Nitrous help
 

I'm planning a nitrous install over the winter, I've had nitrous on bikes and cars since the early 90's but only ever wet kits but i have a decent basic knowledge

Currently looking at a few options, the NX plate system, regular foggers in the intake hoses, regular foggers in the plenum and possibly a dry system

I have managed to get hold of a spare plenum which I am going to "clean up" to improve the flow a little and I noticed that there are some good locations for nitrous injectors

Now usually you need to put the fogger in the intake hose to guard against backfires but since the VQ engine has open throttle bodies all the time (So i have read) I am not sure this is an issue

Can anyone help or perhaps suggest a decent forum for nitrous questions?

Many thanks

Most everyone here has ran either the Zex or Nitrous Express Wet system. To my knowledge, no one has pushed past 100hp shot. Here are a few items to read up on:

http://www.the370z.com/forced-induct...-finished.html

http://www.the370z.com/forced-induct...s-install.html

http://www.the370z.com/diy-section-d...stalltion.html

http://www.the370z.com/tuning/105045...itrous-me.html

There are a few more...

Thanks my first step was to use the search function but as you say i didnt find anyone who had used a dry kit or placed the foggers in the plenum

Place them in the lower plenum. It can be drilled and tapped due to being metal.