Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   CAI vs. SRI (http://www.the370z.com/intake-exhaust/41016-cai-vs-sri.html)

j370z78 08-13-2011 01:08 PM

CAI vs. SRI
 
This is of course going to be a dumb question as i'm sure most on here are technically inclined when it comes to tuning, however, i really need to know if there is a placement difference in the k&n CAI and SRI for my 370z. I previously owned a 2007 honda civic si and had many issues with water uptake from the CAI installed on it as the filter was so damn close to the underbody/ground that every time it rained the intake would get clogged with water and the engine would die. Needless to say, I changed to the Injen SRI for my civic in which i had no water issues as it was securely installed/mounted under the hood and no where near the underbody. My question here: Am I going to have water uptake issues with if i install K&N CAI on my 2011 370z ? Thanks for any advice you experienced tuners have for me.

Jason

nismo 1234 08-13-2011 01:24 PM

I don't think there is a k&n CAI only SRI. Stillen g3 is a CAI and the placement of the filter makes it hard for it to suck in water. Stillen g3 also has the most gain.
You can use search function to see The reviews

red6spd 08-13-2011 01:32 PM

:iagree: Go with the Stillen Gen3. Best gains and the only CAI where there is almost no possible way of having water ingestion.

Methodical4u 08-13-2011 04:05 PM

Quote:

Originally Posted by nismo 1234 (Post 1260165)
I don't think there is a k&n CAI only SRI. Stillen g3 is a CAI and the placement of the filter makes it hard for it to suck in water. Stillen g3 also has the most gain.
You can use search function to see The reviews

There isn't the K&N CAI... right now Stillen is king when it comes to intakes... Motordyne I believe will be developing one soon, but that could be a while.

XwChriswX 08-13-2011 04:14 PM

Also Takeda has just released a new CAI for the G37's, won't be much longer before the 370Z press release if you can hold out... Similar piping as the Stillens, but with rubber tubing to go between the shroud supports, supposedly you won't have to cut anything like you do with the Stillens. And it will consist of 1 large filter as opposed to 2 separate ones.

Nick911sc 08-13-2011 04:27 PM

Cold Air Intake System Takeda Intakes Infiniti G37 V6-3.7L<BR> TA-3016P - aFe Power

Is this the takeda you're talking about?

Methodical4u 08-13-2011 04:43 PM

Quote:

Originally Posted by Nick911sc (Post 1260339)

That's an interested concept... hopefully they will test it on a 370 as well since the G37's front is more open.

XwChriswX 08-13-2011 04:47 PM

Quote:

Originally Posted by Nick911sc (Post 1260339)

Thats the one. :tup:

Quote:

Originally Posted by Methodical4u (Post 1260365)
That's an interested concept... hopefully they will test it on a 370 as well since the G37's front is more open.

I'm waiting to hear back on whether or not the 370Z version is through with R&D. Hopefully should hear back on Monday.

Methodical4u 08-13-2011 04:51 PM

Quote:

Originally Posted by XwChriswX (Post 1260375)
Thats the one. :tup:



I'm waiting to hear back on whether or not the 370Z version is through with R&D. Hopefully should hear back on Monday.

awesome deal! I'm quite interested in that... but I wonder if it's going to be like the R2C's where on the G37's it produces a lot more power than supposedly on our cars... though no one has done an independent dyno so I can't confirm that.

XwChriswX 08-13-2011 04:54 PM

Quote:

Originally Posted by Methodical4u (Post 1260391)
awesome deal! I'm quite interested in that... but I wonder if it's going to be like the R2C's where on the G37's it produces a lot more power than supposedly on our cars... though no one has done an independent dyno so I can't confirm that.

Well that's just like Top Secret who made an SRI (out of Ti) and claim that it produces better gains than the Stillen Gen III's (A CAI). Yet still costs 5x as much... No one's bought it that I know of, and there have been no independent tests to confirm it...

Methodical4u 08-13-2011 07:35 PM

Quote:

Originally Posted by XwChriswX (Post 1260396)
Well that's just like Top Secret who made an SRI (out of Ti) and claim that it produces better gains than the Stillen Gen III's (A CAI). Yet still costs 5x as much... No one's bought it that I know of, and there have been no independent tests to confirm it...

who's going to for 1100.00? lol

theDreamer 08-13-2011 07:37 PM

Quote:

Originally Posted by XwChriswX (Post 1260396)
Well that's just like Top Secret who made an SRI (out of Ti) and claim that it produces better gains than the Stillen Gen III's (A CAI). Yet still costs 5x as much... No one's bought it that I know of, and there have been no independent tests to confirm it...

There are been independent dyno results.
http://www.the370z.com/intake-exhaus...e-intakes.html

Methodical4u 08-13-2011 09:09 PM

Quote:

Originally Posted by theDreamer (Post 1260557)
There are been independent dyno results.
http://www.the370z.com/intake-exhaus...e-intakes.html

I thought that was at the top secret dyno or something?

Methodical4u 08-13-2011 09:10 PM

either way... no one unless they are very very rich or just dumb is going to pay 1100.00 for a set of SRI's that put out basically the same power as a 525.00 set.

theDreamer 08-13-2011 09:11 PM

Nope, that was done in Houston, Texas.

Methodical4u 08-13-2011 09:33 PM

Quote:

Originally Posted by theDreamer (Post 1260664)
Nope, that was done in Houston, Texas.

oh ok

FL 4Motion 08-14-2011 12:56 AM

Quote:

Originally Posted by Nick911sc (Post 1260339)

hmmmm, intriging.

j370z78 08-14-2011 01:50 AM

Quote:

Originally Posted by red6spd (Post 1260174)
:iagree: Go with the Stillen Gen3. Best gains and the only CAI where there is almost no possible way of having water ingestion.

Thanks bud, just bought Stillen gen 3 for my 370z. Should be here by the end of the week

KB2 08-15-2011 01:50 PM

Anymore info on that takeda cai? That thing looks awsome! Definitely intrigued by that

XwChriswX 08-15-2011 05:01 PM

No word as of yet.

Rooskey 08-15-2011 07:54 PM

Quote:

Originally Posted by XwChriswX (Post 1263052)
No word as of yet.

Keep us posted Chris. I just wonder how that single filter is going to do?

Lemers 08-15-2011 08:28 PM

That 1 filter doesn't look any bigger than 2 stillen filters, but I do like the rubber pieces that avoid cutting

Methodical4u 08-15-2011 09:16 PM

Quote:

Originally Posted by Lemers (Post 1263388)
That 1 filter doesn't look any bigger than 2 stillen filters, but I do like the rubber pieces that avoid cutting

^^^ this

USAFZDRIVER 08-23-2011 11:02 PM

Any update on this?

XwChriswX 08-23-2011 11:05 PM

Still no words on the Takeda. The person who was supposed to let me know was busy with back to back shows so I'll peek in and find out...

However there is another brand of CAI coming out thats taking the complaints from both the Stillen and Injen CAI's and making one even better, at a cheaper cost. :tup:
But since I don't want to spoil the thunder, I can't say who yet. :rolleyes:

USAFZDRIVER 08-23-2011 11:08 PM

Thanks for the update Chris:tiphat: keep us posted please!

XwChriswX 08-23-2011 11:08 PM

No worries, what base are you at, I'm at Luke in AZ. Hate it, never ever come here! :rofl2:

USAFZDRIVER 08-23-2011 11:18 PM

Curently at Cannon AFB NM. I am from Phoenix, would kill for Luke!

XwChriswX 08-23-2011 11:23 PM

Quote:

Originally Posted by USAFZDRIVER (Post 1277452)
Curently at Cannon AFB NM. I am from Phoenix, would kill for Luke!

LoL I have no idea why, aside from being close to family... :rofl2:

USAFZDRIVER 08-23-2011 11:33 PM

Its home to me. Although I can understand why many would't like it. I can live anywhere, I dont care as long as I have a place for my vehicles and internet.

XwChriswX 08-23-2011 11:40 PM

I can live anywhere too, just I have a lot of hatred for this base for many reasons. I'd be happy anywhere, but not here.

USAFZDRIVER 08-23-2011 11:49 PM

I know what ya mean, PCS or deploy lol. Im content here, not a bad base at all, nice and sleepy. Most people hate it here though, it is what you make it it, right??:ugh2: I really hope Takeda releases this intake, the ONLY reason I havent gotten the G3 is if I want or need to return it to stock I can without any issues. or maybe the other brand your speak of....

USAFZDRIVER 09-05-2011 01:15 AM

Bump. Chris do you have any news? I'm excited about this release since I am a big AFE fan. Or any word on the other brand you mentioned? Thanks.

XwChriswX 09-05-2011 01:17 AM

Quote:

Originally Posted by USAFZDRIVER (Post 1298115)
Bump. Chris do you have any news? I'm excited about this release since I am a big AFE fan. Or any word on the other brand you mentioned? Thanks.

No official words from Takeda yet, but the 370Z version is in the final stages of R&D. The other brand I figured would have had a thread out by now, but I guess they're not quite ready for sales yet. But keep on the lookout.

USAFZDRIVER 09-05-2011 01:27 AM

sweet, i guess I just need to be patient. Thanks for the speedy response, I swear you are on this forum at all times...

XwChriswX 09-05-2011 01:34 AM

Quote:

Originally Posted by USAFZDRIVER (Post 1298135)
sweet, i guess I just need to be patient. Thanks for the speedy response, I swear you are on this forum at all times...

LoL I'm only here when I'm needed. :stirthepot:

FL 4Motion 09-05-2011 06:04 PM

Quote:

Originally Posted by XwChriswX (Post 1298149)
LoL I'm only here when I'm needed. :stirthepot:

...like batman...

XwChriswX 09-05-2011 06:13 PM

Quote:

Originally Posted by FL 4Motion (Post 1298803)
...like batman...

http://i967.photobucket.com/albums/a...in/Batman4.gif

FL 4Motion 09-05-2011 06:21 PM

Quote:

Originally Posted by XwChriswX (Post 1298815)

exactly...:bowrofl:

XwChriswX 09-05-2011 06:26 PM

Quote:

Originally Posted by FL 4Motion (Post 1298824)
exactly...:bowrofl:

:tup:


All times are GMT -5. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2