I should be getting built this year. Not sure when, but when my 3" down pipes and external waste gates come in I will be turning up the boost. Not to mention I will be going from a 6psi spring to a 7psi spring. So I will be running a little higher hp numbers at all times. If I lower the compression when building the block I will need to replace those stock springs most likely again with something like 8 or 9psi, I think. I will have to talk with Sam about this.

Lol some people need to google more and do more research, where's Alberto when you need him lmfao...

Did sam ever post the power packages with price like he said?I can't remember what thread it was he said he was going to post it in but I figured here would be just as good

Look at the website

his website is tricky thanks though.

It's not that tricky, what kinda package are you looking for?

Do you know what we really need to make 600 hp reliably?

GTM Stage 1 shortblock

And there goes my point from what previous posts said you will need more then that. From previous posts by Sam he said there would need to be some valve work. Not sure if he said valves and springs or just tougher springs. Also I Don't need a short block mailed out to me. Why not just buy the pistons and rods and assemble your self. Also I think the short blocks don't show for the vq37 but for the vq35. So I still stand behind my statement that his website is tricky

Call Sam. He will explain it all. He will give you correct and accurate information. Tell him your goal and he will tell you what you need.

lol already did this a while ago and he said he would send some packages over to me. I am not in a dire rush but plan on doing this in the winter and want to know what to expect. I think everyone knows me by now that if I want something I am going to call him if I need it. Hell i did spend like 12 k with GTM so I am not bashfull to talk to him. Was just wondering if he posted it becausae if he did then I don't need to call him

lol better yet...ill talk to you on aim :tup:

This produces 600HP without forced induction?

oo heck no its capable of supporting up to 600. Only way your getting to 600 is FI

The shortblock packages show for the 370z, it's just the VQ motors are similar so the site just shows what's available. You'll be saving money just buying the stg.1 block & it's more then just pistons/rods in this package. Why send the motor out to a random shop to get assembled & balanced, when you know there will be less of a chance for something to go wrong if Sam/GTM builds their product for you.