Originally Posted by Hatsuongmai (Post 3364944)

Cool...I wish someone make a blank insert for this. It should be cheap to make.

Originally Posted by imjello (Post 3403352)

https://www.z1motorsports.com/front-...ia-p-8766.html

i just saw this on sponsor site, super cheap fix :)

Originally Posted by HngNgn19 (Post 3403705)

I done the conversion and I believe that piece from the link is actually a vertical molding that goes right next to the DTRL and not cover the DTRL hole itself. I may be wrong but... I'm pretty sure of what it is.

Originally Posted by zefaulter (Post 3334521)

Something like this


<br />
<br />
I was double checking my invoices and noticed the part #'s look different compared to that picture. Here's what I have.<br />
<br />
FBM22-6GA0H Front bumper<br />
62087-6GA0A MOULDING Red insert<br />
62086-6GA0A MOULDING Red insert<br />
62077-6GA0A MOULDING Vertical insert<br />
62076-6GA0A MOULDING Vertical insert<br />
62064-6GA0B PROTECTOR Fender liner filler<br />
62064-6GA0A PROTECTOR Fender liner filler<br />
<br />
Anyone else that has ordered these parts that verify the part #'s also?

Originally Posted by GordoNx3o9 (Post 3404053)

Can anyone explain to me if the LAST 2 parts are necessary?

62064-6GA0B PROTECTOR Fender liner filler
62064-6GA0A PROTECTOR Fender liner filler

From the diagram I can't tell what is it. Thanks!

Originally Posted by HngNgn19 (Post 3404131)

This the protector Fender liner filler, however, Do Not buy them if you do not plan on buying the fender linings and the undertray as well. They will do you no good wih the non-nismo Fender lining.
http://www.the370z.com/members/hngng...-481848432.jpg

Originally Posted by Bakseedaa (Post 3403260)

I have seen that some people with the standard exhaust have the exhaust tips shy of sticking out of the Nismo bumper. Is this the same with aftermarket exhausts. I have the HKS SSM exhaust which I won't change but I would like to put the 2015 Nismo bumper on my 40th ?

Originally Posted by Bakseedaa (Post 3403260)

I have seen that some people with the standard exhaust have the exhaust tips shy of sticking out of the Nismo bumper. Is this the same with aftermarket exhausts. I have the HKS SSM exhaust which I won't change but I would like to put the 2015 Nismo bumper on my 40th ?