Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Annoying Shifter Rattle (http://www.the370z.com/exterior-interior/81603-annoying-shifter-rattle.html)

Elan 11-04-2013 03:50 AM

Annoying Shifter Rattle
 
Hello everyone! Well I've had this problem since I picked up the car and now that I can't play music for a week or so, its really getting to me. My shifter has an extremely annoying rattle/buzz (more of a buzz) coming from the top of it. It sounds like plastic rattling around. It happens over 2.5K RPMS, so during cruise it is constant. When I push down on the shifter head (push with a finger on the 123456R pattern, not the whole shifter assembly), even very lightly, it stops.

I tried searching for a fix, but it seems people only experience the whole unit rattling. Mine seems to be coming from the top only. Anyone know what is causing this problem and how to fix it? It's driving me absolutely crazy. :icon14:

dc3843 11-04-2013 06:38 AM

I have that problem with mine too. I just bought a weighted shifter and got rid of the stock one. Sorry, that's probably not much help

Troyz 11-04-2013 08:40 AM

Rattle
 
I test drove a few 370z before I figured out it was a common problem. It only seems to happen at high RPM.

kenchan 11-04-2013 09:05 AM

it could be the metal spacer that sits right under the knob. its got a bevel on the inside to mate with the tapered part of the shaft.

if you can remove the knob, then i would put a washer (or maybe even a rubber grommet) on top of that spacer and re-tighten your knob. that might take care of it.

the stock knob and be a royal pita to remove... :ugh:

onzedge 11-04-2013 09:35 AM

Quote:

Originally Posted by kenchan (Post 2554386)
it could be the metal spacer that sits right under the knob. its got a bevel on the inside to mate with the tapered part of the shaft.

if you can remove the knob, then i would put a washer (or maybe even a rubber grommet) on top of that spacer and re-tighten your knob. that might take care of it.

the stock knob and be a royal pita to remove... :ugh:

I had the same problem and a rubber grommet (I used a couple of garden hose washers) took away the rattle totally.

Mt Tam I am 11-04-2013 09:44 AM

Quote:

Originally Posted by onzedge (Post 2554419)
I had the same problem and a rubber grommet (I used a couple of garden hose washers) took away the rattle totally.

Cool beans.

kenchan 11-04-2013 09:47 AM

yet another home depot mod! :tup: :ugh: :icon17:

onzedge 11-04-2013 09:52 AM

Quote:

Originally Posted by kenchan (Post 2554444)
yet another home depot mod! :tup: :ugh: :icon17:

:tup:

It worked!!!

onzedge 11-04-2013 09:52 AM

Quote:

Originally Posted by Mt Tam I am (Post 2554438)
Cool beans.

:tup:

Elan 11-04-2013 01:08 PM

Quote:

Originally Posted by kenchan (Post 2554386)
it could be the metal spacer that sits right under the knob. its got a bevel on the inside to mate with the tapered part of the shaft.

if you can remove the knob, then i would put a washer (or maybe even a rubber grommet) on top of that spacer and re-tighten your knob. that might take care of it.

the stock knob and be a royal pita to remove... :ugh:

But the interesting part is that it doesn't rattle down there. It only happens at the very top of the shifter. When I push down slightly on the flexible leather top, it stops. I don't even touch the shifter assembly. I don't understand how a metal spacer at the bottom affects the very top of the shifter where the rattle comes from. I'm going crazy kenchan. The men in white will come soon. I know it. :eekdance:

kenchan 11-04-2013 01:13 PM

Quote:

Originally Posted by Elan (Post 2554766)
But the interesting part is that it doesn't rattle down there. It only happens at the very top of the shifter. When I push down slightly on the flexible leather top, it stops. I don't even touch the shifter assembly. I don't understand how a metal spacer at the bottom affects the very top of the shifter where the rattle comes from. I'm going crazy kenchan. The men in white will come soon. I know it. :eekdance:

i think it's just resonating on the shaft and it just sounds like it's coming from the top?

have you tried removing the knob? that would be your first step. :D try adding the grommet.

Fountainhead 11-04-2013 01:29 PM

Well you know that the stock knob is a multi-piece affair, perhaps something internally is vibrating...

kenchan 11-04-2013 01:32 PM

remove the knob yet? :facepalm:

Elan 11-04-2013 02:46 PM

Quote:

Originally Posted by kenchan (Post 2554798)
remove the knob yet? :facepalm:

No I didn't. I know its a PITA! I will this weekend when I have access to some tools. :icon14:

kenchan 11-04-2013 02:58 PM

i broke 2 strap wrenches trying to take mine off yrs ago. :ugh:


All times are GMT -5. The time now is 02:28 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2