Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   STS Systems (http://www.the370z.com/forced-induction/10815-sts-systems.html)

Cell 09-25-2011 01:08 PM

Quote:

Originally Posted by dnasty370z (Post 1328568)
Dammmmmm what a let down i too have a 7at and liked this kit cause I thought it would probably be the safest route to go with the auto tranny :eek: hope they do make it work

What do you mean by safest? If you are talking about engine longevity then you will find that the kit itself makes the least difference and the tune makes the most difference.

Jamaica 09-25-2011 02:16 PM

STS will work with the auto transmission. Should have an update later this week

dnasty370z 09-25-2011 04:16 PM

Quote:

Originally Posted by Cell (Post 1328655)
What do you mean by safest? If you are talking about engine longevity then you will find that the kit itself makes the least difference and the tune makes the most difference.

What I like alot about the kit is with the turbo being at the rear of the car there is not too much extra heat being produced in the engine bay like a traditional turbo set up

tower74 10-16-2011 11:08 AM

Quote:

Originally Posted by Jamaica@UAMotorsports (Post 1328706)
STS will work with the auto transmission. Should have an update later this week

Mine will be finished Monday or Tuesday of this week for a AT7 tranny. It took a little fabbing by the guys at Executive Performance in Meriam,Ks but looks great and as far as I know it will be the very first. I've driven manuals my whole life and other than a little lag between shifts it acts just like a manual. On top of that you can't out shift a computer. Once the methanol injection is complete it's off to the dyno. I hoping for something around 470 and up at 8psi.

1slow370 10-17-2011 01:05 AM

an undertray would be a good idea, one of my guys had to have his exhaust housing welded it was starting to split

Chinook 10-18-2011 07:34 PM

Quote:

Originally Posted by tower74 (Post 1361231)
Mine will be finished Monday or Tuesday of this week for a AT7 tranny. It took a little fabbing by the guys at Executive Performance in Meriam,Ks but looks great and as far as I know it will be the very first. I've driven manuals my whole life and other than a little lag between shifts it acts just like a manual. On top of that you can't out shift a computer. Once the methanol injection is complete it's off to the dyno. I hoping for something around 470 and up at 8psi.

Which methanol injection system have you decided to go with and have you had any experience with it in the past?

tower74 10-19-2011 11:04 PM

Still waiting
 
Quote:

Originally Posted by Chinook (Post 1365724)
Which methanol injection system have you decided to go with and have you had any experience with it in the past?

It's the methanol with boost controller kit that STS sells and no this will be my first. I was a Ford Mustang man my whole life until a year ago I bought my first 350z. I must say this has been the worst 6 month project of my life. I know and understand STS has never done one and when their own guy says it should of not be realeased yet, it makes me worry. They have done everthing to fix the missing pieces, wrong pieces, etc but first dyno we could only pull 390.37hp with 340.77lbs torque. Hell at 5psi it was only 322.22hp with 273.65 torque. Oh did I mention they sent the wrong sprayers for the methanol injection and sent a 2 gallon jug. Now where in the hell is a 2 gallon jug gonna go in a 370?? Next Monday it's going back in again. Project started in June....

Chinook 10-22-2011 12:21 PM

Quote:

Originally Posted by tower74 (Post 1367946)
It's the methanol with boost controller kit that STS sells and no this will be my first. I was a Ford Mustang man my whole life until a year ago I bought my first 350z. I must say this has been the worst 6 month project of my life. I know and understand STS has never done one and when their own guy says it should of not be realeased yet, it makes me worry. They have done everthing to fix the missing pieces, wrong pieces, etc but first dyno we could only pull 390.37hp with 340.77lbs torque. Hell at 5psi it was only 322.22hp with 273.65 torque. Oh did I mention they sent the wrong sprayers for the methanol injection and sent a 2 gallon jug. Now where in the hell is a 2 gallon jug gonna go in a 370?? Next Monday it's going back in again. Project started in June....

Sorry to hear that you've had problems. I also got very close numbers to you around 415hp 365lb torque at 7.5 psi I am hoping to add methanol injection and bump up the boost in spring. I don't think i'm gonna go with their kit though and I was thinking of building a custom tank in the trunk because as you mentioned there just isn't much room in our car for any of the pre-made tanks. I had recieved a dyno chart from sts with higher initial numbers but then i added a resonator it seems to have dropped the numbers a bit. Are you running a resonator on your setup? And do you have hfc's or test pipes? I hope you get your problems resolved quickly, I am curious as to whether you feel the methanol injection is worth it.

Glokwork 10-22-2011 04:33 PM

Quote:

Originally Posted by Chinook (Post 1371766)
Sorry to hear that you've had problems. I also got very close numbers to you around 415hp 365lb torque at 7.5 psi I am hoping to add methanol injection and bump up the boost in spring. I don't think i'm gonna go with their kit though and I was thinking of building a custom tank in the trunk because as you mentioned there just isn't much room in our car for any of the pre-made tanks. I had recieved a dyno chart from sts with higher initial numbers but then i added a resonator it seems to have dropped the numbers a bit. Are you running a resonator on your setup? And do you have hfc's or test pipes? I hope you get your problems resolved quickly, I am curious as to whether you feel the methanol injection is worth it.

Is that the highest numbers you've seen and which dyno? On the sts site it says it's good for 470whp @ 7psi

Lug 10-22-2011 10:18 PM

Quote:

Originally Posted by Glokwork (Post 1371982)
Is that the highest numbers you've seen and which dyno? On the sts site it says it's good for 470whp @ 7psi

The site is quoting estimated Brake HP, not Wheel HP. So 470 - 15% drivetrain loss = around 400 Whp.

tower74 10-22-2011 11:51 PM

Quote:

Originally Posted by Chinook (Post 1371766)
Sorry to hear that you've had problems. I also got very close numbers to you around 415hp 365lb torque at 7.5 psi I am hoping to add methanol injection and bump up the boost in spring. I don't think i'm gonna go with their kit though and I was thinking of building a custom tank in the trunk because as you mentioned there just isn't much room in our car for any of the pre-made tanks. I had recieved a dyno chart from sts with higher initial numbers but then i added a resonator it seems to have dropped the numbers a bit. Are you running a resonator on your setup? And do you have hfc's or test pipes? I hope you get your problems resolved quickly, I am curious as to whether you feel the methanol injection is worth it.

Rick had sent me your dyno sheet while mine was being installed and I seen max was 456.8hp or he sent me someones elses but said it was from the first one they had done and it was rolling around in Canada.
Was told they talked to the guys with STS and they said there should be no problems hitting the 450-470 range, but yet again I'm the guinea pig. They have never installed a methanol injection system on a 370z. I was told the spayers they sent were for a V-8 so they sent a pair since it needs to hit both side of the engine. I'm hoping that by tuesday I will have the final numbers. So far $11,000 for 92hp...damn I got screwed

Cell 10-23-2011 12:14 AM

Quote:

Originally Posted by tower74 (Post 1372371)
Rick had sent me your dyno sheet while mine was being installed and I seen max was 456.8hp or he sent me someones elses but said it was from the first one they had done and it was rolling around in Canada.
Was told they talked to the guys with STS and they said there should be no problems hitting the 450-470 range, but yet again I'm the guinea pig. They have never installed a methanol injection system on a 370z. I was told the spayers they sent were for a V-8 so they sent a pair since it needs to hit both side of the engine. I'm hoping that by tuesday I will have the final numbers. So far $11,000 for 92hp...damn I got screwed

You mean 192 hp?

Chinook 10-23-2011 11:30 AM

Quote:

Originally Posted by tower74 (Post 1372371)
Rick had sent me your dyno sheet while mine was being installed and I seen max was 456.8hp or he sent me someones elses but said it was from the first one they had done and it was rolling around in Canada.
Was told they talked to the guys with STS and they said there should be no problems hitting the 450-470 range, but yet again I'm the guinea pig. They have never installed a methanol injection system on a 370z. I was told the spayers they sent were for a V-8 so they sent a pair since it needs to hit both side of the engine. I'm hoping that by tuesday I will have the final numbers. So far $11,000 for 92hp...damn I got screwed

Yeah that was my dyno sheet before I had the resonator installed, wow that's a lot of coin, is a lot of that install costs? I sincerely hope that your end results are worth it. I was supposed to get their methanol kit when they were installing my turbo but paths got crossed and it didn't happen, by the sounds of it maybe it's a good thing. I have all the parts for the snow performance methanol kit I just have to make a tank for the trunk. Who is doing your install? And where are they mounting your tank?

Chinook 10-23-2011 11:37 AM

Quote:

Originally Posted by tower74 (Post 1372371)
Rick had sent me your dyno sheet while mine was being installed and I seen max was 456.8hp or he sent me someones elses but said it was from the first one they had done and it was rolling around in Canada.
Was told they talked to the guys with STS and they said there should be no problems hitting the 450-470 range, but yet again I'm the guinea pig. They have never installed a methanol injection system on a 370z. I was told the spayers they sent were for a V-8 so they sent a pair since it needs to hit both side of the engine. I'm hoping that by tuesday I will have the final numbers. So far $11,000 for 92hp...damn I got screwed

Also I'm pretty sure the dyno numbers he sent you had been corrected to sea level, I don't know what elevation your at but that can be a bit misleading as well. How much boost are you planning to run when the metabolism injection gets installed?

Glokwork 10-23-2011 02:49 PM

Quote:

Originally Posted by Lug (Post 1372261)
The site is quoting estimated Brake HP, not Wheel HP. So 470 - 15% drivetrain loss = around 400 Whp.

No, the site clearly says whp...

"A combination of our patented remote-mount technology combined with an intercooler provides the lowest consistent air intake temperatures over any other forced induction system on the market. Owners of otherwise stock vehicles will experience 470whp @ 7 pounds of boost, but also receive the benefit of increased fuel economy over the competition. The beautifully tuned exhaust note from an STS Remote-Mount Turbo System is sure to put a grin on your face as you flyby all those other imports."


All times are GMT -5. The time now is 05:06 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2