Nissan 370Z Forum
Page 3 of 8 12 3 45 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   NoGood Review | R2C Performance Intake Install (http://www.the370z.com/intake-exhaust/8195-nogood-review-r2c-performance-intake-install.html)

Pushing_Tin 08-21-2009 12:44 AM
Is there a way to reset the ECU other than pulling off the battery cable?

Pushing_Tin 08-21-2009 12:46 AM
Quote:
Originally Posted by Endgame (Post 161638)
Ehhhh.. I don't know about these. How much air will the intake be able to suck in given it seems completely shielded on the sides and underneath?? Also, this intake still appears that it will suck in hot air from the top....

Am I missing something ... again?
Maybe, the dyno runs show a +16hp gain for the G37. I have also ordered a set and and plan to dyno my car before and after. Now I live in the country and work two jobs so I don't know exactly how soon I can get this done, but I hope to have both runs and the installation done within 2-3 weeks.

nogoodname 08-21-2009 12:46 AM
yes there is an ecu reset with disconnecting battery, i will be testing some procedures tomorrow if i can get them to work.

right now it's late

nogoodname 08-21-2009 12:47 AM
Quote:
Originally Posted by Pushing_Tin (Post 161846)
Maybe, the dyno runs show a +16hp gain for the G37. I have also ordered a set and and plan to dyno my car before and after. Now I live in the country and work two jobs so I don't know exactly how soon I can get this done, but I hope to have both runs and the installation done within 2-3 weeks.
hopefully this thread will speed up install time :tiphat:

Pushing_Tin 08-21-2009 12:47 AM
Quote:
Originally Posted by nogoodname (Post 161847)
yes there is, i will be testing some procedures tomorrow if i can get them to work.

right now it's late
Is the G and the Z the same? I haven't bothered to look in the owner's manual if it's there.

Pushing_Tin 08-21-2009 12:49 AM
Quote:
Originally Posted by nogoodname (Post 161851)
hopefully this thread will speed up install time :tiphat:
I will do my best, but they haven't even shipped yet so I won't even get them until the middle of next week.

+rep btw for the review! :tiphat:

nogoodname 08-21-2009 12:49 AM
i'm sure it is the same

nogoodname 08-21-2009 12:50 AM
Quote:
Originally Posted by Pushing_Tin (Post 161855)
I will do my best, but they haven't even shipped yet so I won't even get them until mid week, next week more than likely.

+rep btw for the review! :tiphat:
they ship fast, came to canada from the r2c factory in 5 days

Pushing_Tin 08-21-2009 12:51 AM
Quote:
Originally Posted by nogoodname (Post 161856)
i'm sure it is the same
Is it in the owner's manual? I'm looking right now.

Pushing_Tin 08-21-2009 12:52 AM
Quote:
Originally Posted by nogoodname (Post 161858)
they ship fast, came to canada from the r2c factory in 5 days
LOL, I think you're closer to the factory than I am! :icon17:

nogoodname 08-21-2009 12:57 AM
Quote:
Originally Posted by Pushing_Tin (Post 161861)
Is it in the owner's manual? I'm looking right now.
i think it is....it's somewhere in there for sure.... maybe under air fuel ratio section...

Quote:
Originally Posted by Pushing_Tin (Post 161863)
LOL, I think you're closer to the factory than I am! :icon17:
lol...if the polar bears can deliver it to me that fast, just think how fast it will be for you

Pushing_Tin 08-21-2009 12:59 AM
Quote:
Originally Posted by nogoodname (Post 161873)
i think it is....it's somewhere in there for sure.... maybe under air fuel ratio section...

I don't see it anywhere, maybe somebody else can chime in.

nogoodname 08-21-2009 12:59 AM
check this thread Tin

Easy Way to Reset ECU without battery disconnect - MyG37

nogoodname 08-21-2009 01:01 AM
http://myg37.com/forums/attachments/...rom-manual.jpg

Pushing_Tin 08-21-2009 01:04 AM
Quote:
Originally Posted by nogoodname (Post 161877)
Excellent! This will be very helpful in a week or two. Merci! :tiphat:


All times are GMT -5. The time now is 03:15 PM.
Page 3 of 8 12 3 45 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2