![]() |
For those in the Florida area my buddy can do alot of headlight modifications. he did his and is now helping out just about anyone that asks. Nut N Much is his handle on here. pm him and he can help you out.
|
I recently tackled this and it took a few days, but saved a ton. I worked on the headlights all week after work and total cost..........Less that $20
After I took apart the headlights, I applied the Krylon Fusion Satin and installed the LEDs. It takes 18 total, but I purchased a couple of extra. The LEDs I purchased cost .48 a piece and the color is around 5000k matching my LED parking lights. The LED's are 5mm with built-in resistors which made things a lot easier. They are super bright and crisp & clean. Here's a link to where I purchased them from: 5mm 12v Pre-Wired LED White Ultra Bright 15,000 mcd http://i269.photobucket.com/albums/j...z/P9250797.jpg http://i269.photobucket.com/albums/j...z/P9250798.jpg http://i269.photobucket.com/albums/j...z/P9300811.jpg http://i269.photobucket.com/albums/j...z/P9300812.jpg http://i269.photobucket.com/albums/j...z/P9300815.jpg |
Quote:
http://www.the370z.com/body-interior...er-2011-a.html |
Quote:
Quote:
$100 crack open/seal fee, I think its $100 to do the landing strip, and some extra to paint... http://www.the370z.com/southern-cali...-modifier.html I will have him do the landing strip and dual halos and upgraded projectors for both once I can scrap together some $$$ |
HouseofHID.com™ - The Premier Source For HID Conversion Kits & Accessories
^good source for any LEDs Owner is an awesome guy. Can get his hands on anything and give you a good deal. |
wow **** talking on 180 and no one knows what they charge...
they are worth every bit of it as an FYI.. im sending my next cars headlights to them again. |
Unless you have worked with 180 or been quoted there is no need for the **** talking on them. They do great work and they do not rattle can paint your headlights... its automotive paint and with an awesome show finish. I and others have worked with them to pioneer new and innovative ideas for our car headlights. They also dont use 5mm LED's... They use a higher end super flux led which lasts longer is more reliable and is brighter.
|
I've seen 180's work and I agree it is excellent work BUT the customer service is SH!T, I put money down had it there for months and nothing was done was given the run around constantly and after being taken for a joke i took my money and spent it on other things. If you don't mind being toyed with then 180 does great work and i suggest it if you have the patience
|
Quote:
After 15 months I call them and they still remember who i was and exactly what i had done. They went above and beyond for my work and kept me up to date. I know this doesn't help your situation but ive come to realize that anytime someone complains on the internet, its never exactly like they say it is. |
Quote:
Quote:
I don't like the landing strips cause no one has cracked the nut on what type of resisters to use, but pfdaxe post looks good: 5mm 12v Pre-Wired LED White Ultra Bright 15,000 mcd I don't advertise, cause I don't want AK made at me. I get 1 or 2 a year, so I don't charge money, I ask for parts for my car instead. So if your in Florida I can help you out, or you can pay 900.00 and wait for them. |
I used 180 on our first 370z. I had to keep calling them to get the lights to me. Found out the plastic tab on the top of the light was broken off (they said during shipment). Was not able to get a new light even with 2k insurance on the package through FedEx. I also payed for a shaved lading strip which was not done.
I was able to look past all of these problems because of the hassle to ship the lights to them. I even went as far as to source them for our new 370z and due to horrible customer service decided they were not worth it to me again. I know every company has there issues every once in a while but two times with the same person is lame. |
Quote:
|
Quote:
Quote:
I would suggest doing this its just $20 and if it doesnt turn out good send it to 180. Worth a shot. |
All times are GMT -5. The time now is 08:02 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2