Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   2015 Nismo Bumper on 2009 Sport possible? (http://www.the370z.com/exterior-interior/95060-2015-nismo-bumper-2009-sport-possible.html)

aszyd 09-20-2014 08:19 PM

Quote:

Originally Posted by martin82 (Post 2973015)
If there is interest I might look into doing brake ducts off the DRL location thoughts?

After selling the DRLs from my 2013 bumper, I started looking into DIY ducting solutions.

Home Depot has these register boxes that should fit the 2015 DRL holes pretty well, which are 12"x2". I was going to do CAI ducts, hence the 90°. I think it will fit the left side, but the right side, with the washer reservoir, I am not so sure. Spray them in black and add some steel mesh and it would look good. Obviously, some type of flexible pipe will be needed as well.
http://www.homedepot.com/catalog/pro...dfdf52_400.jpg

Quote:

Originally Posted by Asheth (Post 2973088)
Hmm so new fenders then just figure out the drl's. Seems like easy setup. Martin and aszyd was the fender liners apart of the package you guys ordered?

Nope. Z1 was not sure what else would be needed to make it fit, so I just ordered the fascia and red trim, hoping that the rest of the OEM stuff would line up. The MSRP on OEM fender liners is around $80 and they can be found for $40 from other manufacturers. Hopefully the new ones will be similarly priced. I check the Nissan's parts site frequently and the new Nismo stuff has not posted yet. Gotta be a dealer I suppose.

Asheth 09-20-2014 08:25 PM

Thanks for the info

Prototyper5 09-21-2014 09:46 PM

Quote:

Originally Posted by Jordo! (Post 2968142)
Any chance you might make some FRP ones

EDIT: Canard type inserts is a great idea!

I could but the factory ones would probably be better for the price, that's the only reason I suggested carbon, but making a DRL insert like a vent or canard would work too.

~Reagan

martin82 09-22-2014 06:03 PM

front and rear bumper says it will arrive today, the front finisher red pieces came in earlier today.

lesper4 09-22-2014 06:38 PM

OK, I sent a message to the guy if he wants to come to you or vice versa so he can take a look at the bumper and she what the work entails. I already sent him the close up shots.

370z209 09-22-2014 06:51 PM

Are there vertical inserts that also need to be purchased that go under the DRL's on the front bumper? Separate from the red inserts.

aszyd 09-22-2014 06:56 PM

Quote:

Originally Posted by 370z209 (Post 2974883)
Are there vertical inserts that also need to be purchased that go under the DRL's on the front bumper? Separate from the red inserts.

Yes. I'm going to order mine from Juan@Fontana.

martin82 09-22-2014 07:24 PM

lesper thanks lmk what they say, if it takes too long i'll just cut up my bumper and someone else can try to do the DRL.

370z209 09-22-2014 08:21 PM

Quote:

Originally Posted by aszyd (Post 2974888)
Yes. I'm going to order mine from Juan@Fontana.

Thx was there a price quote for those parts yet. Already ordered the bumper and red inserts

lesper4 09-23-2014 03:42 PM

Martin, did you get your bumper in yet?

martin82 09-23-2014 04:38 PM

bumper is at the shop, I texted ur buddy and my friend andrew is on it. I am just not sure how much of a time table I have for your guy, got some track competitions coming up on Oct 2nd.

KaienZ34 09-23-2014 04:51 PM

I SOOoooooo hope you guys can get this done.

lesper4 09-23-2014 04:52 PM

I guess the question is, if they can make something, do you need it by the second...isn't this the end of the season?
We will find out soon enough if something can be worked out.

DEpointfive0 09-23-2014 05:00 PM

Quote:

Originally Posted by lesper4 (Post 2975940)
Martin, did you get your bumper in yet?

Quote:

Originally Posted by martin82 (Post 2975977)
bumper is at the shop, I texted ur buddy and my friend andrew is on it. I am just not sure how much of a time table I have for your guy, got some track competitions coming up on Oct 2nd.

Quote:

Originally Posted by lesper4 (Post 2975989)
I guess the question is, if they can make something, do you need it by the second...isn't this the end of the season?
We will find out soon enough if something can be worked out.

Lesper, I'm gonna shoot you a text in a min

chops 09-23-2014 11:34 PM

Quote:

Originally Posted by lesper4 (Post 2975989)
I guess the question is, if they can make something, do you need it by the second...isn't this the end of the season?
We will find out soon enough if something can be worked out.

its the beginning of the season for Z's. summer = overheating. LOL


All times are GMT -5. The time now is 08:59 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2