Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Someone hit my car (http://www.the370z.com/exterior-interior/74599-someone-hit-my-car.html)

Grindkiezer 08-06-2013 08:40 PM

Quote:

Originally Posted by gSwift (Post 2435356)
I've heard of people getting extra money out of insurance companies for depreciation after an accident. You should at least check into it.

Having the other party's insurance company give me a lump some of $2,600 and getting a deal from the autobody shop for $1900 but $700 still needed to order aftermarket fenders, I was hoping that if the shop had ordered the parts for me that the insurance company could cover the $100-200 difference. I know that it isn't much but I mean why not? For my trauma and suffering ;) But I was told that the insurance company would only cover stock parts :shakes head: Anyone know if that's true? But like I said it doesn't really matter cause she'll be back soon enough :tup:

Chuck33079 08-06-2013 08:46 PM

It's called diminished value. Worth asking about.

gSwift 08-06-2013 09:33 PM

Quote:

Originally Posted by Chuck33079 (Post 2435380)
It's called diminished value. Worth asking about.

^^ This!

Ghostvette 08-21-2013 03:44 PM

Quote:

Originally Posted by Chuck33079 (Post 2435380)
It's called diminished value. Worth asking about.

It will kind of depend on the state. In Kansas, there is a requirement that the owner must be 'made whole'. That usually means that the car must be repaired to like new and the owner paid for decreased value of the vehicle. Talk to the insurance commissioner's office to get the straight scoop.

axmea? 08-21-2013 05:14 PM

So is your car fixed with the AeroJacket fender?

Grindkiezer 08-21-2013 05:55 PM

Update: Finally got my fenders from AeroJacket today. It took almost 2 weeks just to be shipped and arrive in San Diego. Why so long?? My questions exactly. I got a call from the shipping company that said that they got the shipment but would not be able to deliver it until tomorrow. Fûck that Shît. So I drove down to San Diego and picked the parts up myself so that I could hurry up and get the ball rolling on this repair since I go back to school on Monday and would like my car sooner than later. I took the parts and my car to the shop where I am going to get the repair done and dropped it off to "start" the process. I was feeling hopeful until about 10 minutes ago when the shop owner/my buddy called to inform me that these fenders are shît and that they have no lines to them and that I should look into getting a different pair. But he knows how long it took just to get these so he said if I wanted I could just have them try and "fix" the fenders I brought in.

And that's where I am right now, I told them that since the parts came out of a mold that another pair would be the same. I'm not going to deal with Aero Jacket nor complain because it's not worth my time. I've waited longer for the parts then I thought could be humanly possible especially when they're located a little North of me. So with any luck I'll have my car back next month :tup: (Not) :shakes head: Because of the poor quality of these fenders it's gonna take a lot of time and a lot more money to get them to where they need to be.

I'll keep you guys updated. Thanks

axmea? 08-21-2013 06:55 PM

They build it after it is ordered. Faster if you pick it up in Gardena. Sorry to hear about the wait.

Grindkiezer 08-21-2013 07:32 PM

I know that they're made to order, that wasn't the problem. They came "out of the mold" about 4 days after I ordered them, but then sat wrapped and ready to ship in their office for over a week because the shipping company hadn't picked it up yet. When I finally contacted them about picking it up, it was already in route. Axmea did you have a lot of fitment issue and also idk if you saw my comment but where did you get those vents in the fenders?

axmea? 08-21-2013 07:58 PM

Fitment of the fenders was spot on. No odd gaps or lines. I heard from some that aftermarket fenders aren't consistent and require pro shops to tweak and mod to fit. Sorry about your experience.

Grindkiezer 09-01-2013 03:46 PM

And....she's back!
 
Finally after about a month I got my car back a couple days ago :tup:
A few issues throughout the whole ordeal but in the end I'm happy :)

These fenders didn't have the mesh molded to the bumped and so I had bought the mesh myself and was planning to drop it off at the body shop so that they could paint it and mold it in for me. But between school, work, and always driving a different car I would never have the time to drop it off so when I got the phone call saying that my car was finished and that the fenders were already on the car so they wouldn't be able to put the mesh on for me I thought I was SOL. But I finished installing them myself this morning (which sucked) by squeezing though the wheel well lined and trying to shape and attach it. So here she is :tiphat:



http://i821.photobucket.com/albums/z...ps3d7dab21.jpg
http://i821.photobucket.com/albums/z...psff518e38.jpg

axmea? 09-01-2013 06:19 PM

Glad you have it back. Car looks good!

Limeybastard 08-16-2014 04:48 PM

Quote:

Originally Posted by 6spd (Post 2434755)
You'll take a big hit on trade in value in the future with an accident on your carfax.

FWIW, if you report an accident and a police report is filed, even if you don't file an insurance claim, it still shows up on carfax. Found that out the hard way this past weekend......

Thats not what I heard. I was told by a bodyshop the insurance company once a claim is made reports / sells that information to Carfax. They randomly get that information from the insurance firm. My wife's previous car had 2 accidents, only one showed on the Carfax. The same bodyshop was used for both incidents.

To OP, you finished car looks amazing, well done.

cooltoy 08-16-2014 07:19 PM

:icon08:


All times are GMT -5. The time now is 03:39 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2