Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Questions Regarding Test Pipes (http://www.the370z.com/intake-exhaust/60970-questions-regarding-test-pipes.html)

Notsud 13 09-24-2012 01:52 PM

Questions Regarding Test Pipes
 
Does it really matter what brand you go with? I mean, they're all pretty similar right? Forgive me if I'm wrong, but I was offered a good deal on Megan test pipes. Thanks in advance.

edub370 09-24-2012 02:08 PM

I would say no (save for ark pipes. if u are just wanting a straight tp, then a pipe is a pipe

Notsud 13 09-24-2012 02:12 PM

thanks for the reply, but whats different about the ark pipes?

Sent from my DROID4 using Tapatalk 2

DEpointfive0 09-24-2012 04:24 PM

You're paying for the resonators honestly, the Arks and the Motordyne Art Test pipes have weird, big arse resonators:

Ark:

http://www.the370z.com/exhaust-intak...flow-cats.html

I have some Megan resonated ones, and they are great... My 2 problems with them is that the O2 bungs are kinda short (I had mine extended and I put stainless steel wool inside them [and you can't extend them that much]), and the flange has one thread, so you use an OEM bolt to tighten that corner of the flange... Use a BIT of threadlocker, or tighten that biotch tight when you do it up

Notsud 13 09-24-2012 04:46 PM

hey thanks for the reply. i can probably have a muffler shop move the p2 bung further and weld the old bung close right?

Sent from my DROID4 using Tapatalk 2

DEpointfive0 09-24-2012 04:52 PM

Quote:

Originally Posted by Notsud 13 (Post 1929941)
hey thanks for the reply. i can probably have a muffler shop move the p2 bung further and weld the old bung close right?

Nope, or they're going to rape you to do so... Megan uses 304 stainless steel, and it is not easily weldable... I think you'll have space to put "J" bung ones from eBay or whatever. My guys welded a 1/2" extension that all muffler shops have lying around in case someone asks for another 02 bung or something like that...

DEpointfive0 09-24-2012 04:53 PM

Oh, and if you do decide to use steel wool, use 304 steel wool or something, you want something that won't rust... If you need some, PM me your name and address and I'll send you some

Kingbaby 09-24-2012 04:54 PM

It's an exhaust system, meaning different parts yield different results!

Test pipes in genereal make the exhaust note louder!

So if you're just adding test pipes to the stock setup then your fine with whatever. After adding those megans test pipes....save for a complete setup cause adding anything else it will start to rasp and sound like a$$...

Notsud 13 09-24-2012 05:14 PM

oh got it...sounds like a lot of work going with megan test pipes. do all of the other test pipes have similar issues? i can get a set of used stillens for 200 picked up.

i have a greddy ti-c catback thatll be installed at the same time.

Sent from my DROID4 using Tapatalk 2

Kingbaby 09-24-2012 05:22 PM

I would recommend you put that on first and drive around see how you like it first.

DEpointfive0 09-24-2012 05:23 PM

Quote:

Originally Posted by Notsud 13 (Post 1929969)
oh got it...sounds like a lot of work going with megan test pipes. do all of the other test pipes have similar issues? i can get a set of used stillens for 200 picked up.

i have a greddy ti-c catback thatll be installed at the same time.

Sent from my DROID4 using Tapatalk 2

WOW, you're going to deafen people, LOL!!!


It's really not a lot of work, I just took extra precautions not to get any CELs...

And I don't think Stillen makes test pipes unless someone is lying to you, or they JUST got released

DEpointfive0 09-24-2012 05:30 PM

Where in CA are you located???

Notsud 13 09-24-2012 05:43 PM

im located near pasadena. i wasn't aware of how loud the Greddy Ti-C with test pipes would be lol...is it really going to be that bad? i got a great deal on the Greddy Ti-C so i picked them up. I wanted to go with the ARK Grips originally.

DEpointfive0 09-24-2012 06:27 PM

Quote:

Originally Posted by Notsud 13 (Post 1930007)
im located near pasadena. i wasn't aware of how loud the Greddy Ti-C with test pipes would be lol...is it really going to be that bad? i got a great deal on the Greddy Ti-C so i picked them up. I wanted to go with the ARK Grips originally.

I assume you bought them from the forum member that was selling it... It was a great deal... But yeah, I think its THE loudest, or close to the loudest exhaust you can buy for the 370Z... I'd frist install that and see how you like it, THEN decide on test pipes or HFC's
The other thing, test pipes smell like DEATH... No more driving with your windows down (or at least when you get to a stop sign, roll them up and click recycle air, LOL)

I have some Berk HFC's for sale if you want to go louder and get a little more HP

Kingbaby 09-24-2012 06:29 PM

The smell goes away guys....seriously, once you tune and break it in...it goes away!

Untuned however is a gas station


All times are GMT -5. The time now is 10:34 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2