Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Z1 headers with MD art pipes (http://www.the370z.com/intake-exhaust/129235-z1-headers-md-art-pipes.html)

JamesTheBrain 12-08-2018 09:36 PM

Z1 headers with MD art pipes
 
Hey guys I plan on getting headers down the road and want to get z1's branded headers. My only question is will those headers fit correctly with their new 3 bolt metal flanges with motordyne art test pipes

OptionZero 12-08-2018 10:05 PM

why not go motordyne + motordyne?

NorthStyle 12-09-2018 07:11 AM

For Z1 headers, you need to use 350Z DE ART pipes.

JamesTheBrain 12-09-2018 10:55 AM

Quote:

Originally Posted by OptionZero (Post 3804880)
why not go motordyne + motordyne?

I dont believe motordyne sells short tube headers

JamesTheBrain 12-09-2018 11:05 AM

Quote:

Originally Posted by NorthStyle (Post 3804910)
For Z1 headers, you need to use 350Z DE ART pipes.

The headers come with the de flanges as an option. that wont work even if my art pipes work with 350's and 370's??

AlWakRa 12-09-2018 12:16 PM

I was planning to go this direction, Z1 shorties + DE Art pipes. Instead, I opted for Motordyne lth with helmholtz resonators (shorter than art pipe resonators).

NorthStyle 12-09-2018 04:07 PM

Quote:

Originally Posted by JamesTheBrain (Post 3804953)
The headers come with the de flanges as an option. that wont work even if my art pipes work with 350's and 370's??

The DE flanges are the only option available for the Z1 headers, since they're based off of the Momentum headers. If your ART pipes are for the 350Z HR or 370Z VHR, they won't work.

Quicksilvers 12-09-2018 04:33 PM

Quote:

Originally Posted by NorthStyle (Post 3804910)
For Z1 headers, you need to use 350Z DE ART pipes.

It will not work unless it is fabricated by you or a exhaust shop. You will only be able to use the DE flanges with the Z1 headers. I recommend not using the Z1 exhaust gaskets unless you want a exhaust leak. Other people and myself have used the FI exhaust gaskets with no exhaust leaks.

JamesTheBrain 12-09-2018 09:20 PM

Quote:

Originally Posted by Quicksilvers (Post 3804983)
It will not work unless it is fabricated by you or a exhaust shop. You will only be able to use the DE flanges with the Z1 headers. I recommend not using the Z1 exhaust gaskets unless you want a exhaust leak. Other people and myself have used the FI exhaust gaskets with no exhaust leaks.

So can I go z1 headers with the fast intentions gaskets? Thanks for the info guys

Quicksilvers 12-09-2018 10:31 PM

Quote:

Originally Posted by JamesTheBrain (Post 3805050)
So can I go z1 headers with the fast intentions gaskets? Thanks for the info guys

Yes, I don’t see why you can’t use the FI exhaust gaskets. Just make sure the flange size matches the exhaust gasket size it is that simple. I had to take apart my exhaust once before to replace the Z1 exhaust gaskets that were leaking. Having talked with Z1 about their exhaust gaskets and the fact that they were leaking they denied that their exhaust gaskets leaked and could care less. Save yourself the misery and get the FI gaskets. Have you considered installing full length headers instead?

johnnydrama 12-10-2018 09:26 AM

Quote:

Originally Posted by AlWakRa (Post 3804960)
I was planning to go this direction, Z1 shorties + DE Art pipes. Instead, I opted for Motordyne lth with helmholtz resonators (shorter than art pipe resonators).

I would second this recommendation.

NorthStyle 12-10-2018 10:11 AM

Quote:

Originally Posted by Quicksilvers (Post 3805066)
Yes, I don’t see why you can’t use the FI exhaust gaskets. Just make sure the flange size matches the exhaust gasket size it is that simple. I had to take apart my exhaust once before to replace the Z1 exhaust gaskets that were leaking. Having talked with Z1 about their exhaust gaskets and the fact that they were leaking they denied that their exhaust gaskets leaked and could care less. Save yourself the misery and get the FI gaskets. Have you considered installing full length headers instead?

I was running the Z1 metal gaskets and yeah, those things were leaking after a few days... garbage. After that, I ran the Berk gaskets and recently replaced them with Vibrant gaskets when I did my short shifter install. I have the normal FI gaskets on my exhaust and they're good as well. I'd recommend any of those (Berk/Vibrant/Fast Intentions).


All times are GMT -5. The time now is 10:45 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2