http://s1305.photobucket.com/user/Be...p.jpg.html?o=0

http://s1305.photobucket.com/user/Be...z.jpg.html?o=1

http://i1305.photobucket.com/albums/...psjuloqwwp.jpg

http://i1305.photobucket.com/albums/...pspgosn8wz.jpg

Good job ct.

Just want to share. The small shelf people talk about is really not noticeable at all.

[IMG]https://farm2.staticflickr.com/1444/...274ba701_b.jpgDSC_4279 by Raf, on Flickr[/IMG]

All this **** weather is not allowing me to finish my bumper :mad:

Where do you guys buy the new nismo front bumper?

Z1

Having had a play with the EVO-R DRL I started making some lenses.

http://imgur.com/dX7pbbv.jpg
http://imgur.com/zRfEmcY.jpg

I sanded them down and primed them to get rid of the manufacturing injection mould marks but ultimately decided they weren't quite for me.

I have treated myself to a pair of these - and a much lighter wallet.

http://imgur.com/YA4UKrG.jpg
http://imgur.com/N7flthe.jpg

Just waiting for the rear to come back from paint next week and i'll install the rear and put the DRL in. That will take some wiring via relay to get them working using the auto lights feature. Plan is to have them on with the ignition and off when the main lights come on automatically.

http://i.imgur.com/C42uHgc.jpg

I also have these ready to go on.

http://imgur.com/bIA3HrN.jpg

Are those oem nismo DRL's?

Photo's 3 & 4 are, yes.

Ugh....the nismo DRLs look so much better than anything else on the market but don't know if I can justify paying so damn much for a set

Fitted the DRL this weekend. pretty straightforward to be honest longest part was running the wiring which was pretty simple.

There is no harness to fit and DRL on the 2012 370 so had to wire them in manually.

I worked out a circuit using a normally closed relay. Power from a 12v source when then ignition is ON will activate the DRL, they will remain on until either the sidelights or main beam are turned on. This also works in the auto position.

http://imgur.com/g0ikUg4.jpg

Testing the circuit.



All was good so onto the physical part....

Removed the bumper.

http://i.imgur.com/fR0Vq48.jpg

These are the location points for the Nismo DRL. 2 x push clips and 1 x spring clip.

The yellow circled portion is from one of the plastic inserts for the Nismo bumper that acts as a guide.

http://imgur.com/s5Tvj6e.jpg

DRL Fitted

http://imgur.com/Gk21Rps.jpg
http://imgur.com/Gd7PSWQ.jpg

I didnt take any pictures of the actual wiring install (boring) but the 12v feed for the ignition on was taken from the fise box in the engine bay and the pin circled in red.

12v to trigger the relax and switch off the DRL when the main beam or side lights come on was taken from the side lights. There are two wires black/yellow and green. The green wire is the 12v.

http://i.imgur.com/qiWWe4A.jpg

The final result showing the DRL on and off with the side lights and/or main beam on.

http://imgur.com/U24qEQ2.jpg
http://imgur.com/z1eTNHn.jpg