Nissan 370Z Forum
Page 29 of 279 « First 192728 29 30313979129 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   *****Fast Intentions "Twin Turbo Kit" is here***** (http://www.the370z.com/forced-induction/65737-fast-intentions-twin-turbo-kit-here.html)

98intrigue 02-14-2013 12:13 PM
Quote:
Originally Posted by F.I. Inc. (Post 2164770)
Update,

We have "brand new" Mickey Thompson E.T. Street Radials on the way.

We have the Turbosmart E Boost 2 on the way. (Electronic Boost Controller)

We are headed back to the dyno next Tuesday February 19th for another session. We are confident that we have the fuel pressure drop off solved. If this holds true, we will be able to turn up the boost and see what the car can put down on the Stage 1+ kit w/103 octane.

Our plan is to head back to the track next Friday February 22nd to see what we can run.

Stay tuned...
:stirthepot: I hope to hear of a record breaking night for a manual transmission VQ37 motor... With the way the car ran the other night, I can certainly see a new record possible.

TerribleONE 02-14-2013 12:21 PM
Quote:
Originally Posted by SS_Firehawk (Post 2164791)
It has base brakes on the video's
good eye

Quote:
Originally Posted by Nixlimited (Post 2164948)
D'oh. It may be hard to find small diameter rims for the sport...


In related news, that car is gonna need some upgraded brakes with that TT kit!
I think you would be very hard pressed to get any smaller than 18s on the sport brakes.. anyone know if 17s fit over the rears? I have a akebono BBK with Z1 rotors and endless pads ready to go on however we waited on installing them so we would be able to run the 16s.

TerribleONE 02-14-2013 12:22 PM
Quote:
Originally Posted by 98intrigue (Post 2164974)
:stirthepot: I hope to hear of a record breaking night for a manual transmission VQ37 motor... With the way the car ran the other night, I can certainly see a new record possible.
This is our goal and I am very confident these guys can make it happen!

TerribleONE 02-14-2013 12:31 PM
Boost controller arrived! Only if everything would ship so fast!

http://i50.tinypic.com/11izpti.jpg

also a little BOV/dyno pull videos that I took personally with my gopro. The camera is in the case with the waterproof door on so some sound was lost but if you turn it up it should get your hair to stand up (it did for me)

http://www.youtube.com/watch?v=szS2YJUDLag

LukasC 02-14-2013 01:18 PM
That sounds so good!

XwChriswX 02-14-2013 02:22 PM
Just curious about the fact all of the dyno vids I've seen have the front bumper off...

How is the filters being in that location going to work with the bumper on? (Assuming OEM bumper) won't they be somewhat stifled in that location and not get as much air?

A Zele or Stillen front clip would solve that problem. :tup:

Sh0velMan 02-14-2013 02:32 PM
Quote:
Originally Posted by XwChriswX (Post 2165182)
Just curious about the fact all of the dyno vids I've seen have the front bumper off...

How is the filters being in that location going to work with the bumper on? (Assuming OEM bumper) won't they be somewhat stifled in that location and not get as much air?

A Zele or Stillen front clip would solve that problem. :tup:
You have to take out the side shields, so plenty of air will slip past into that area.

That said, Zele would be great, Stillen at least better than stock.

XwChriswX 02-14-2013 02:34 PM
Quote:
Originally Posted by Sh0velMan (Post 2165194)
You have to take out the side shields, so plenty of air will slip past into that area.

That said, Zele would be great, Stillen at least better than stock.
Ah okay, I was expecting there to be some reasoning for this, I didn't know parts would be removed. :tup:


Agreed, I'm going by way of Zele when the time comes for body work. :excited:

FPenvy 02-14-2013 02:36 PM
Quote:
Originally Posted by XwChriswX (Post 2165196)
Ah okay, I was expecting there to be some reasoning for this, I didn't know parts would be removed. :tup:


Agreed, I'm going by way of Zele when the time comes for body work. :excited:
popping off those little blocking plates in the bumper was the first thing i did after i got my intakes on. :tup:

XwChriswX 02-14-2013 02:37 PM
Quote:
Originally Posted by FPenvy (Post 2165204)
popping off those little blocking plates in the bumper was the first thing i did after i got my intakes on. :tup:
Even though they don't inhibit your filter's location??

TopgunZ 02-14-2013 02:38 PM
The carbon signal raptor would feed it some mad air too.

FPenvy 02-14-2013 02:40 PM
Quote:
Originally Posted by XwChriswX (Post 2165207)
Even though they don't inhibit your filter's location??
better airflow without them i feel so i took them off. they come off with like 3 or 4 screws each. took 2 minutes.

KaienZ34 02-14-2013 02:41 PM
He has a full amuse kit painted and ready to go.

G37Sam 02-14-2013 02:43 PM
This thread just keeps getting better!! Some records will be broken very soon!

XwChriswX 02-14-2013 02:44 PM
Quote:
Originally Posted by KaienZ34 (Post 2165220)
He has a full amuse kit painted and ready to go.
Even though the amuse doesn't really have much venting into the side areas, that's still cool to have in your back pocket ready to go.


All times are GMT -5. The time now is 01:36 AM.
Page 29 of 279 « First 192728 29 30313979129 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2