Will i loose low end punch if ?
 

I just bought a FI CBE. For my 2013 nismo will i loose low end punch off the line or does it create power from low rpms range to redline?

You're not going to notice anything.

In my experience it provide it bit more "giddy up and go" in any range of the RPMS. From dynos they show that it provides a good addition in whp

Ok Good to know. Well since i have you boys attention. This is going to be my mods. Test pipes, FI cbe 18inch resonators, stillen gen3 cold air intakes, Z1 plenum and rev-up tune. is this a good platform to wake this car up?

Except for how sweeeeeeet his car sounds after installing it:tup:

All good...although, look into EcuTek over UpRev...many more tuning options and more flexibility.
EcuTek - Nissan 370Z

Sounds like a good setup you have going! I would suggest if you are going to replace the plenum, do the Ported Lower and Upper Manifolds as well

Costs a bit more in parts and labor but you will be extremely happy making close to 350whp if you tune it to a race format. That is very good for N/A. If you want really high power goals, forget all that stuff you said up there, and Send your car to FI for a TT, Test pipe, Exhaust and tune. Along with the Clutch, flywheel, pressure plate, do the CSC ELIM KIT from Z1 as well regardless which way you go.

Sounds like you got a good start ahead of you, when you get parts in make a build thread too!

Member's 370Z Gallery - Nissan 370Z Forum

Wo there cowboy lol. Loved to do all that but thats all the budget i have right now. But thankx on the vote of confidence on what i have on the way. 8-12weeks for the exhaust that sucks. plenum and test pipes are in the mail got the stillen gen3 today.

Hey what about the RJM Performance adjustable clutch pedal ? committed to buy this off of a member here. I hate the way the clutch feels.

That it does, I got my FI 18" res CF exhaust off a member here with like 3000 miles on it if that. They looked almost brand new.

As for the RJM pedal, find a shop that will install it first before you buy it. Some buyers have a problem finding a shop that will install it for them due to the small space to work with and the amount of time it takes to install.

If you do the work yourself, have fun haha! :tiphat:

[That it does, I got my FI 18" res CF exhaust off a member here with like 3000 miles on it if that. They looked almost brand new. ]

Lucky dude. Yea I'll be doing all the work myself. 3 jacks to get her in the air 4 jack stands to keep her there. Got any feed back on this RJM Performance adjustable clutch pedal? Is it worth it and will it make the car nicer to shift?

You're not going to lose anything with the cbe.

thankx for all the feed back on the cbe and mods. but feed back on the RJM Performance adjustable clutch pedal. would be great. like i said my 350z is alot easier to shift heel to tow then the crappy feeling nismo clutch pedal.

Read through some of the build/journal threads. That will give you an idea. If you go there mine. You can see how I progressed.

This is what FI LTH's, 12" resonators, and cbe sounds like. The mike is taped just below the license plate.

Rjm pedal for sure. It was my very first mod. Can't stand the stock pedal. If you are handy at all, you should be able to do it yourself. It comes with good instruction.

[QUOTE=Rusty;3444108]Read through some of the build/journal threads. That will give you an idea. If you go there mine. You can see how I progressed.

This is what FI LTH's, 12" resonators, and cbe sounds like. The mike is taped just below the license plate.

[/QUOTE

Sounds killer. That track was cool how long of a track is it and what were your oil temps pushing your car that hard? Oh and good driving.:tup: