Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   The Lounge (Off Topic) (http://www.the370z.com/lounge-off-topic/)
-   -   The New “What did you do with your Z today” (with off topic replies) XXXIV (http://www.the370z.com/lounge-off-topic/132114-new-what-did-you-do-your-z-today-off-topic-replies-xxxiv.html)

JLarson 01-23-2020 12:18 PM

Quote:

Originally Posted by BettyZ (Post 3903056)
Floss is what Rusty uses for his thongs.

Try not to salivate when you type that. It'll ruin your keyboard.

sx moneypit 01-23-2020 01:20 PM

:icon18:

SouthArk370Z 01-23-2020 01:46 PM

Quote:

Originally Posted by Ghostvette (Post 3903028)
I found it interesting that in an earlier post, he said he wasn't going to lock the thread and then he does, after being called out as a liar. Trips needs to boot him and Bobby from the forum. :mad:

I'm not saying he was right to lock the thread, but he did let quite a few people opine on the subject before doing so.

I can't tell who's right/wrong (the thread had already gotten much too long and repetitive by the time I read it), so I don't know if booting is called for, but it certainly seems like the owner of the site needs to at least re-examine their official relationship.

Rusty 01-23-2020 01:52 PM

Quote:

Originally Posted by JLarson (Post 3903004)
You're more than welcome to come hang out!

Just might do that. :D

Rusty 01-23-2020 01:54 PM

Quote:

Originally Posted by jwick (Post 3903008)
I’m a huge fan of the water pick

Quote:

Originally Posted by JARblue (Post 3903011)
Water pick is good for your gums and not much else. It's a good supplement to your teeth cleaning routine, but stick to traditional flossing :twocents:

It's great for getting under my bridges. :tup:

Rusty 01-23-2020 01:57 PM

Quote:

Originally Posted by Ghostvette (Post 3903028)
I found it interesting that in an earlier post, he said he wasn't going to lock the thread and then he does, after being called out as a liar. Trips needs to boot him and Bobby from the forum. :mad:

Bobby is no longer a paid vendor. Guess he didn't think it was worth it here. No one here loves him anyway. :rofl2:

Rusty 01-23-2020 01:58 PM

Quote:

Originally Posted by Spooler (Post 3903032)
Thong Rusty..... LMAO Classic tags....

I seen that. Bet it was you who did it. :rofl2:

Spooler 01-23-2020 02:00 PM

Quote:

Originally Posted by SouthArk370Z (Post 3903080)
I'm not saying he was right to lock the thread, but he did let quite a few people opine on the subject before doing so.

I can't tell who's right/wrong (the thread had already gotten much too long and repetitive by the time I read it), so I don't know if booting is called for, but it certainly seems like the owner of the site needs to at least re-examine their official relationship.

When you catch someone in a lie you then start to think, "What else did they lie about". I never trust them again.

Rusty 01-23-2020 02:04 PM

Quote:

Originally Posted by BettyZ (Post 3903056)
Floss is what Rusty uses for his thongs.

Quote:

Originally Posted by JLarson (Post 3903060)
Try not to salivate when you type that. It'll ruin your keyboard.

He just wants to date me in the worse way. :shakes head: But I'm already spoken for. He would have better luck with Spooler I think.

BettyZ 01-23-2020 02:09 PM

Quote:

Originally Posted by Rusty (Post 3903091)
He just wants to date me in the worse way. :shakes head: But I'm already spoken for. He would have better luck with Spooler I think.

Your garage is too small for my tastes :shakes head:

Spooler 01-23-2020 02:14 PM

Quote:

Originally Posted by Rusty (Post 3903091)
He would have better luck with Spooler I think.

Not happening. Not a chance in hell.

Rusty 01-23-2020 02:15 PM

Quote:

Originally Posted by BettyZ (Post 3903092)
Your garage is too small for my tastes :shakes head:

It's too small for me too. :shakes head::shakes head: Need a 40x40. Better would be a 100x100.

Rusty 01-23-2020 02:16 PM

Quote:

Originally Posted by Spooler (Post 3903093)
Not happening. Not a chance in hell.

He just wants some of that horse. :nutswinger:

-ZS-Carpenter 01-23-2020 02:17 PM

Quote:

Originally Posted by Rusty (Post 3903094)
It's too small for me too. :shakes head::shakes head: Need a 40x40. Better would be a 100x100.

with 14' ceilings

redondoaveb 01-23-2020 03:02 PM

Quote:

Originally Posted by Rusty (Post 3903084)
Just might do that. :D

You know, "you're more than welcome to come hang out" is code for bring your tools and the beer. :rofl2:

BettyZ 01-23-2020 03:26 PM

Quote:

Originally Posted by Spooler (Post 3903093)
Not happening. Not a chance in hell.

:eek: Spooler!!! I thought we had a real connection going, man.

BettyZ 01-23-2020 03:29 PM

Quote:

Originally Posted by JLarson (Post 3903060)
Try not to salivate when you type that. It'll ruin your keyboard.

Overproduction in the salivary glands is a real medical issue, duuuuuuude.

Falconquey 01-23-2020 03:45 PM

Quote:

Originally Posted by BettyZ (Post 3903107)
Overproduction in the salivary glands is a real medical issue, duuuuuuude.



Ahhhh... Uuhhh... For some maybe. :ugh2:

503.Zed 01-23-2020 04:11 PM

Just got some Nokian zLine AS tires on today, need some all seasons to hold me over until I can throw my 4S back on in the spring/summer when the weather is really nice.

eastwest2300 01-23-2020 05:13 PM

Quote:

Originally Posted by BettyZ (Post 3903107)
Overproduction in the salivary glands is a real medical issue, duuuuuuude.

wtf

:mad:

eastwest2300 01-23-2020 05:17 PM

Quote:

Originally Posted by madwi (Post 3903000)
Settling in?

i love it duude.. I got the fricken hookup today on Z parts.. I picked up some nismo chrome pedals today, I was literally in heaven, it was awesome.

Zingston 01-23-2020 05:17 PM

What's good duuuuudes?

What'd I miss? :ugh2:

eastwest2300 01-23-2020 05:19 PM

Quote:

Originally Posted by Zingston (Post 3903125)
What's good duuuuudes?

What'd I miss? :ugh2:

wtf.

:mad:

Rusty 01-23-2020 06:07 PM

Quote:

Originally Posted by Zingston (Post 3903125)
What's good duuuuudes?

What'd I miss? :ugh2:

Just the usually programming.

Where Betty got the hots for Spooler. Spooler not having any of it.

Betty's in love with a tranny, name Jack.

Madwi is going to JL's places to install a flux capacitor. :driving:

Madwi going to stop at my place in his travels to JL.

JC is having pussy trouble. :nutswinger: :icon23:

EW is having :wtf: moments.

503 got new rubbers. Wonder if he going check for pin holes before he uses them.

ZS wants a garage with 14 ft ceiling. Something about needing the height for his BDSM equipment for his "Garage of Pain" or something like that.:icon14:

Falcon is worry about Betty having overproduction in the salivary glands. Thinks he drools on himself a LOT. :drool:

Zingston 01-23-2020 06:10 PM

Oh. Sounds like a typical Thursday on the forum. LOL! :icon14: :rofl2:

Rusty 01-23-2020 06:14 PM

Quote:

Originally Posted by Zingston (Post 3903135)
Oh. Sounds like a typical Thursday on the forum. LOL! :icon14: :rofl2:

You got it. Like any other day in this thread. Same boring chit. :shakes head:

eastwest2300 01-23-2020 06:16 PM

Quote:

Originally Posted by Rusty (Post 3903133)
Just the usually programming.

Where Betty got the hots for Spooler. Spooler not having any of it.

Betty's in love with a tranny, name Jack.

Madwi is going to JL's places to install a flux capacitor. :driving:

Madwi going to stop at my place in his travels to JL.

JC is having pussy trouble. :nutswinger: :icon23:

EW is having :wtf: moments.

503 got new rubbers. Wonder if he going check for pin holes before he uses them.

ZS wants a garage with 14 ft ceiling. Something about needing the height for his BDSM equipment for his "Garage of Pain" or something like that.:icon14:

Falcon is worry about Betty having overproduction in the salivary glands. Thinks he drools on himself a LOT. :drool:

:icon14::icon14::icon14::icon14:

eastwest2300 01-23-2020 06:18 PM

Quote:

Originally Posted by Zingston (Post 3903135)
Oh. Sounds like a typical Thursday on the forum. LOL! :icon14: :rofl2:

:icon14:

-ZS-Carpenter 01-23-2020 06:30 PM

Quote:

Originally Posted by Rusty (Post 3903133)
Just the usually programming.

Where Betty got the hots for Spooler. Spooler not having any of it.

Betty's in love with a tranny, name Jack.

Madwi is going to JL's places to install a flux capacitor. :driving:

Madwi going to stop at my place in his travels to JL.

JC is having pussy trouble. :nutswinger: :icon23:

EW is having :wtf: moments.

503 got new rubbers. Wonder if he going check for pin holes before he uses them.

ZS wants a garage with 14 ft ceiling. Something about needing the height for his BDSM equipment for his "Garage of Pain" or something like that.:icon14:

Falcon is worry about Betty having overproduction in the salivary glands. Thinks he drools on himself a LOT. :drool:

:bowrofl:

JLarson 01-23-2020 06:56 PM

Quote:

Originally Posted by redondoaveb (Post 3903102)
You know, "you're more than welcome to come hang out" is code for bring your tools and the beer. :rofl2:

Lol, if rusty offers to visit, i supply the beer. He's not the guy who stands around watching.

Rusty 01-23-2020 07:10 PM

Quote:

Originally Posted by JLarson (Post 3903147)
Lol, if rusty offers to visit, i supply the beer. He's not the guy who stands around watching.

When is this love-fest?

Spooler 01-23-2020 07:54 PM

I am so dang frustrated with my car it is not funny. Years ago I stopped letting folks work on my car because of it. I can't post this in my thread but I can say I am just a little pissed off here. WTF, really. Oh, we have never had a headgasket issue. I just blew that out of the water. It is going to be expensive if I let someone else get it right. 20k expensive. Ya want to know why I am considering a comeback tour? To save money and just do it my dang self. I can do just as good or better work than most. I can't fab stuff up that great and that is fine. I don't need too. Freaking bullchit.

eastwest2300 01-23-2020 08:17 PM

Quote:

Originally Posted by Spooler (Post 3903158)
I am so dang frustrated with my car it is not funny. Years ago I stopped letting folks work on my car because of it. I can't post this in my thread but I can say I am just a little pissed off here. WTF, really. Oh, we have never had a headgasket issue. I just blew that out of the water. It is going to be expensive if I let someone else get it right. 20k expensive. Ya want to know why I am considering a comeback tour? To save money and just do it my dang self. I can do just as good or better work than most. I can't fab stuff up that great and that is fine. I don't need too. Freaking bullchit.

be strong duude...:iagree:

i wont tell you to "suck it up duude"

:ugh:

eastwest2300 01-23-2020 08:18 PM

Quote:

Originally Posted by Rusty (Post 3903151)
When is this love-fest?

i aint coming duude..

:ugh:

Spooler 01-23-2020 08:36 PM

Quote:

Originally Posted by eastwest2300 (Post 3903162)
be strong duude...:iagree:

i wont tell you to "suck it up duude"

:ugh:

Yeah, I will be strong. I will do it myself.

abm89 01-23-2020 09:10 PM

I think at this point I am just waiting for closing. I really would like to get all of this done so I can replace the O2 sensors.

I also bought a car corral ticket for the GT World Championship at COTA (so I don't have to park with the plebs. Idgaf about parade laps)

Rusty 01-23-2020 09:15 PM

Quote:

Originally Posted by Spooler (Post 3903158)
I am so dang frustrated with my car it is not funny. Years ago I stopped letting folks work on my car because of it. I can't post this in my thread but I can say I am just a little pissed off here. WTF, really. Oh, we have never had a headgasket issue. I just blew that out of the water. It is going to be expensive if I let someone else get it right. 20k expensive. Ya want to know why I am considering a comeback tour? To save money and just do it my dang self. I can do just as good or better work than most. I can't fab stuff up that great and that is fine. I don't need too. Freaking bullchit.

Your feelings are totally understandable.

jchammond 01-23-2020 09:25 PM

Quote:

Originally Posted by jwick (Post 3903035)
Completely agree. Water pick is not a substitute for flossing. It just removes the large particles so you can effectively floss and not worry about removing all the food.

Doc said it helps cleaning underneath those 2 bottom implants; as I’ll be flossing as well & brushing & mouthwashing...lol...more maintenance :ugh2:

jchammond 01-23-2020 09:26 PM

Home eating up another plate of lasagna & eyeballing a cake simultaneously :tup:

Spooler 01-23-2020 09:41 PM

Quote:

Originally Posted by Rusty (Post 3903175)
Your feelings are totally understandable.

I am giving them the opportunity to make it right. If they do the labor for free I will be good with it. If not, I am doing it myself. Please don't post about this in my main thread. I don't need the BS that would come with it.


All times are GMT -5. The time now is 04:44 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2