what clear bra are you using?
 

planning to get clear bra the next week or so. just wondering what you guys are using and or would recommend?

im using a scotch roll 6" width down along the side rockers. bought it from amazon.

works great to prevent kickup knicks

I'm pretty sure mine is the Ventura shield and I still have issues on the headlights. It's a thicker one and they just can't keep it stuck around the bubble in the headlight. They are going to try one of the thinner films on the headlights to see if it will stay put.

I'm a boy, i don't wear bras.

JK

Gotta get one soon. Heard its well worth the $$

I believe this is what was used on mine:

SunTek Top Coat.

However, it does have to be stretched quite a bit on the front bumper and I have a small triangle that's come up from the bumper. Had the guy cut it once and it came up again, I'm afraid to keep trimming it, fearing it will need to be redone.


Also, it was penetrated by a sharp rock. :thumbsdown:

This is the first clear bra I have used, so I'm not sure if that's the norm. It's done pretty well otherwise. I can see marks where it's been hit hard too, but wasn't penetrated.

lol.. what luck i have, after posting this on the way home from work some douche bag ran over a piece of plastic of some sort and that thing flew straight to my bumper. my FK'IN bumper have a pretty nasty scrap now.. will have to find someone to touch up my bumper now :*{

XPEL. Been on 2 years with no problems.

I use a coat of Klasse All-In-One acrylic wax and stay as far away from the rearend of traffic ahead of me as particle. Saves me at least $500.00 and chipped paint.

I use 3m Scotchgard so far so good saved me from many rock chips and scratches.

3M Venture shield - Front bumper, full hood, side fenders and rearview mirrors