Nissan 370Z Forum
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Switchback racing Single kit. (http://www.the370z.com/forced-induction/134966-switchback-racing-single-kit.html)

Whjaxn17 10-13-2020 03:28 PM
Quote:
Originally Posted by Randomizer23 (Post 3965205)
Someone who I contacted on SOHO told me the stage 2 kit maxes out at 600whp. Im also worried that the spool times they have are not as good as the BP kit
So you got second hand information and fully intended to take that @ face value on a $10k decision? Glad you're ballin out like that.

George, as in George Sohoritis told me the stage 2 kit will make over 700whp on E85. Maybe you should actually call them and get details directly from the manufacturer.

Quote:
Originally Posted by Randomizer23 (Post 3965215)
My plan is to get all of my supporting mods to be able to support 800whp except for a built motor and run on stock block for a bit 500whp. Then slap in a built motor and turn up the boost.
What's the rest of that list look like?

Randomizer23 10-13-2020 03:54 PM
Quote:
Originally Posted by Elmo370z (Post 3965220)
Lol, I would recommend doing a lot more research on your part. Making power is easy with VQ’s, keeping them together is another question. Just head studs isn’t going to work at 800whp.
Yea I am going to get the motor fully built. What are some precautions that you think are important to make it hold together?

Randomizer23 10-13-2020 03:59 PM
Quote:
Originally Posted by Whjaxn17 (Post 3965222)
So you got second hand information and fully intended to take that @ face value on a $10k decision? Glad you're ballin out like that.

George, as in George Sohoritis told me the stage 2 kit will make over 700whp on E85. Maybe you should actually call them and get details directly from the manufacturer.



What's the rest of that list look like?
You are probably right I should do more research on the SOHO kit. I have been looking into the BP kit alot lately sorry!.

I will be getting a stage 4 clutch + flywheel from zspeed
CJM s1.se fuel return +their relay
AEM gauges
OS giken 1.5way LSD
id 1300cc injectors
still debating on 1 walbro 450 or 2 of them
and still deciding on flex fuel.
305/45/17 tire and 325/30/19 for street tires
BC coilovers
motordyne exhaust with art pipes
z1 oil cooler unless the bp kit comes with one.
still debating on engine and trans mounts.

JLarson 10-13-2020 04:54 PM
Quote:
Originally Posted by Randomizer23 (Post 3965236)
You are probably right I should do more research on the SOHO kit. I have been looking into the BP kit alot lately sorry!.

I will be getting a stage 4 clutch + flywheel from zspeed
CJM s1.se fuel return +their relay
AEM gauges
OS giken 1.5way LSD
id 1300cc injectors
still debating on 1 walbro 450 or 2 of them
and still deciding on flex fuel.
305/45/17 tire and 325/30/19 for street tires
BC coilovers
motordyne exhaust with art pipes
z1 oil cooler unless the bp kit comes with one.
still debating on engine and trans mounts.
Remember that if you go with some of the kits, the ART pipes won't be an option (BP for example). BP Turn Key kit does have an oil cooler, but I'd say go with Fast Intentions Oil Cooler. Good price, great quality components. I've had multiple small issues with the oil cooler from the turnkey kit leaking, and the fittings are not great quality.

NorthStyle 10-13-2020 05:23 PM
I can't think of any of the turbo kits that would allow the use of ART pipes other than a rear mounted one.

Randomizer23 10-13-2020 05:31 PM
Quote:
Originally Posted by JLarson (Post 3965243)
Remember that if you go with some of the kits, the ART pipes won't be an option (BP for example). BP Turn Key kit does have an oil cooler, but I'd say go with Fast Intentions Oil Cooler. Good price, great quality components. I've had multiple small issues with the oil cooler from the turnkey kit leaking, and the fittings are not great quality.
Thanks for the info about oil coolers.

Randomizer23 10-13-2020 05:31 PM
Quote:
Originally Posted by NorthStyle (Post 3965249)
I can't think of any of the turbo kits that would allow the use of ART pipes other than a rear mounted one.
I will probably end up selling them

Elmo370z 10-13-2020 05:51 PM
Quote:
Originally Posted by Randomizer23 (Post 3965233)
Yea I am going to get the motor fully built. What are some precautions that you think are important to make it hold together?
Either what soho is doing, copper Hg and o rings, or what mazworx has been doing, darton mid sleeves with fire rings, step decking the block, and a secret Hg they use.

Elmo370z 10-13-2020 05:52 PM
Quote:
Originally Posted by Randomizer23 (Post 3965236)
You are probably right I should do more research on the SOHO kit. I have been looking into the BP kit alot lately sorry!.

I will be getting a stage 4 clutch + flywheel from zspeed
CJM s1.se fuel return +their relay
AEM gauges
OS giken 1.5way LSD
id 1300cc injectors
still debating on 1 walbro 450 or 2 of them
and still deciding on flex fuel.
305/45/17 tire and 325/30/19 for street tires
BC coilovers
motordyne exhaust with art pipes
z1 oil cooler unless the bp kit comes with one.
still debating on engine and trans mounts.
With that you will eventually join the blown motor club at the power levels you want.

Randomizer23 10-13-2020 06:31 PM
Quote:
Originally Posted by Elmo370z (Post 3965254)
With that you will eventually join the blown motor club at the power levels you want.
Why?

Randomizer23 10-13-2020 06:34 PM
Quote:
Originally Posted by Elmo370z (Post 3965253)
Either what soho is doing, copper Hg and o rings, or what mazworx has been doing, darton mid sleeves with fire rings, step decking the block, and a secret Hg they use.
Mazworx's motors are 20k cad for me... Still debating on a local shop for 13k or mazworx

Elmo370z 10-13-2020 07:54 PM
Quote:
Originally Posted by Randomizer23 (Post 3965267)
Mazworx's motors are 20k cad for me... Still debating on a local shop for 13k or mazworx
Maxworx blocks aren’t 20k.

Elmo370z 10-13-2020 07:55 PM
Quote:
Originally Posted by Randomizer23 (Post 3965264)
Why?
Just l19 and 625 running big power still blows HG.

Spooler 10-13-2020 07:57 PM
Quote:
Originally Posted by Elmo370z (Post 3965282)
Maxworx blocks aren’t 20k.
He is in Canada. LOL conversion. That is what the CAD is.

Randomizer23 10-13-2020 08:00 PM
Quote:
Originally Posted by Elmo370z (Post 3965283)
Just l19 and 625 running big power still blows HG.
Now im confused... I stated earlier I am fully building the motor.


All times are GMT -5. The time now is 09:12 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2