I ask why you would get stud replace type in front and bolt-on in the rear if you're getting the same size spacer? :confused: :tiphat:

Originally Posted by kenchan (Post 2082233)

yah, the stock 19's are nice already. id get 15mm stud replacement type spacers for front and bolt-on type for rear and just call it a day. :tup:

Originally Posted by JARblue (Post 2082240)

Can I ask why you would get stud replace type in front and bolt-on in the rear if you're getting the same size spacer? :confused: :tiphat:

Originally Posted by happytheman (Post 2082245)

That's actually a really good question. I prefer the stud replacement type for safety reasons.

Originally Posted by Nismo89 (Post 2082229)

uh oh lol brothers gf is pleading with me , trying to get me to go out to a party with them tonight since " last time we all did, we had so much fun, you were hammered" lol

Originally Posted by onzedge (Post 2082263)

We are off to an early dinner:

Shady Lady Bar ~ Sacramento