Originally Posted by G37sHKS New Shortblock with New Crank Wiseco Custom Pistons 9.5 CR. Stock bore size Polydyn Gold Ceramic coat on Piston top Polydyn Moly Coat on side skirt
|
|
LinkBack | Thread Tools | Display Modes |
07-25-2013, 07:38 AM | #31 (permalink) | |
A True Z Fanatic
Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51864 |
Quote:
__________________
|
|
07-25-2013, 11:20 PM | #35 (permalink) |
A True Z Fanatic
Join Date: Aug 2010
Location: Keystone state
Posts: 1,209
Drives: 2010 370z
Rep Power: 20152 |
Nice parts list you have there in for results
Whats the power goal for high boost ?
__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ |
07-26-2013, 07:23 AM | #36 (permalink) | |
A True Z Fanatic
Join Date: Feb 2010
Location: Dubai
Posts: 1,183
Drives: 09 G37S Coupe 7AT
Rep Power: 20 |
Thank you!
Quote:
For now im looking to make 600 WHP on high boost anything beyond that will be a bonus for me, and 500 WHP on low boost My external wastegate sping is 10 PSI |
|
07-26-2013, 07:36 AM | #38 (permalink) |
A True Z Fanatic
Join Date: Feb 2010
Location: Dubai
Posts: 1,183
Drives: 09 G37S Coupe 7AT
Rep Power: 20 |
Indeed.
I dont want to be the king of the street or break the track record of VHR engines, I just want it to be engineered as is reliable on street but is fast on track. |
07-26-2013, 03:35 PM | #39 (permalink) | |
A True Z Fanatic
Join Date: Aug 2010
Location: Keystone state
Posts: 1,209
Drives: 2010 370z
Rep Power: 20152 |
Quote:
No problem man glad to see you going forward with the project I really think you should upgrade your housings to reach your goal of 600 whp on high boost with 9:5 CR. With the lower compression it's going to take more boost to make 500 plus WHP and to reach 600 WHP I think the turbos will run out of steam and hit a wall. I say this because two car's I know of that are local and built motor TT have yet to hit 600 whp . Your in Dubai it's hot you don't want to push the turbos to the limit and blow hot air into the engine your better off making more efficient power with bigger housings.
__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ |
|
07-26-2013, 03:48 PM | #40 (permalink) |
A True Z Fanatic
Join Date: Feb 2010
Location: Dubai
Posts: 1,183
Drives: 09 G37S Coupe 7AT
Rep Power: 20 |
Thats a good point.
Do you mind sharing the spec of build and power of these local guys like what PSI is the max they could go and what CR they have? I want to go to the limit with these turbos before upgrading. You and I know that we are waiting for GTM to release the T25+ housing for their new manifold so I really dont want to upgrade anything till GTM release the new technology |
07-26-2013, 05:10 PM | #41 (permalink) | |
A True Z Fanatic
Join Date: Oct 2011
Location: Southwest FL
Posts: 1,374
Drives: G37S
Rep Power: 28 |
Quote:
OP Squeeze has already been down that path. Good advice. |
|
07-26-2013, 10:57 PM | #42 (permalink) | |
A True Z Fanatic
Join Date: Aug 2010
Location: Keystone state
Posts: 1,209
Drives: 2010 370z
Rep Power: 20152 |
Quote:
One car is 10:1 CR at 15 pounds 570-580 whp and the other is 17 PSI 9:1 and around the same power level.Consider this on my build my low boost spring pressure 10:1 CR GT3071 .64 A/R makes 596 whp 14 PSI on a Dynojet. That's Fast intentions 3 inch exhaust. On my higher boost settings I hit a wall of back pressure, with smaller turbos you will run into that wall much sooner than I have. The T25 plus housings have been out from Garret for a long time now its the manifolds that are needed. At this point it's so late in the year it will most likely be a winter project once the manifolds come out ,the turbos are a pain to get out to swap housings.
__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ |
|
07-28-2013, 08:18 AM | #45 (permalink) | |
A True Z Fanatic
Join Date: Feb 2010
Location: Dubai
Posts: 1,183
Drives: 09 G37S Coupe 7AT
Rep Power: 20 |
Quote:
He said he will post something here soon with details about turbos and etc Last edited by G37sHKS; 07-28-2013 at 08:25 AM. |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[FOR SALE] AAM Fuel Return System | Kim@Forged | Parts for sale (Private Classifieds) | 13 | 04-11-2013 01:47 PM |
Wicked CAS Staged systems Stage 1 and Now looking at Stage 2 | Wicked CAS | Audio & Video | 7 | 03-07-2013 04:47 PM |
Converting to return fuel system? (turbo) | overlord | Engine & Drivetrain | 9 | 04-28-2012 02:12 PM |
Forged Performance: GT-R 4.0L FP1-R + FP Spec Stage 3 Trans Build | ChadB@Forged | Other Vehicles | 1 | 02-23-2012 02:06 PM |