Stillen Gen 3
 

Hey guys, i got a 2014 370z and i just put in the intake system today, but the filters won't fit that i got. I bought a used kit from a g37. Will the filters Ru-2820 work for my car and tuck in neatly? also are those filters only for the NISMO?

The Stillen Gen 3 intakes state specifically they were designed for the Z only.

I don't know if thats leading to your install issue, But the filter part # is correct.

They do also offer a dry filter.

Rajmangal7, I installed my G3s on my NISMO about a month ago. Install was pretty straight forward. I used the "sticky" G3 install thread and YouTube videos for the install. I can confirm that your G3 install is possible. The NISMO install is a little different, but no so different that you shouldn't be able to figure it out. Filter placement and how you cut your holes to get the proper angle is key. When installing the crossbar (3 bolt bar across the radiator) you may have to lightly press down to get the bolts in, just so long as you don't deform your filter. If you have your filters pressed in far enough, you should be able to bolt it back on with no issues.

Somewhere around the forums I saw a NISMO G3 DYI install thread...

Good luck, hope this helps.

War Eagle!

I think the problem is you got a used g37 version... I believe they are different than the 370z ones.