Fast Intentions Stage 2 TT build by MA-Motorsports.

URBiN~HURMiT · 06-19-2020, 08:22 PM

Quote:

Originally Posted by GeauxTigers1

Hey!! This looks like a cool thread! Can I join?!

Hotrodz, happy to hear your build is moving forward!’ Finally got my clutch in and going to the shop for install 7/13!! Really curious though if anyone has heard about the ported AAM intake manifolds and if they perform better than how they come from AAM? Al Tomlinson (not sure his forum name) mentioned he was going that route and seeing what happens! Excited to hear the results but curious if you guys hear anything? I REALLY would rather install the thing if I can just get it to make even ZERO power. Lol anything but negative and I’d be happy.

I have one, You can spend your money better elsewhere ...

...

Hotrodz · 06-19-2020, 09:32 PM

Quote:

Originally Posted by blueranger

Did you already jump my build lol.

Ha ha, maybe! My motor is done!

Sent from my SM-G965U using Tapatalk

Rusty · 06-19-2020, 09:37 PM

Quote:

Originally Posted by Hotrodz

Ha ha, maybe! My motor is done!

Sent from my SM-G965U using Tapatalk

When is it going into the car?

GeauxTigers1 · 06-19-2020, 11:37 PM

Quote:

Originally Posted by URBiN~HURMiT

I have one, You can spend your money better elsewhere ...

...

Ported?! I have the intake manifold already and don’t know if I want to sell it for a loss or port it and slap that baby on

GeauxTigers1 · 06-19-2020, 11:38 PM

Quote:

Originally Posted by Hotrodz

Ha ha, maybe! My motor is done!

Sent from my SM-G965U using Tapatalk

Yaaaaas Dude!’ This time you’re up and running, I’m making a trip up for you dude!

Hotrodz · 06-20-2020, 09:41 AM

Quote:

Originally Posted by Rusty

When is it going into the car?

I will take to him some time in early July.

Sent from my SM-G965U using Tapatalk

blueranger · 06-23-2020, 10:27 PM

Quote:

Originally Posted by GeauxTigers1

What are you in the shop for?? You building for more power?

Yes... At Specialty Z getting custom F.I. turbos and built block. Would have been done but I keep asking for more "work"

solidus · 06-25-2020, 11:40 AM

Quote:

Originally Posted by GeauxTigers1

Ported?! I have the intake manifold already and don’t know if I want to sell it for a loss or port it and slap that baby on

Hold your horses. I got that bastard on last night. The two rear bolts beat my ***. I gave up on trying to torque them and just used ugga dugga increments with a shorty ratchet.
I'm of the same train of thought as you though. Very few people have actually pressurized the system and listened to the uncomfortable sound of the manifold creaking and cracking. Once you do you can't unhear it. If I get a net gain of zero at least I know beyond a shadow of a doubt there's not a chance in hell my manifold is gonna pop open.
Seb told me to give him a WOT log to see what it's doing and we'll go from there. My guess is , It'll take some more timing and fuel.

Elmo370z · 06-25-2020, 05:16 PM

Quote:

Originally Posted by solidus

Hold your horses. I got that bastard on last night. The two rear bolts beat my ***. I gave up on trying to torque them and just used ugga dugga increments with a shorty ratchet.
I'm of the same train of thought as you though. Very few people have actually pressurized the system and listened to the uncomfortable sound of the manifold creaking and cracking. Once you do you can't unhear it. If I get a net gain of zero at least I know beyond a shadow of a doubt there's not a chance in hell my manifold is gonna pop open.
Seb told me to give him a WOT log to see what it's doing and we'll go from there. My guess is , It'll take some more timing and fuel.

Hurry up

GeauxTigers1 · 06-25-2020, 08:21 PM

Quote:

Originally Posted by Elmo370z

Hurry up

Hahaha! Exactly! I wanna know damnitt!

Spooler · 06-26-2020, 12:03 AM

Quote:

Originally Posted by GeauxTigers1

Hey!! This looks like a cool thread! Can I join?!

Hotrodz, happy to hear your build is moving forward!’ Finally got my clutch in and going to the shop for install 7/13!! Really curious though if anyone has heard about the ported AAM intake manifolds and if they perform better than how they come from AAM? Al Tomlinson (not sure his forum name) mentioned he was going that route and seeing what happens! Excited to hear the results but curious if you guys hear anything? I REALLY would rather install the thing if I can just get it to make even ZERO power. Lol anything but negative and I’d be happy.

I hope you like the clutch. I sure do. Easy to get it in the trailer also because you can slip it a little bit.

Spooler · 06-26-2020, 12:04 AM

Quote:

Originally Posted by solidus

Hold your horses. I got that bastard on last night. The two rear bolts beat my ***. I gave up on trying to torque them and just used ugga dugga increments with a shorty ratchet.
I'm of the same train of thought as you though. Very few people have actually pressurized the system and listened to the uncomfortable sound of the manifold creaking and cracking. Once you do you can't unhear it. If I get a net gain of zero at least I know beyond a shadow of a doubt there's not a chance in hell my manifold is gonna pop open.
Seb told me to give him a WOT log to see what it's doing and we'll go from there. My guess is , It'll take some more timing and fuel.

Should we prepare for the head gasket funeral????

Spooler · 06-26-2020, 12:06 AM

I am waiting on one stupid part. Metal cam timing cover gasket. Parts coming from Japan/Nissan is a nightmare at the moment.

GeauxTigers1 · 06-28-2020, 11:26 PM

Quote:

Originally Posted by Spooler

Should we prepare for the head gasket funeral????

You watch your mouth sir!!

Spooler · 06-29-2020, 11:05 AM

Quote:

Originally Posted by GeauxTigers1

You watch your mouth sir!!

LOL, everybody needs the experience of coolant hitting the windshield at WOT.
WTF????? Ah crap, stomach up in the throat. No fun.

06-26-2020, 12:06 AM	#2443 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,504 Drives: 2013 Nismo 370z Rep Power: 2684391	I am waiting on one stupid part. Metal cam timing cover gasket. Parts coming from Japan/Nissan is a nightmare at the moment. JARblue, Hotrodz, Ghostvette and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM