exhaust tips
 

Hi all! I've searched Google for 4 days trying to find these and I just cant. I am wanting to find 2 each resonated 2.5" inlet 5 -or- 6 inch outlet exhaust tips. Right now the largest I can find s 4" out and I just don't think that will look right.

Want weld on version and brand at this point don't matter but id prefer SS and slant cut.

Or give me idea I haven't though of. I'm building a cbe and I have all the parts picked except for the tips.

But any and all help would be greatly greatly appreciated

Why would you want a 6 inch exhaust tips.

I'm fairly sure they don't make any that reduce that far down, you're probably gonna have to get a 4" to 2.5" reducer pipe, and weld that to a 4" inlet/5"outlet pipe....

I cant find any 6" exhaust tips that aren't for trucks.... and they have a 12" length.

The stock tips on my nismo are just over 5" unless I just measured wrong, it was dark. So really I'm just trying to match the 5's that are on there. 4" I held up to current and it looked like a baby. But may have to just get 4" I can find them all day long

They are definitely under 5". Leave the 5-6" tips for the diesel guys.

I think the largest that i have seen someone make the tips for that are the guys at Meisterschaft. They make a 130mm tip (5.11 in) which is the same tip that they use on the GTR. I have had a couple guys on here buy that system for their Nismo, and the 5" actually looks really good.

You can buy some tips from Motordyne that are 5".

Photo courtesy of Boost Lee. 5" titanium rolled tips.
http://img.photobucket.com/albums/v2...3/IMG_1172.jpg

Meisterschaft Nismo axleback

http://img.tapatalk.com/d/14/06/03/vameny3e.jpg

Like I said it was dark :)

And thank the rest of you for the info

Yup, you can get GTR tips from AAM. I have a pair of their GTR ti tips from my old exhaust. They show some use but shot me a PM if you are interested.

not enough hello kitty in this thread

https://encrypted-tbn2.gstatic.com/i...0uDrUD-gQ1roUg

stock OD on them is 4-3/4, so 5 would be the max I'd be looking for

Motordyne also has SS tips that are 4.5". May be more to your liking. Here are some comparison shots.

http://img.photobucket.com/albums/v2...3/IMG_1029.jpg

http://img.photobucket.com/albums/v2...3/IMG_1130.jpg
http://img.photobucket.com/albums/v2...3/IMG_1126.jpg

FringeXVO makes weld on and slip on tips too.... 5.25"

http://img.tapatalk.com/d/14/06/10/eme2aqet.jpg

http://img.tapatalk.com/d/14/06/14/eguzyper.jpg

Thank you speedfreek and wheee! for the info.

Shifting gears a bit I'm finding 3" inlets are easy to find...but I seem to remember reading going over 2.5" dual cbe actually makes you lose power except in turbo/supercharder applications. Can anyone confirm this?

I know I'm never going to boost; so is 3" dual with x pipe a good or bad pursuit?

Right now I have pricing on flanges, flex pipes, 12 & 18 inch resonators, mufflers and with new info a couple options for tips. Shop quotes range from $250 to $450 for them to fab it out of stainless steel.

A cursory research shows bumping all the items to 3" wouldn't raise the material cost by much and in some parts save money.

At the end of the day I want power so that's what my focus is on. With the contacts I have I can save a substantial enough amount to go custom rather than purchasing one that is fab'd by invidia, hks, etc

Hello,does anyone know where I can buy 5 inch burnt and rolled tips?? I want something identical if not close. I'm looking for a 3" I let and 5" out. Thanks.

These don't have a burnt finish, but they have a rolled edge - http://www.summitracing.com/parts/sum-690038/overview/

Motordyne?

MXP doesn't have a rolled titanium tip, just a straight cut. Motordyne has 5" blue straight cut in stock. Waiting on the rolled 5" burnt to come in but they are just being held up with all the Port troubles.

PM me if you want a price but they're somewhere in the $120 range.

so B2 Auto Designs has the Motordyne 5 inch rolled Titanium tips for $248! WOW!! Is it worth it???? I have searched high and low and I cannot find an identical one for a lot less, e-Bay had 4.5 inch tips which are rolled and burnt but I really want 5 inch ones. what is the stock exhaust pipe diameter,2.5?

Need to go with 4' exhaust tips, they will scrap a bit though.

http://www.strangecosmos.com/images/content/120495.jpg

Figures Whee would have tips that look like a jet fighter's exhaust.