Nissan 370Z Forum
Page 255 of 424 « First 155205245253254 255 256257265305355 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Fast Intentions exhaust is here! (continued) (http://www.the370z.com/intake-exhaust/56015-fast-intentions-exhaust-here-continued.html)

steveg78 04-07-2014 10:13 PM
Quote:
Originally Posted by axmea? (Post 2766639)
Do you guys check at the lines that run at 10 - 11 o'clock on the passenger side cans? I cannot tell what that line supplies but it is close to the cans and want to make sure that is safe. I regularly check.
Quote:
Originally Posted by zfanatic19 (Post 2766657)
Are you talking about the fuel line that's next to the muffler on the passenger side? You should have gotten a heat shield cloth to put around it with the exhaust?
Quote:
Originally Posted by wackjum (Post 2767131)
I used the heat shield they provided me but I wanted more coverage so I also wrapped the entire length of exposed hose with the reflective metal tape you use for dryer installations. Been over six months with no issues.
After 3yrs since installing the F.I. exhaust, I still think about what would happen if someone rear-ended me and that fuel line busted...

Jesus1212123 04-07-2014 10:32 PM
Talked to Danny from Fast Intensions this morning and #939 will be ready for me to pick up this Friday!


Sent from my iPhone using Tapatalk

axmea? 04-08-2014 02:08 AM
Quote:
Originally Posted by zfanatic19 (Post 2766657)
Are you talking about the fuel line that's next to the muffler on the passenger side? You should have gotten a heat shield cloth to put around it with the exhaust?
Quote:
Originally Posted by wackjum (Post 2767131)
I used the heat shield they provided me but I wanted more coverage so I also wrapped the entire length of exposed hose with the reflective metal tape you use for dryer installations. Been over six months with no issues.
I knew it was the fuel line after figuring out where it came from. The heat shield they provided is there alright. Tony did the install. It's just too close so I have to check frequently.

Quote:
Originally Posted by steveg78 (Post 2772718)
After 3yrs since installing the F.I. exhaust, I still think about what would happen if someone rear-ended me and that fuel line busted...
No brake checking allowed.

Sh0velMan 04-08-2014 07:51 AM
that's not a fuel line.. it's a vacuum line for the EVAP system.

If you got rear-ended and that line were cut (unlikely) nothing would happen at all except maybe a check engine light.

FPenvy 04-08-2014 07:53 AM
Quote:
Originally Posted by Sh0velMan (Post 2772948)
that's not a fuel line.. it's a vacuum line for the EVAP system.

If you got rear-ended and that line were cut (unlikely) nothing would happen at all except maybe a check engine light.
:owned:

Sh0velMan 04-08-2014 07:55 AM
For reference, I stuck a $5 Vatozone "breather filter" on mine when I deleted my evap system. Maybe I'll take a pic sometime when I'm back there.

FPenvy 04-08-2014 07:56 AM
Quote:
Originally Posted by Sh0velMan (Post 2772953)
For reference, I stuck a $5 Vatozone "breather filter" on mine when I deleted my evap system. Maybe I'll take a pic sometime when I'm back there.
i thought about doing that as well whenever i originally installed my CBE.

Sh0velMan 04-08-2014 08:01 AM
Quote:
Originally Posted by FPenvy (Post 2772956)
i thought about doing that as well whenever i originally installed my CBE.
If you have inspections in your state, I'd leave it alone. Entire system only weighs around 5 or 6 pounds.

Almost wish I'd left mine alone :P

Okay not really, but still.

FPenvy 04-08-2014 08:04 AM
Quote:
Originally Posted by Sh0velMan (Post 2772961)
If you have inspections in your state, I'd leave it alone. Entire system only weighs around 5 or 6 pounds.

Almost wish I'd left mine alone :P

Okay not really, but still.
i'm running straight pipes......does it look like i have a problem passing state inspections? lol :tiphat:

speaking of which......forgot to post that in here in case anyone cares.

http://www.the370z.com/intake-exhaus...s-exhaust.html

Meulen 04-08-2014 08:11 AM
2 Attachment(s)
couple pics for you guys on the fence!

wolfesquire 04-08-2014 12:12 PM
Just placed my order but Tony is out of the office. 14 week build time but I trust you all on how awesome this exhaust is!

axmea? 04-08-2014 03:00 PM
Quote:
Originally Posted by Sh0velMan (Post 2772948)
that's not a fuel line.. it's a vacuum line for the EVAP system.

If you got rear-ended and that line were cut (unlikely) nothing would happen at all except maybe a check engine light.
Thank you! Now enlightened.

Drew303 04-09-2014 03:38 PM
Just put mine on a few minutes ago!!
http://i24.photobucket.com/albums/c4.../exhaust-1.jpg

Bulldog_z34 04-10-2014 12:52 PM
1 Attachment(s)
6Attachment 86848

Fast Intentions Catback has arrived!! Of course I have to go to work now -_- ! Packaging was amazing I'm so glad I went with CF cans because it looks so crazy I can't to install them and hear them fire up!!!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Drew303 04-10-2014 03:51 PM
To reiterate (sp?) on what everyone else is saying, this exhaust is F*****G AMAZING!!!


All times are GMT -5. The time now is 04:06 AM.
Page 255 of 424 « First 155205245253254 255 256257265305355 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2