Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   *****Fast Intentions "Twin Turbo Kit" is here***** (http://www.the370z.com/forced-induction/65737-fast-intentions-twin-turbo-kit-here.html)

TopgunZ 12-04-2013 01:03 PM

Quote:

Originally Posted by TerribleONE (Post 2594552)
The BOVs definitely do not sound quite as crazy inside the car but they still sound great! Loud enough to make you want to roll into boost every time you drive it. Especially if there are retaining walls next to you or a tunnel!

Yeah I miss my 350 single turbo and Tial BOV. That thing would pop off LOUD! But a good loud..not some cartoony loud HKS crap.

How about the intake sound? In the video it sounds like it was about to suck your fenders right up your intakes..lol..

faceglide 12-04-2013 01:12 PM

Yeah...he's still got 2 psi to go.

Being that the bovs are outside the engine bay. They should be a lot more enjoyable with the Windows down vs inside the semi sealed engine bay.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

fuct 12-04-2013 01:18 PM

do you have that same video without the music? :ughdance:

TerribleONE 12-04-2013 01:44 PM

Quote:

Originally Posted by TopgunZ (Post 2594569)
Yeah I miss my 350 single turbo and Tial BOV. That thing would pop off LOUD! But a good loud..not some cartoony loud HKS crap.

How about the intake sound? In the video it sounds like it was about to suck your fenders right up your intakes..lol..

The intake sound is amazing. I will get some flyby videos for you guys soon.

Quote:

Originally Posted by faceglide (Post 2594581)
Yeah...he's still got 2 psi to go.

Being that the bovs are outside the engine bay. They should be a lot more enjoyable with the Windows down vs inside the semi sealed engine bay.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

With the windows down the BOVs sound amazing!

Quote:

Originally Posted by fuct (Post 2594588)
do you have that same video without the music? :ughdance:

Yes I do I can upload it later. Also see my other video on my youtube channel running a different canyon with no music. For some reason when I uploaded the video it seems like the music is louder then when I was editing it in Imovie :confused:

fuct 12-04-2013 03:43 PM

im all for some sweet EDM, but i wana hear the car!!!!! :D

cycy89 12-05-2013 10:04 AM

I like the wheels on that r8. Hook it up Tony! :D

09Bumblebee 12-06-2013 12:00 PM

PM Sent

Quote:

Originally Posted by F.I. Inc. (Post 2590545)
Thanks for the support buddy. We could not of gotten to this point without your help.

It was great having you in our booth at the show today. Your clutch/flywheel combo for the Z33/Z34 is solid! We are going to push it hard.

Tony


Hotrodz 12-06-2013 07:17 PM

I got a great update from Seb at SpecialtyZ this morning. He said:

"So far we've installed the Whiteline Diff Bushings, Eibach rear sway bar, clutch and flywheel, new rear main seal, driver side exhaust manifold, turbo is mounted on that side, fuel pump, fuel injectors, spark plugs, OEM intake manifold, TBs swapped, water lines deleted on the TBs, Boost controller and wideband gauge are mounted." :happydance:

He is hoping to get more done and the engine back in place next week. If you want to see picture of the progress, check it out on their Facebook site https://www.facebook.com/pages/Specialty-Z. It's just awesome knowing its going to happen anytime...boooooost!:p

F.I. Inc. 12-06-2013 07:58 PM

Quote:

Originally Posted by Hotrodz (Post 2598417)
I got a great update from Seb at SpecialtyZ this morning. He said:

"So far we've installed the Whiteline Diff Bushings, Eibach rear sway bar, clutch and flywheel, new rear main seal, driver side exhaust manifold, turbo is mounted on that side, fuel pump, fuel injectors, spark plugs, OEM intake manifold, TBs swapped, water lines deleted on the TBs, Boost controller and wideband gauge are mounted." :happydance:

He is hoping to get more done and the engine back in place next week. If you want to see picture of the progress, check it out on their Facebook site https://www.facebook.com/pages/Specialty-Z. It's just awesome knowing its going to happen anytime...boooooost!:p

More to the update. We are working on your 3" Down Pipes and recirculated wastegates as well. Your car and nklear's should be on the dyno back to back.

Thanks, Tony

Hotrodz 12-06-2013 08:09 PM

Tony, thanks...that is awesome!!!!!! I hope you guys will take some video...this is when it's hard to be 5hrs away!

TerribleONE 12-06-2013 08:16 PM

Quote:

Originally Posted by Hotrodz (Post 2598417)
I got a great update from Seb at SpecialtyZ this morning. He said:

"So far we've installed the Whiteline Diff Bushings, Eibach rear sway bar, clutch and flywheel, new rear main seal, driver side exhaust manifold, turbo is mounted on that side, fuel pump, fuel injectors, spark plugs, OEM intake manifold, TBs swapped, water lines deleted on the TBs, Boost controller and wideband gauge are mounted." :happydance:

He is hoping to get more done and the engine back in place next week. If you want to see picture of the progress, check it out on their Facebook site https://www.facebook.com/pages/Specialty-Z. It's just awesome knowing its going to happen anytime...boooooost!:p

:tup:

Quote:

Originally Posted by F.I. Inc. (Post 2598473)
More to the update. We are working on your 3" Down Pipes and recirculated wastegates as well. Your car and nklear's should be on the dyno back to back.

Thanks, Tony

Dont forget about mine ;)

Quote:

Originally Posted by Hotrodz (Post 2598487)
Tony, thanks...that is awesome!!!!!! I hope you guys will take some video...this is when it's hard to be 5hrs away!

I am sure there will be video! Trust me, you are going to fall in love with your Z all over again!

GaleForce 12-06-2013 08:16 PM

Quote:

Originally Posted by Hotrodz (Post 2598417)
I got a great update from Seb at SpecialtyZ this morning. He said:

"So far we've installed the Whiteline Diff Bushings, Eibach rear sway bar, clutch and flywheel, new rear main seal, driver side exhaust manifold, turbo is mounted on that side, fuel pump, fuel injectors, spark plugs, OEM intake manifold, TBs swapped, water lines deleted on the TBs, Boost controller and wideband gauge are mounted." :happydance:

He is hoping to get more done and the engine back in place next week. If you want to see picture of the progress, check it out on their Facebook site https://www.facebook.com/pages/Specialty-Z. It's just awesome knowing its going to happen anytime...boooooost!:p

Link doesn't work :confused:

TerribleONE 12-06-2013 08:18 PM

Quote:

Originally Posted by GaleForce (Post 2598499)
Link doesn't work :confused:

https://www.facebook.com/pages/Speci...2310?ref=br_tf

Fixed :tiphat:

GaleForce 12-06-2013 08:39 PM

Quote:

Originally Posted by TerribleONE (Post 2598505)

Yep. That's better. :tiphat:

cycy89 12-08-2013 11:24 PM

Tony, did you find a spot for a tow hook? It doesn't have to be factory, as long as there's a tow hook somewhere in the front.


All times are GMT -5. The time now is 09:48 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2