Disabling Windows

Projects · 11-30-2012, 01:49 PM

I recently got my car tinted and it looks fantastic but the windows keep screwing with my tint while its drying. Does anyone know if there is a fuse or a way I can disable the windows entirely or just disable the little 1/8" it goes down when you open the door to allow my tint to dry better?

Thanks!

Jeremy

nepali · 11-30-2012, 01:53 PM

Quote:

Originally Posted by Projects

I recently got my car tinted and it looks fantastic but the windows keep screwing with my tint while its drying. Does anyone know if there is a fuse or a way I can disable the windows entirely or just disable the little 1/8" it goes down when you open the door to allow my tint to dry better?

Thanks!

Jeremy

Use the hatch to get in and out?

Sorry!

MarkGideon · 11-30-2012, 01:56 PM

No way that I know of to stop the windows from going down when you open the door. When I got mine tinted, this caused the tint to start peeling back in the corner at the lower front of the window. I took it back to the shop and when he replaced the tint he used a heat gun to cure the tint right after he installed it. I have not had any more problems with it since then.

enkei2k · 11-30-2012, 02:04 PM

there's a sensor that you can keep depressed if I recall correctly that prevents the windows from doing that.

However, any good tint shop will put in more than enough so that it won't matter. I told my tinter about the automatic window thing and he said there's many cars out there that the windows do the exact same thing, not just ours, so they knew how to handle it. I opened and closed my door at least 5 times the same day and didn't have any issues at all.

Cmike2780 · 11-30-2012, 02:15 PM

leave the windows down a bit so it doesn't seal shut completely....just until it dries.

jcosta79 · 11-30-2012, 02:21 PM

If the shop you are taking it to does the job right, it won't matter. The last 4 cars I had, had this same feature where the window goes down automatically and it never affected the tint.

RonRizz · 11-30-2012, 02:49 PM

pop the control panel off, and remove the wire harness. should take about 10 seconds

Projects · 12-01-2012, 03:15 PM

Quote:

Originally Posted by MarkGideon

No way that I know of to stop the windows from going down when you open the door. When I got mine tinted, this caused the tint to start peeling back in the corner at the lower front of the window. I took it back to the shop and when he replaced the tint he used a heat gun to cure the tint right after he installed it. I have not had any more problems with it since then.

Exact same spot where my seems to be peeling!

Alright thanks for the help everyone. Seems my tint guy isn't the best. I had to already re due my drivers door a month earlier.

frost · 12-01-2012, 03:28 PM

Quote:

Originally Posted by jcosta79

If the shop you are taking it to does the job right, it won't matter. The last 4 cars I had, had this same feature where the window goes down automatically and it never affected the tint.

Z-Girl 12 · 12-01-2012, 04:25 PM

Quote:

Originally Posted by MarkGideon

No way that I know of to stop the windows from going down when you open the door. When I got mine tinted, this caused the tint to start peeling back in the corner at the lower front of the window. I took it back to the shop and when he replaced the tint he used a heat gun to cure the tint right after he installed it. I have not had any more problems with it since then.

Mine is peeling back now and its sooo ugly and annoying. Thanks for this tip...when I take it back 2 my tint guy i will give him this solution. Will rep!

Baer383 · 12-01-2012, 04:44 PM

Quote:

Originally Posted by Projects

I recently got my car tinted and it looks fantastic but the windows keep screwing with my tint while its drying. Does anyone know if there is a fuse or a way I can disable the windows entirely or just disable the little 1/8" it goes down when you open the door to allow my tint to dry better?

Thanks!

Jeremy

All you have to do is remove the one screw in the door jamb with the black rubber cover, that will stop the window from dropping when opening.

diddy535 · 12-01-2012, 04:55 PM

It resets when you disconnect the battery. It's a computer program that causes the windows to drop slightly or raise when opening or closing the door. So just disconnect the battery real quick and don't do the "fix" (pushing the window buttons down and holding then up and holding) and they won't move at all when you open/close the door.

Baer383 · 12-01-2012, 05:05 PM

Quote:

Originally Posted by diddy535

It resets when you disconnect the battery. It's a computer program that causes the windows to drop slightly or raise when opening or closing the door. So just disconnect the battery real quick and don't do the "fix" (pushing the window buttons down and holding then up and holding) and they won't move at all when you open/close the door.

I know but it's easier to remove 1 screw problem solved.

Mike · 12-01-2012, 07:02 PM

Quote:

Originally Posted by Baer383

All you have to do is remove the one screw in the door jamb with the black rubber cover, that will stop the window from dropping when opening.

what he said!

Or do like me and just get rid of them altogether. Now I just pop them in when I need them during transport or storage

Baer383 · 12-01-2012, 07:12 PM

Quote:

Originally Posted by Mike

what he said!

Or do like me and just get rid of them altogether. Now I just pop them in when I need them during transport or storage

that's got to be cold in the winter.

11-30-2012, 01:49 PM	#1 (permalink)
Projects Base Member Join Date: Sep 2011 Location: Nebraska Posts: 13 Drives: 11 Nissan 370Z BS M6 Rep Power: 13	Disabling Windows I recently got my car tinted and it looks fantastic but the windows keep screwing with my tint while its drying. Does anyone know if there is a fuse or a way I can disable the windows entirely or just disable the little 1/8" it goes down when you open the door to allow my tint to dry better? Thanks! Jeremy

11-30-2012, 01:56 PM	#3 (permalink)
MarkGideon Base Member Join Date: May 2012 Location: USA, SC Posts: 213 Drives: 2012 370Z Base Rep Power: 12	No way that I know of to stop the windows from going down when you open the door. When I got mine tinted, this caused the tint to start peeling back in the corner at the lower front of the window. I took it back to the shop and when he replaced the tint he used a heat gun to cure the tint right after he installed it. I have not had any more problems with it since then. DEpointfive0 and Z-Girl 12 like this. __________________ 2012 370Z Base Gun Metallic--2015 Altima 2.5SV Gun Metallic--2020 Chevy Silverado RST--1965 Chevy C10 Stepside Shortbed

11-30-2012, 02:04 PM	#4 (permalink)
enkei2k A True Z Fanatic Join Date: Apr 2011 Location: NYC Posts: 6,365 Drives: '12 G41 B/S M6 Rep Power: 3716	there's a sensor that you can keep depressed if I recall correctly that prevents the windows from doing that. However, any good tint shop will put in more than enough so that it won't matter. I told my tinter about the automatic window thing and he said there's many cars out there that the windows do the exact same thing, not just ours, so they knew how to handle it. I opened and closed my door at least 5 times the same day and didn't have any issues at all. __________________ ...need boost...

11-30-2012, 02:15 PM	#5 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 28	leave the windows down a bit so it doesn't seal shut completely....just until it dries. kidkotic2001 likes this. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

11-30-2012, 02:21 PM	#6 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 14	If the shop you are taking it to does the job right, it won't matter. The last 4 cars I had, had this same feature where the window goes down automatically and it never affected the tint. UNKNOWN_370 likes this. __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

11-30-2012, 02:49 PM	#7 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,132 Drives: 2 feet, 3 pedals Rep Power: 6774	pop the control panel off, and remove the wire harness. should take about 10 seconds __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

12-01-2012, 04:55 PM	#12 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 14	It resets when you disconnect the battery. It's a computer program that causes the windows to drop slightly or raise when opening or closing the door. So just disconnect the battery real quick and don't do the "fix" (pushing the window buttons down and holding then up and holding) and they won't move at all when you open/close the door. __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html Last edited by diddy535; 12-01-2012 at 05:00 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Disabling the Remote Window Lowering?	ChrisSlicks	Nissan 370Z General Discussions	44	09-08-2018 09:06 PM
Disabling the parking brake video lock	JoeZ	Audio & Video	14	03-05-2018 12:24 PM
Disabling the windows	oleg	Exterior & Interior	12	11-15-2011 02:02 AM
Disabling TPMS	Glokwork	Wheels & Tires	16	07-27-2011 08:28 PM
Disabling Auto-Off Headlights Timer?	370Z JT	Exterior & Interior	8	03-28-2010 08:46 PM