MOTORDYNE ART Pipes - Review

AlphaSnacks · 09-07-2011, 12:47 PM

Quote:

Originally Posted by tommyguns

Could use a price point for the install of the pipes and a tune I would assume.
Thanks again,
TommyGuns

120 for test pipe install.

Tune...well that differs. UpRev is $500-600 and you can do an e-tune with UpRev (which runs $50). E-Tune is you driving the car on the street, logging the data, and sending those logs out to UpRev. They look at the logs, and send you back a tune with all of the adjustments made to your AFR, timing, etc. Virtually identical to how a dyno tune works, except you don't have any horsepower numbers from a machine.

tommyguns · 09-07-2011, 01:25 PM

I already have the uprev done. What I'm assuming is that It will have to be done again. I'm looking for a price for that.
Thanks

ANMVQ · 09-08-2011, 06:13 AM

Quote:

Originally Posted by Methodical4u

if you don't have any HFC's or TP's you will be well over... if you have something already you will get at least a few hp over what you have now... but the throttle response is just the coolest part of the pipes, and it's got a really nice tone too!

Yea do not have anything, Stock cats :/. So hoping these will be a nice increase.

Motordyne · 09-08-2011, 09:27 AM

Quote:

Originally Posted by tommyguns

I already have the uprev done. What I'm assuming is that It will have to be done again. I'm looking for a price for that.
Thanks

If you already have a tune for any other breather mods, adding in ART pipes won't be an issue.

Methodical4u · 09-08-2011, 11:08 AM

Quote:

Originally Posted by ANMVQ

Yea do not have anything, Stock cats :/. So hoping these will be a nice increase.

then you will feel a HUGE pickup of power, that is the most restrictive part

kosstick · 09-08-2011, 11:11 AM

37drift any update???

kosstick · 09-08-2011, 03:00 PM

Quick question guys.

I have a whine that developed after I got my motordyne art pipes and my 25 row oil cooler.

During high rpms I have this whine noise from front/mid of the car. I am thinking it it more of the art pipes. Art pipes are causing a turbine sound to form during regular street driving which I suspect is the same thing I am hearing at higher rpms (just more whinier).

Can anyone elaborate on this?

daisuke149 · 09-08-2011, 03:02 PM

oil coolers will have a whine if you have the thermostatic plate and do not have the line covers and the lines are resting up against any part of the chassis.

what exahust do you have btw.

kosstick · 09-08-2011, 07:45 PM

Quote:

Originally Posted by daisuke149

oil coolers will have a whine if you have the thermostatic plate and do not have the line covers and the lines are resting up against any part of the chassis.

what exahust do you have btw.

Invidia Gemini, I think it might be the pipes. Some guy with the ark was talking about a whistle at his X pipe, maybe the same thing with mine?

Footloose301 · 09-08-2011, 08:19 PM

I have a whine but it's only noticeable in 6th gear when accelerating from like 3-5k Rpm.

Motordyne · 09-08-2011, 09:39 PM

Quote:

Originally Posted by daisuke149

oil coolers will have a whine if you have the thermostatic plate and do not have the line covers and the lines are resting up against any part of the chassis.

what exahust do you have btw.

^+1 I've seen(heard) this before.

Methodical4u · 09-08-2011, 10:43 PM

i've heard a whine in 1st gear right next to a wooden fence with no engine load... I think it's just the gears... never heard it at higher rpms though, and never loud.

kosstick · 09-08-2011, 10:58 PM

it sounds like a turbine lol, HEres a vid its a little hard to hear but lemme know.

Motordyne · 09-09-2011, 01:23 AM

Yep. That's the sound of the oil pump being transmitted through the hoses and into the chassis. Isolate the hoses from the chassis with a hose wrap or similar.

brucelidat · 09-09-2011, 02:07 AM

Got a good deal on some HFCs so I guess I'll be going ti the FI CBE instead of waiting for the Motordyne. I may get the m370 in the future though.

09-07-2011, 01:25 PM	#767 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 64 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 16	I already have the uprev done. What I'm assuming is that It will have to be done again. I'm looking for a price for that. Thanks __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

09-08-2011, 08:19 PM	#775 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 21	I have a whine but it's only noticeable in 6th gear when accelerating from like 3-5k Rpm. __________________ 2010 40th Anniversary 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review: Motordyne M370 Manifold w/ Comparisons	Staples	Intake/Exhaust	66	06-21-2014 01:35 PM
Motordyne test pipes?	Dan Z Man	Intake/Exhaust	37	12-15-2010 09:12 PM
Motordyne Intake Manifold on the way!!	GZ3	Intake/Exhaust	67	09-16-2010 12:49 AM
another FI 18" CF CBE review w/ test pipes	mrdino77	Intake/Exhaust	9	05-27-2010 12:13 PM

09-08-2011, 11:11 AM	#771 (permalink)
kosstick Track Member Join Date: Apr 2011 Location: Los Angles Posts: 668 Drives: G37 Rep Power: 15	37drift any update???

09-08-2011, 03:00 PM	#772 (permalink)
kosstick Track Member Join Date: Apr 2011 Location: Los Angles Posts: 668 Drives: G37 Rep Power: 15	Quick question guys. I have a whine that developed after I got my motordyne art pipes and my 25 row oil cooler. During high rpms I have this whine noise from front/mid of the car. I am thinking it it more of the art pipes. Art pipes are causing a turbine sound to form during regular street driving which I suspect is the same thing I am hearing at higher rpms (just more whinier). Can anyone elaborate on this?

09-08-2011, 03:02 PM	#773 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	oil coolers will have a whine if you have the thermostatic plate and do not have the line covers and the lines are resting up against any part of the chassis. what exahust do you have btw.

09-08-2011, 10:43 PM	#777 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	i've heard a whine in 1st gear right next to a wooden fence with no engine load... I think it's just the gears... never heard it at higher rpms though, and never loud.

09-08-2011, 10:58 PM	#778 (permalink)
kosstick Track Member Join Date: Apr 2011 Location: Los Angles Posts: 668 Drives: G37 Rep Power: 15	it sounds like a turbine lol, HEres a vid its a little hard to hear but lemme know.

09-09-2011, 01:23 AM	#779 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 16	Yep. That's the sound of the oil pump being transmitted through the hoses and into the chassis. Isolate the hoses from the chassis with a hose wrap or similar.

09-09-2011, 02:07 AM	#780 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	Got a good deal on some HFCs so I guess I'll be going ti the FI CBE instead of waiting for the Motordyne. I may get the m370 in the future though.