Help - Nitrous Express Autolearn TPS WOT module not working
 

Hey Guys,

I have one of these fancy digital TPS modules from Nitrous Express that is used to sense WOT, and activate your nitrous system automatically.

Wiring diagram below:

Trying to find a 0-5 volt TPS signal source for input to the module, to program its range. I have had it connected to the yellow wire on the passenger side throttle body, with no luck. I have called NX twice, and they dont really seem to know where this white wire should go on a 370Z. Thier kit is for the GTR, which may be different? Note that it says ECU not TB.

I keep looking at the details in the FSM, and see two potientometers at the pass side throttle body (Bank 1). I cannot tell if terminal 30 wire 4 (yellow) is actually a TPS voltage output signal ?

This might help you out.
http://www.the370z.com/engine-drivet...gnal-wire.html

Thanks!

That is the thread actually helped me find tach signal wire from the ECU at 110!

It works perfectly on my window switch.

Now, I just need the real throttle position output signal.

Any ideas? Where is ArkZ?