Nissan 370Z Forum - F.I. Long-Tube Headers installed

Page 10 of 10

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Intake/Exhaust (http://www.the370z.com/intake-exhaust/)

- - F.I. Long-Tube Headers installed - Review/Pics/Vids/Dyno (http://www.the370z.com/intake-exhaust/18022-f-i-long-tube-headers-installed-review-pics-vids-dyno.html)

cotizi

05-30-2010 05:29 PM

thanks. what did your torque your stuff down to? service manual looks like 11 ft-lbs for studs and 22 for bolts on stock headers. Didn't see any criteria from Tony on those in the instructions.

Daishi

06-01-2010 12:06 PM

Quote:

Originally Posted by cotizi (Post 556395)

Ben, did any of your studs come out when taking the stock headers off? Virtually all mine did and i'm not sure what the proper tool is to remove the nut from the stud-bolt. I also stripped one of those little heat-shield bolts on the drivers side :(

most of the studs will come out when you do the install. when i did my install i didnt take the nut off the stuff i just put it back in the way it came off and didnt run into any problems at all. just be carefull you dont crossthread anything

cotizi

06-01-2010 12:15 PM

thanks. i got all my studs back in and my passenger header on. right now my o2 sensors are pretty stuck in my stock headers so im gonna try and get someone to pull them out without breaking them.

All times are GMT -5. The time now is 10:34 AM.

Page 10 of 10

« First

Show 40 post(s) from this thread on one page