What year? I am assuming 2008 or later. All I can find is an overall harness with 3 sockets. 2 of the 3 sockets on that harness seem they would work. I am starting my projects this winter and would like to do this when I put in the light.

I'm not sure of the year but it is a newer SUV ,newer than 08.

Thanks, I'll do some digging to see what diagrams I can find with a part number

Looks like a full wire assembly
33502-SZA-A02 (2009 - 2012)
(2) 7443 sockets
(1) 194 socket
are included on that assembly

Need to find a junk yard to cut one off from

Good research :tiphat:

Went to the junk yard over the weekend
The 2009 Pilot did not have the same socket as pictured or noted the number of earlier.

I did find a Toyota Matrix, maybe a 2006 that had a match. It is the same as a few other cars for Toyota. 81555-02210
The upper socket is for a 7443 bulb with 3 wires and the odd triangular shape to it. I will see if it fits once I get the rear light I ordered this morning.

I was guessing at the year it maybe newer than a 2010 but a Honda pilot has them.

i was able to easily reproduce the socket.
Thanks a lot.
I will work on the electrical part tomorrow

I just did this mod recently. Keep in mind that the wire colors displayed on the illustration for the tail light harness are correct, so follow those colors. On your 7443 socket though, dont go by the wire colors, go by the A, B, and C labeling on the harness to discern which is the low filament, high filament, and ground wire.

I made the mistake of relying just on the wire colors and had my low and high filament wires reversed the first time. lol.

Were you able to use the honda plug, like mentioned above?

I'm glad I live in AU, we get FL as standard. :owned:

What kind of bulb did u guys buy? I'm looking to do this mod and found this bulb: http://www.superbrightleds.com/morei...ower-bulb/634/
What u guys think?

Edit: has anybody used this module?http://www.kahtec.com/smart_stop.htm