It changed. When you call the old number, the message tells you the new number. But the new number is 805-522-3278

Darkpath! How did you jump me I'm #527 no tracking info for me...:( well enjoy. I will be patient.

Lol totally forgot to take pics, I've been a bit distracted with driving it :driving: also today I just put my stillen crank pulley on so that was fun. Took me about two hours cause I've never done it before and I triple checked every step to make sure I didn't mess anything up, and I had to improvise on certain parts for lack of the right tools. Anyways, I'll try to get pics for you tomorrow. All I have is my iPhone to take them though, so I'm not sure how good they'll come out. :tup:


Sent from my iPizzle using magic and new-fangled science stuff

Huck! 2 hours for the pulley??? I don't even think about installing it by myself. Lol! Do u have to angle when installing or something like that?


Sent from my iPhone using Tapatalk

Got mine installed today at P Tuning and a dyno pull. Sounds great but the high heat and humidity sapped my peak power. It's at least 10 degrees hotter and much more humid than last time.

No not really, it's just that I really went slow to make sure I didn't mess anything up. I took my bumper off even though you don't have to. The basic steps are:
1. Take off your radiator reservoir.
2. Take off your radiator fan assembly
3. Use a 3/8 ratchet with an extender on the handle for more leverage on the tensioner
4. Put a pry bar in the oem pulley to keep it from turning
5. Loosen crank pulley bolt and remove pulley
6. Install new one and tighten to 33 ft/lbs.
7. Release tensioner and check that the belt is sitting correctly in all the pulley grooves.
8. Replace radiator fan assembly and fluid reservoir, then bumper.
9. Double check all tubes, hoses, wire connectors etc are reattached
10. Drive it like you stole it.

If anyone has another questions you can pm me. Here's some pics of the exhaust...

http://i62.photobucket.com/albums/h9...t/18051e80.jpg
http://i62.photobucket.com/albums/h9...t/60d8a3fc.jpg
http://i62.photobucket.com/albums/h9...t/f8e3d8ee.jpg
Again all these pics are from my iPhone, sorry for the quality.


Sent from my iPizzle using magic and new-fangled science stuff

Hey Tony,

please reply to my email about ordering, really need this exhaust thanks

You could wait a while for a response, I think he gets a lot of mail.
Best is to call him that way you get the personal Tony service!

:iagree: phone is much easier.


Sent from my iPizzle using magic and new-fangled science stuff

Yea give him a call, I know Tony has a hard time getting to all his emails!

Alright guys! Here's the second half of my order from Tony, I'm sad cause I don't get to install them for another week and a half. Anyway, on to the pics!

Mini is curious
http://i62.photobucket.com/albums/h9...t/2de04b82.jpg
Mini approves
http://i62.photobucket.com/albums/h9...t/a1797efd.jpg
I approve
http://i62.photobucket.com/albums/h9...t/04c2e5ea.jpg
Close ups of the welds...
http://i62.photobucket.com/albums/h9...t/fc5a7bb2.jpg
http://i62.photobucket.com/albums/h9...t/371d1733.jpg
Enjoy! I'm dying to put them on, I'm going to be going stir crazy in Texas!



Sent from my iPizzle using magic and new-fangled science stuff

Quality spot right away.


Sent from my iPhone using Tapatalk

Let me know how u feel about headers. I'm planning on headers too!:)


Sent from my iPhone using Tapatalk

I love mine. :tup:

Talked to Tony & Nick today. Those guys are totally slammed, but that's a good thing!

Super nice & responsive though. Can't wait!