Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   CNT Racing V2 370z Catback Exhaust (Sound clip, Pictures included) (http://www.the370z.com/intake-exhaust/30049-cnt-racing-v2-370z-catback-exhaust-sound-clip-pictures-included.html)

zefaulter 10-08-2014 09:22 PM

For whoever is interested in this exhaust, once you get it, make sure you get the H pipe portion welded. There is exhaust leak and noticeable power loss because of it.
http://i35.photobucket.com/albums/d1...ps1154acf2.jpg

bvdawg13 10-29-2014 05:18 PM

On my 2013 Z, I had this exhaust with test pipes. Always had that raspy exhaust leak on the decel, had the H pipe welded and still continued to hear that leak, but not as bad as before the weld.

Elmo370z 10-29-2014 07:28 PM

Should of just went with fast intentions

wheee! 10-29-2014 07:34 PM

Quote:

Originally Posted by Elmo370z (Post 3016247)
Should of just went with HKS

Fixed :tup:

Smashley 11-09-2015 03:52 PM

I am considering this exhaust, any long term issues?

zefaulter 11-09-2015 04:16 PM

Quote:

Originally Posted by Smashley (Post 3343888)
I am considering this exhaust, any long term issues?

nope but it's too damn quiet for me now LOL.... I'll sell you mine if you want

OldFart 11-09-2015 05:29 PM

Stepped band clamp will fix the exhaust leak at the connection of H pipe, had mine for about 1 1/2 years and still no complaints.

zefaulter 11-20-2015 09:58 AM

I'm selling mine if anyone wants a good deal!

Burnt350 02-10-2016 06:26 PM

Just had mine installed today that I purchased from ERZ but from their eBay Store. Overall I am 99% happy. I had the "clamp" part welded and everything fit like a glove. There are a couple of issues however......

1. The part of the muffler that the tip bolts on was welded crooked, thus the holes are angled and not horizontal. This is on the driver side. The passenger side is nice and level.

2. The tips were sorta scratched up. I may just get some steel wool and polish them. Or order different tips.... I really like the Blue Titanium Ones :)

I'll take some pics tomorrow and post up for everyone.

TopgunZ 02-10-2016 06:53 PM

Please do.

Burnt350 02-11-2016 08:29 AM

Alrighty, here are some pics...... Tried to get what I could without jacking up the car.

**EDIT** I just noticed that the left was higher than the right so I put a couple of washers behind the left hanger bracket and now they are even..

Full Rear.

http://i1292.photobucket.com/albums/...psupiwxa6o.jpg

http://i1292.photobucket.com/albums/...pshozp0okl.jpg

Tried to focus on the clearance from the rear bar.

http://i1292.photobucket.com/albums/...psn9opjqew.jpg

Driver side and the uneven tip.

http://i1292.photobucket.com/albums/...psyvpicqc7.jpg

TopgunZ 02-11-2016 10:10 AM

Did this come with the exhaust H clamp instead of having to weld that section? How does it sound compared to your stock one?

Burnt350 02-11-2016 11:15 AM

Quote:

Originally Posted by TopgunZ (Post 3410381)
Did this come with the exhaust H clamp instead of having to weld that section? How does it sound compared to your stock one?

Yes it came with the clamp but we decided to weld instead to ensure a good leak proof seal.

The sounds is great. Nice deep rumble and good smooth sound on acceleration.

kpic 06-12-2016 03:48 PM

Quote:

Originally Posted by Burnt350 (Post 3410483)
Yes it came with the clamp but we decided to weld instead to ensure a good leak proof seal.

The sounds is great. Nice deep rumble and good smooth sound on acceleration.

Are you still happy overall? I'm looking at this or the stillen cbe. Any other issues with quality after a few months of driving with it?

Sent from my HTC One M9 using Tapatalk


All times are GMT -5. The time now is 11:12 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2